Pages:
Author

Topic: [WTS] PCI-E - PCI-E/Bare Wire power cables - Free Samples (Read 1592 times)

hero member
Activity: 735
Merit: 500
★YoBit.Net★ 350+ Coins Exchange & Dice
cool still never got my review units to test lol
full member
Activity: 156
Merit: 100
full member
Activity: 156
Merit: 100
Bump, price reduced.
hero member
Activity: 628
Merit: 504
Allright so back after some testing!

I used 4 of them on my avalon 4 draining about 180w on each, the cable got a tiny bit warm, so I let them run for 6 days when I was out of my home and all was good when I came home.

I also used 2 of them on my s5 (1 per card, to test their limits), once again it got a lillte warmer but still able to touch it and keep your hands on the cable with no problems, I left them like this for 2 days while closely monitoring, no traces of melting or smell of burn. That's 250-260w/cable

Last, I overclocket my s5 so it would eat up about 700w, with 1 cable per card and let them run for 24hrs, the cables where pretty hot in the end so I decided to stop the experiment, from my experience they would have melted in a few days at that power draw (and that's completely normal of course!)


TL;DR : great build, under 250w/cable no worries, don't go over 300 (nowadays miners usually don't go over 250w/cable so good as gold)

Thanks for the great service man, I left you some positive trust because you deserve it!

Cheers,
Q.
hero member
Activity: 735
Merit: 500
★YoBit.Net★ 350+ Coins Exchange & Dice
i am guessing the mail or who you used to ship me the cable lost it
full member
Activity: 156
Merit: 100
Nice, I'm glad you got them... Leave some feedback if possible...

Thanks
hero member
Activity: 628
Merit: 504
I have just recieved my 10 pcs cables, trying them on tomorrow at about 175w / cable, will report with photos once they run a bit, but they look really nice for now!

I'll leave you some trust this weekend once I tested them mate, nice doing business with you!
full member
Activity: 156
Merit: 100
Hello,

I appreciate your info, but as you can see I have never stated price for 50pcs, for sure price will go down with bigger quantity order.

Anyhow I will for sure revise prices today...

All the best
full member
Activity: 156
Merit: 100
hero member
Activity: 628
Merit: 504
Allright thanks for answering mate, I'll order in a week or so, waiting for BTC to reach the moon Smiley

Will PM you when I'm ready, good luck on other sales
full member
Activity: 156
Merit: 100
Hi mate,
How many watts can you pass through that cable without it melting?

I can't seem to find a good chart online for awg => amps conversion...

Also how much for a 10 pack shipped to France zip 01000?

Hello,

I have never tried to melt them Cheesy I know that I ran S7 with only 2 lanes per board so around 233W per cable, and the cable is not even warm, but anyhow I guess that it is more likely that the PCI-E connector will melt and fail than the cable itself with higher current.

Shipping is around 10$ so 10 Pack would be 50$.

All the best



hero member
Activity: 628
Merit: 504
Hi mate,
How many watts can you pass through that cable without it melting?

I can't seem to find a good chart online for awg => amps conversion...

Also how much for a 10 pack shipped to France zip 01000?
full member
Activity: 156
Merit: 100
if theres room for a pcie to pcie sample cord i would like to test it on my s1 that i have

Hi, send me your address, and I'll ship one to you.

I seen your ebay listing too rather than sending a PM or ebay message

are these made from super flexible silicone (like high current RC cables)?

No those are made from PVC insulation, I can record a video of how it flex in hand, it is flexible, but not as a silicone insulated one.
member
Activity: 63
Merit: 10
Mining away one KWh at a time
I seen your ebay listing too rather than sending a PM or ebay message

are these made from super flexible silicone (like high current RC cables)?
hero member
Activity: 735
Merit: 500
★YoBit.Net★ 350+ Coins Exchange & Dice
if theres room for a pcie to pcie sample cord i would like to test it on my s1 that i have
full member
Activity: 156
Merit: 100
Sample sent today. Hope you will like it.
newbie
Activity: 44
Merit: 0
One test cable reserved to me. Smiley
full member
Activity: 156
Merit: 100
Ok, so I would like to give away 4 of those cables for free, 2 PCI-e to bare wire and 2 PCI-e to PCI-e as a sample... All you need to do is write a few words after you receive cable and have tested them out.

I will send 1 cable per user, so 4 different persons should get 1 cable to test...

So if anyone is interested PM me please.

Cheers
full member
Activity: 156
Merit: 100
Ok. Thanks anyway.

If you want I can make shorter cables also. PM me if that sound good to you.
legendary
Activity: 1218
Merit: 1003
As I said it was measured by hand...

But that gave me an idea, if you want PM me your address, and I'll send you free sample, so you can write some kind of review, so other users can have some insight regarding cable quality.

All the best

I need cables for my S9, not sample  Smiley

And 60 cm is a bit too long for 2x S9 and 4 kw psu


Click to enlarge
Pages:
Jump to: