Bought 2 of these and I'm very happy with them. The package was busted a bit and the cases endured some scratches but they are super sturdy and well designed.
I got about the same temps as cards in frames with plenty of space between them (~20 cm) but the ones in the cases achieved those temps with about 20% less fan speed. And these were 1080 Ti AORUS cards which are super wide and their cooling is not designed to be used in racks (they push air perpendicular to the card and not lengthwise).
Unfortunately, with the 3 fans I have put in the case (EEC0381B1-0000-G99) these are too loud for my liking and since I have plenty of open space I'll be sticking with open frames for now.
If I were to ramp up mining or if sound wouldn't matter I'd be definitely going with these cases.
And compared to other similar cases these are the cheapest.
Topic: WTS GPU server cases - page 2. (Read 5375 times)
using GPU not worth it. using ASIC better.
... and again some bullshit from a noob !
He does have a trade with caution warning.
using GPU not worth it. using ASIC better.
... and again some bullshit from a noob !
using GPU not worth it. using ASIC better.
I got an answer (THX),
let´s see how it works out over time,
especially my wanted minor mods ^^.
let´s see how it works out over time,
especially my wanted minor mods ^^.
Originally there was space for 7 GPUs. I asked for 6 GPU cases for me - it gives some little extra room and I have Asrock BTC plates for 6 GPUS.
I guess if You need he will build cases for 7 GPUs also. Blueprints never burn.
I guess if You need he will build cases for 7 GPUs also. Blueprints never burn.
Hello.
For how much are you shipping to the UK?
Thanks.
For how much are you shipping to the UK?
Thanks.
Hi,
I send him a PM for 1 unit and get no answer.
Hope he can help me
Thx
I send him a PM for 1 unit and get no answer.
Hope he can help me
Thx
Is it only cases? can used for all board??
Yes he sell only the case
he make custom for you 6-7 Gpu, and all motherboard fit in the case, we order 10 from him, when we receive we make a little review, we trust in flexdesign 
Is it only cases? can used for all board??
Hi @FlexDesign ,
Design looks good so far,
even I´d mention some smaller changes,
2 get a standard server air-flow (from front to back).
2 give you a little promotion, I re-link some of your (bad) pics, 2 make them easy viewable for everyone:
Y7GUpeA (front)
KDSaqWN (mb-space)
KMybOqE (back)
RWanfWB (top-view)
FefbYCh (back2)
Did I get it right, there is space for 6 VGAs ?
Where in the EU are you located ?
How much is shipping to germany ?
Maybe you should contact me, to get a better promotion ^^ .
PanneKopp (aka...)
Design looks good so far,
even I´d mention some smaller changes,
2 get a standard server air-flow (from front to back).
2 give you a little promotion, I re-link some of your (bad) pics, 2 make them easy viewable for everyone:
Y7GUpeA (front)
KDSaqWN (mb-space)
KMybOqE (back)
RWanfWB (top-view)
FefbYCh (back2)
Did I get it right, there is space for 6 VGAs ?
Where in the EU are you located ?
How much is shipping to germany ?
Maybe you should contact me, to get a better promotion ^^ .
PanneKopp (aka...)
20 to 50 euro is just for shipping? how do i get a quote?
Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?
I have bought around 10+ cases. Very good quality and nice cases indeed. Stackable.
I use for cooling 6 x Scythe ultra kaze 120mm fans.About temps:
MSI RX480 open rig:
GPU0 t=68C fan=28%, GPU1 t=71C fan=30%, GPU2 t=72C fan=28%, GPU3 t=69C fan=30%, GPU4 t=72C fan=29%, GPU5 t=59C fan=29%
ASUS RX480 in case:
GPU0 t=64C fan=37%, GPU1 t=63C fan=29%, GPU2 t=61C fan=29%, GPU3 t=64C fan=49%, GPU4 t=64C fan=39%, GPU5 t=64C fan=49%
Thank you. I put in an order a couple of days ago for two for starters. Can't wait.
Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?
I have bought around 10+ cases. Very good quality and nice cases indeed. Stackable.
I use for cooling 6 x Scythe ultra kaze 120mm fans.About temps:
MSI RX480 open rig:
GPU0 t=68C fan=28%, GPU1 t=71C fan=30%, GPU2 t=72C fan=28%, GPU3 t=69C fan=30%, GPU4 t=72C fan=29%, GPU5 t=59C fan=29%
ASUS RX480 in case:
GPU0 t=64C fan=37%, GPU1 t=63C fan=29%, GPU2 t=61C fan=29%, GPU3 t=64C fan=49%, GPU4 t=64C fan=39%, GPU5 t=64C fan=49%
We ship from Latvia
Price for EU countries is around from 20 - 50 eur per case
One client told me that temperature is by 10 degrees lower comparing to normal open wooden RIGS ( with rear and middle fun setup)
here is 3 possible solutions for front panel http://i.imgur.com/SG991o5.png
Price for EU countries is around from 20 - 50 eur per case
One client told me that temperature is by 10 degrees lower comparing to normal open wooden RIGS ( with rear and middle fun setup)
here is 3 possible solutions for front panel http://i.imgur.com/SG991o5.png
+1 from where?
+1
I would like to know the price to ship one or 2 in France.
thx
I would like to know the price to ship one or 2 in France.
thx
from where exactly do you ship?
possibly interested in a few
possibly interested in a few
Hey, anyone who has similar cases can tell me what are the temperatures of the cards compared to the usual open rig with plenty of space between the cards?
Jump to: