Topic: [WTS] Open Frame Rig - page 2. (Read 2753 times)
interested. willing to buy!! whats the awesome total price inc post to aus. will buy alot more in the future, like to see how this will go out about. pm if you can
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore
Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?
Option 3:
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw
thanks!
Can you make them stackable?
yes but it need more materials, it will be like mine
but to be honest it's better if you buy a shelf like this
https://www.amazon.com/Gracious-Living-4-Shelf-Light-Shelf/dp/B0083ESFAM/ref=sr_1_5?ie=UTF8&qid=1477031788&sr=8-5&keywords=plastic+shelf
that can handle many of them, than stacking one on top of each other, it's more easy to move in this way
Can you make them stackable?
Been wondering this myself
Can you make them stackable?
Here are some pictures :
(still don't know how to put them in the body)
https://drive.google.com/open?id=0B1pT04MB3X0adl9jalpSdXg5Rkk
https://drive.google.com/open?id=0B1pT04MB3X0acUtReUdWcVBsVnc
Cheers !
(still don't know how to put them in the body)
https://drive.google.com/open?id=0B1pT04MB3X0adl9jalpSdXg5Rkk
https://drive.google.com/open?id=0B1pT04MB3X0acUtReUdWcVBsVnc
Cheers !
price reduced to 0.12 due to btc rise
tnx for the opinion, and the bump
pictures are also welcome for others to see how it looks assembled, i can't do it because ironically i don't have this frame, mine is different because it was my first design
pictures are also welcome for others to see how it looks assembled, i can't do it because ironically i don't have this frame, mine is different because it was my first design
I'd like to leave a big vouch for this man. Received my frame and assembled. The frame itself is aesthetically pleasing, and I seated my rig components with no issues. Will be buying more from him in the future.
anyway i fixed that issue, with the next design, better placement for the psu and a flat bar instead of square one, i only have this bad resolution image for now
Okay actually I'm a moron, I just have tu put the card a little up so that it's the USB and not the card resting on the frame, it's still all fine
PS : enjoy the bump mate !
PS : enjoy the bump mate !
Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
yeah those were my two options at least, but the small bar can not be attached to the connectors, so you need to screw it, but not above the other side bars, or you will end up with the card not on the same plane, due to the thickness
Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
I hope this was clear, I'll make a drawing if it's not
Cheers,
Q.
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing
Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now
yeah i knew about that possible issue, in fact i moved that bar 2 cm toward the right, but it seems that it was not enough, those risers are very long
mh i'll think about a new solution or just move even more that bar on the right(i didn't this because for small gpu it would be an issue to have that bar too far away, i don't want that the gpu angle toward the bottom)
can you tell me if 2cm would be enough so the risers will not bend that way?
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing
Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue
Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480
i'm building and selling these if someone is interested
price: 0.08 btc + shipping
you can screw both psu and ssd to the rig, MB is screwed with M3 nylon screw, 100% insulated, that white wireway is for insulating the bottom of the gpu when you place over it
price: 0.08 btc + shipping
you can screw both psu and ssd to the rig, MB is screwed with M3 nylon screw, 100% insulated, that white wireway is for insulating the bottom of the gpu when you place over it
Jump to: