Pages:
Author

Topic: [WTS] [EU] 600pcs BW L21 LITECOIN MINER with PSU, escrow, 110 EUR/pc - page 2. (Read 1281 times)

copper member
Activity: 46
Merit: 2
copper member
Activity: 46
Merit: 2
Hello, i think i was messaging with you on Ebay, could you send me your whechat or whatsapp for better comunication. Thank you
Yes its me. i have sent you a PM
newbie
Activity: 1
Merit: 0
Hello, i think i was messaging with you on Ebay, could you send me your whechat or whatsapp for better comunication. Thank you
copper member
Activity: 46
Merit: 2
newbie
Activity: 4
Merit: 0
I will try this, next day.

No problem with package.

i will use Ebay

Thanks

copper member
Activity: 46
Merit: 2
I buy two pieces on Ebay , i think it's you sell IT.

I found in the miner some fan parts, a connector cut from a Fan , in the two pieces , when you move it your heard moving.

Some cards have  missing plastic retention for the radiator , small white pieces to  maintain radiator to the PCB , i found in the miner this piece , i  need to remove it before start the miner.

I resume , fan conncector and plastic retention in the miner, need to remove it before start miner.

The miner dont go far 400 mhs , i use antminer L3+ and a Innosillicon , in the same environnement, run about 600 - 640 Mhs /second , with fan at 60%

The firmware is 2.8.0 and dont show the temperature of the PCB.



Hi Cedric,

I dont see you among my sales. But nonetheless i will try to help, although i would suggest trying to resolve this through EBAY. Its better to keep it official.

The plastic parts that seem so be around the miner must be due to damage during transport. Did you see any damage on the outside of the package?

The temperature not showing is normal, its the same for all BW L21 miners.

The 400MHS hashrate may be for due to shipping damage. The miner should state 550 MHS in the miners interface.

Please use the following steps:
1. remove and reconnect all PCIE power cables to the miner. Restart miner. If there is no change, please proceed to step 2.
2. Swich PSU with the other miner.  If there is no change, please proceed to step 3.
3. Sometimes during trasport some clients have found that the boards had moved. Please open the miner and push the boards down into their slots.

Let me know if the problem has resolved.
newbie
Activity: 4
Merit: 0
I buy two pieces on Ebay , i think it's you sell IT.

I found in the miner some fan parts, a connector cut from a Fan , in the two pieces , when you move it your heard moving.

Some cards have  missing plastic retention for the radiator , small white pieces to  maintain radiator to the PCB , i found in the miner this piece , i  need to remove it before start the miner.

I resume , fan conncector and plastic retention in the miner, need to remove it before start miner.

The miner dont go far 400 mhs , i use antminer L3+ and a Innosillicon , in the same environnement, run about 600 - 640 Mhs /second , with fan at 60%

The firmware is 2.8.0 and dont show the temperature of the PCB.

copper member
Activity: 46
Merit: 2
Update
around 350 miners left.
copper member
Activity: 46
Merit: 2

HagssFIN has a whole topic dedicated to the miner with firmware updates and different guides. This is probably the best place to find info. I can also find the firmware link for you and post it-
jr. member
Activity: 33
Merit: 1
Please post a link to the firmware updates

Hello - Can you confirm that the power consumption definitely is 820W? have you measured it with the PSU you are providing? AsicMinerValue and this review state its 950 Watts. See links below.

Thanks


https://www.asicminervalue.com/miners/bw/l21

https://1stminingrig.com/bw-l21-litecoin-scrypt-asic-miner-review/



I can confirm (i'm sure also other customers here can confirm as well).

The power usage is between 830 and 850W at 550MH/s.
Here is an image: https://imgur.com/a/lun8iOo

Just to add, i assume the lower power usage in comparison to the linked revies might be due to the firmware updates.
copper member
Activity: 46
Merit: 2
Hello - Can you confirm that the power consumption definitely is 820W? have you measured it with the PSU you are providing? AsicMinerValue and this review state its 950 Watts. See links below.

Thanks


https://www.asicminervalue.com/miners/bw/l21

https://1stminingrig.com/bw-l21-litecoin-scrypt-asic-miner-review/



I can confirm (i'm sure also other customers here can confirm as well).

The power usage is between 830 and 850W at 550MH/s.
Here is an image: https://imgur.com/a/lun8iOo

Just to add, i assume the lower power usage in comparison to the linked revies might be due to the firmware updates.
jr. member
Activity: 33
Merit: 1
Hello - Can you confirm that the power consumption definitely is 820W? have you measured it with the PSU you are providing? AsicMinerValue and this review state its 950 Watts. See links below.

Thanks


https://www.asicminervalue.com/miners/bw/l21

https://1stminingrig.com/bw-l21-litecoin-scrypt-asic-miner-review/


I am offering BW L21 Scrypt miners. Very similar to Antminer L3+

They are all in working order.
They were online 20 days.

Miners have several settings. The basic setting is:

550 MHs at 820W

I offer them with original box and Power supply. The asics are located in Slovenia (EU).

590 390 pieces available.

PRICE: 110 EUR/pc + shipping

Price for larger quantities:
10 pcs: 95 EUR/pc + shipping
25 pcs: 90 EUR/pc + shipping
50 pcs: 83 EUR/pc + shipping
100pcs: 78 EUR/pc + shipping


ESCROW available.

Images:
https://imgur.com/a/RQwZRV8
https://imgur.com/a/74WlYsN
https://imgur.com/a/D6Rgg0K

The shipping I offer in Europe is DPD. The price is around 25-35 EUR, depending on where you live. For up to 3 units the shipping price is more or less the same. Example: the shipping price for 1 piece is around 25 EUR and for 3 pieces its around 30 EUR.

We can offer an official invoice with VAT.
copper member
Activity: 46
Merit: 2
copper member
Activity: 46
Merit: 2
updated the large quantities prices. I hope you will find them interesting.
jr. member
Activity: 71
Merit: 2
I bought from 3 different batches and have 2 different psu, but the weird is that they don't work with Bitmain PSUs
copper member
Activity: 46
Merit: 2
I got a confirmation. We got the HP PSUs with the miners. We bought them rather late so i see they are better than the whitelabel PSU the miners were initially sold with.
copper member
Activity: 46
Merit: 2
The PSUs are from HP. They were ordered together and also were shipped in the same boxes.
jr. member
Activity: 71
Merit: 2
Are these original psus?
Mine are rather different
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
No problem, glad to see another legit seller here. Smiley

It's great detail that you also accept escrow for the payment.
Pages:
Jump to: