Topic: [WTS] Habanero board with Corsair H100i water cooling system in Canada (Read 1934 times)
July 15, 2014, 08:20:18 AM
Sold
July 14, 2014, 11:19:02 PM
I just got a last minute offer for 0.95BTC ...
Countdown for closing time:
Countdown for closing time:
July 14, 2014, 10:19:55 PM
Finally I'm back home and I want to mention that I received multiple offers via PM.
So far the highest is at 0.9BTC shipped to Ohio US.
So far the highest is at 0.9BTC shipped to Ohio US.
Last chance to post your offers for this Habanero ... (The highest offer is still at 0.9BTC)
I plan to close it tonight around 11:30pm EST (in about 1 hour).
July 14, 2014, 08:30:27 AM
Finally I'm back home and I want to mention that I received multiple offers via PM.
So far the highest is at 0.9BTC shipped to Ohio US.
So far the highest is at 0.9BTC shipped to Ohio US.
July 12, 2014, 03:03:53 PM
Die temp can be dropped significantly using Liquid Pro TIM...
What are u using for a TIM?
I switched from AS5 -> Liquid Pro on my habs and it dropped temp a good 15-20C
What are u using for a TIM?
I switched from AS5 -> Liquid Pro on my habs and it dropped temp a good 15-20C
Right now I'm using the factory TIM applied on the water block from Corsair H100i cooling system. I did not try AS5 or Liquid Pro because I was concern with the TIM conductivity.
July 12, 2014, 01:59:24 PM
Die temp can be dropped significantly using Liquid Pro TIM...
What are u using for a TIM?
I switched from AS5 -> Liquid Pro on my habs and it dropped temp a good 15-20C
What are u using for a TIM?
I switched from AS5 -> Liquid Pro on my habs and it dropped temp a good 15-20C
July 12, 2014, 04:46:57 AM
0.67B 
July 12, 2014, 12:26:51 AM
0.65BTC
I'm partial to this one, I think it might have started as one of my personal boards.
I'm partial to this one, I think it might have started as one of my personal boards.
Your guess is correct, this is the board I got from you in exchange for the one with issues.
July 12, 2014, 12:10:42 AM
0.65BTC
I'm partial to this one, I think it might have started as one of my personal boards.
I'm partial to this one, I think it might have started as one of my personal boards.
July 11, 2014, 06:52:17 PM
0.61B 
July 11, 2014, 06:43:06 PM
*nod* Ok, still a fair bit of power. I like the dual lines of FETs around the chip, excellent design.
My bid was overbid, so I'll stop hijacking this. :-)
My bid was overbid, so I'll stop hijacking this. :-)
July 11, 2014, 05:44:26 PM
Runs at 100c+ indicated? That's a hot little power supply ground plane. When you get to 120-150c you start shoot-through on your FET pairs.
Interesting.
C
That's the actual die temp. The board temp will be lower. Interesting.
C
July 11, 2014, 05:09:04 PM
Runs at 100c+ indicated? That's a hot little power supply ground plane. When you get to 120-150c you start shoot-through on your FET pairs.
Interesting.
C
Interesting.
C
July 11, 2014, 04:34:52 PM
0.6BTC + ship.
July 11, 2014, 02:33:29 PM
0.58B + shipping 
July 11, 2014, 02:16:35 PM
0.57
July 11, 2014, 01:10:29 PM
Also if possible can you post some cgminer stats? Just curious what sorta HW errors these get.
Here is a screenshot with current stats:
July 11, 2014, 12:56:41 PM
.56BTC I pay shipping
July 11, 2014, 10:06:32 AM
July 11, 2014, 10:02:30 AM
Also if possible can you post some cgminer stats? Just curious what sorta HW errors these get.
Jump to: