Topic: [WTS] 5xASICMiner Erupter Blades - page 4. (Read 6599 times)
20k$ hand to hand or SEPA
You should be able to edit, I never have problems editing my posts. Try making it a self-moderated thread.
Edit 300001: Parted blades will inc a block of 4 fans inc cable adapters from 3-4 pin incase you don't have them.
EDIT 30000: Also taking offers for parted blades have a few already by PM. These will only be actioned if the entire blade set is not sold successfully.
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.
@158btc, no thanks.
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.
Friedcat has an additional 4-5 day leadtime assuming he responds immediately, which he doesnt.Thats 12.5 of mining revenue right there.
My blades to UK or EU won't have any customs costs or risk they get held up. His will.
My blades include a prewired PSU worth 1btc
My blades inc 1.5btc of fans
My blades inc 0.8btc of other hardware
My blades inc a mounting system, probably the hardest thing to do for these blades.
Remember several in hand Avalons (same hash rate) have closed for 325-375 only this week. You're right though, lets get it moving.
New start price 250, minimum increments 5 until 275 at which point back to 0.5.
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.
Yes what a ridiculous price.
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.
FML keep forgetting you can't edit in here:
Auction will end Monday 10th @ 11pm GMT+1. I may withdraw the blades from sale or accept PM offers. I don't particularly want to do either but needs may arise. Bids may extend the end time, will see how it goes.
Auction will end Monday 10th @ 11pm GMT+1. I may withdraw the blades from sale or accept PM offers. I don't particularly want to do either but needs may arise. Bids may extend the end time, will see how it goes.
Posted 12 seconds ago, read 23 times 0_O
4x13.05GH on high clock, 2xb2 and 2xb3.5
1x~12.6GH on high clock, b1
=65GH drawing 665W from the wall
Want to sell as I'm now going to be travelling alot over the next 9 months and my parents house is already overheating from all the GPUs xD Moving to group buy income shares.
Includes:
2xB2 blades
2xB3.5 blades
1xB1 blade
Corsair CX750M PSU, prewired powering them all fine and can likely do 6
8 port ethernet switch
19x120mm fans, mix but most are high end, high potential cfm
3x140mm Scythe fans
12 port fan controller
2x 4 pin fan controller
Mounting system - this is my latest revision and by far the best. Temps are way down, fan speeds way down and it conveys the heat AWAY. My room is 4C cooler than previously at the same outside temp! Made from PVC pipe, room for a 6th/7th blade. Easy to extend whole structure if you want to mount more.
Only have 1 picture of this setup as waiting for my proper phone to come back from RMA:
Price to start at 270btc including UK delivery. Minimum increment 0.5 btc please, we don't want to be here all day.
International delivery will be paid by the buyer. Escrow available (John K please) but fee to be paid by the buyer. Customs fees/import duty/local taxes to be paid by the buyer.
1x~12.6GH on high clock, b1
=65GH drawing 665W from the wall
Want to sell as I'm now going to be travelling alot over the next 9 months and my parents house is already overheating from all the GPUs xD Moving to group buy income shares.
Includes:
2xB2 blades
2xB3.5 blades
1xB1 blade
Corsair CX750M PSU, prewired powering them all fine and can likely do 6
8 port ethernet switch
19x120mm fans, mix but most are high end, high potential cfm
3x140mm Scythe fans
12 port fan controller
2x 4 pin fan controller
Mounting system - this is my latest revision and by far the best. Temps are way down, fan speeds way down and it conveys the heat AWAY. My room is 4C cooler than previously at the same outside temp! Made from PVC pipe, room for a 6th/7th blade. Easy to extend whole structure if you want to mount more.
Only have 1 picture of this setup as waiting for my proper phone to come back from RMA:
Price to start at 270btc including UK delivery. Minimum increment 0.5 btc please, we don't want to be here all day.
International delivery will be paid by the buyer. Escrow available (John K please) but fee to be paid by the buyer. Customs fees/import duty/local taxes to be paid by the buyer.
Jump to: