Topic: WTS LiteCoin Rigs And Litecoin SUPER COMPUTER*!*!* - page 2. (Read 4807 times)

Well Done good sir. Ill be in touch about buying one.

Most use a 6870 that has a cypress 5870 chip which puts off 420 kh/s  ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814202032 )it uses the memory from a 6870 but the core of a 5870 one of the best litecoin miners out there. Read the reveiws from NewEgg to verify what I am saying which means the rigs puts off 1700 to 2600 kh/s.

Hey guys I am sorry it is taking so long to get pictures up I got all the pictures taken, but realized after I was all done the settings on the camera were off and they were all blurry so if not tonight itll be tomorrow at the latest.Now I wouldn't expect nor would I sell any of them without showing pictures first but just to give an idea from offers and my thinking about prices this is a round abouts (though of course deals can be made)

1650kh/s 5x5850 open rig  $1600

1700kh/s 4x6870 open rig w/1000w PSU $1700

1700kh/s 4x6870 open rig w/1250w OCZ PSU $1750 --- In case w/ DVD +$100 w/ for Custom Top Mounted 10" 1000CFM Fan +$50

2100kh/s 5x6870 open rig w/1250w OCZ PSU $2000 --- In Case w/1300w Rosewill PSU & DVD $2200 w/ Custom Top Mounted 10" 1000CFM Fan + $50

2500kh/s 6x6870 open rig w/1375w Thermaltake & 600w PSUs $2400 --- w/1600w PSU + $150

3200kh/s 7x6950 open rig w/1600w & 600w PSUs - $3500 *NEW*

3150kh/s 6x6970 open rig w/1300w Rosewill & 600w PSUs $2800

NUCLEAR DAWN 4900kh/s Cased Rig w/1475w Thermaltake & 1300w Rosewill  $5500



Now since I know there is not a person out there who will offer exactly what the prices are because everyone wants to haggle so I added haggle room

You will understand better with pictures but if you want one of the rigs that has 5 or less cards in a CoolerMaster Half X Case with a top mounted 1000CFM fan for extreme cooling it can be done for an extra $150

I will not split up rigs to make them fit in a case so no 5 6970s to go in a case or anything like that.

When I was writing this up the other night it was late and not everything was perfect this is updated slightly

Motherboards - AsRock 970s, Gigabyte UD5s & UD7s and an EVGA 160 Super MOBO

• The Crown Jewel which is my main comp uses 3 x Reference XFX 7970s and 3 x Reference PowerColor 7950s all liquid cooled by EK Water Blocks 8 Core AMD 8350 16gb Corsair Dominator 1866 2 256 SATA III SSDs in Raid 0 2 2gb 7200 RPM HDD in Raid0 Tri Radiator setup 1 x 360mm and 2 x 240mm Each with Push Pull Fans (Red LED Fans Visible High Powered Delta Fans Hidden sme up 20 150 CFM) Cooling the RAM CPU and GPUs in A Rosewill BlackHawk Super Tower With a Gigabyte 990FX UD-7. 1x Thermaltake 1475w PSU Mounted in Rear PSU Slot 1 x Custom 1250w OCZ PSU Mounted Below the HDD
  
  The Case is show quality all UV Red with Multiple LED Lights, UV Reactive Sleeving, LED WaterBlocks, 4 5.25in Front Slots - (From Bottom to top) Slot 1&2 - Front Mounted Red LED Backlit Resevoir, Slot 3 -5 Knob Fan Controller which controls all high noise fans and has 2 USB 3.0 and SD card Reader, Slot 4 - 4 Custom Metallic Red Military Switches which control all red LEDs and Red LED fans so the case can run dark. Inside under the HDD there is a 3.5 52 in one card reader with SSD SD USB Fire Wire and so forth.
  
  Front - Along with the 4 5.25 Drive Bays There are 2 Red LED Fans One Has a Custom Cut Laster Engraved Skull Fan cover They both cool the HDD and Secondary PSU
  
  Top - Towards the front is hookups for audio, head phones an external HDD Dock 2 USB 3.0 sockets and then in the middle is an external Blu-Ray Player Secured to the top but an addition to the case. All the wiring is completely hidden through drilled holes in the top and the rear of the case. The Blu-Ray Player is a top of the line and the external case has extra SATA III USB 3.0 and USB 2.0 Both male and Female.
  
  Doors #1 (if looking at the front of the case) Right Door Custom Hole cut for  Digital Thermometer with 5 read outs 2 Monitor GPUs, 1 Monitors CPU, 1 Monitors Resevoir, 1Monitors Ambient temperature around Motherboard close to Ram, also monitors fan speeds of crucial fans that should be always running at 100% Also there is a Red LED Fan Behind the Motherboard Blowing Out With another Custom Cut Laser Engraved Skull Fan Cover
  
  Door #2 Custom Red LED Push Button Drilled in Controls the 9 mounted 120 mm Fans the Center Fan is a Red LED with another Skull Plate Cut In to center of Door. Mesh Covers the rest of the Fans which are in 3x3 setup. Custom Cutout for Secondary PSU's Powersource. Red LED and the remaining 8 fans run seperate from eachother so the whole computer can go dark. Custom Easy Remove Wire with spool to allow for th door to moved 2.5 feet before disconnect and only 1 wire is needed to disconnect.
  
  All sleeving is well hidden but still everything is sleeved to match and what does need to be shown looks in perfect order. All Tubes for liquid cooling are cut to length but enough is left so easy removal of and the blocks is done without much effort and resevoir is easily drained by sliding out he front.
  
  Windows 7, and 8 are installed since Windows 7 only allows for 4 7000 series GPUs I had to install Windows 8 because it allows for up to 6 GPUs, but I still used Windows 7 for most things.
  
  It is my masterpiece. Now I know a picture is worth a 1000 words and pictures will be coming soon. If you feel so inclined as to make an offer of course you are never held to it, but if you make an offer and wish to change it after the pictures arrive (My guess is the offer would only go up) but I would not hold you to your original offer.

I have not decided a price on any of them but am open to offers. Since there was so much information to write I could not go in to the specs of every single computer. Any rig that you are interested in I will happily give you all the specs and a list of all items that are in the system as well as detailed pictures and more information on how long the machine has been running and so on so forth.

Pictures shall be posted within a few days just minor camera troubles at the moment. But again since there are so many rigs only pictures of the rigs will be taken to give an overall view of the rigs but for detailed photos will come upon request.

Thank you for taking the time to read this curious to see if anyone has an interest in prebuilt rigs because if people do like them I may make more one day. Please feel free to post or PM me any questions. Thank you again