Topic: [WTS] SP30 4,5 TH/S, SP35 5,5 TH/S & A2 innosilicon TERMINATOR 90 MH/S Scrypt (Read 439 times)
September 30, 2015, 01:56:03 PM
Please post photos and do you accept ESCROW?
September 30, 2015, 07:49:18 AM
As the title says i want to Sell off 3 Miner's Because i don't have enough space to house them anymore. (Moving out* and have to quit mining)
The SP30 Has been active since 2014 January 30th.
The SP35Has been active since 2014 October 15th.
The A2 TERMINATOR since 2014 October 10th.
Located in Sweden, Linkoping
Absolutely nothing wrong with them, and i would have kept them if i could... trust me. Selling them is a last resort on this issue that i have.
Some info of miners:
The Hashrate of of my SP30 push out well above 4.5 TH/s but stays at it lowest 4.4TH/S.
The Hashrate of of my SP35 push out well above 5.7 TH/s but stays at it lowest 5.4TH/S
The A2 TERMINATOR stays well above 90 MH/S steady and can go upwards 120 MH/S from time to time and around 85MH/S lowest depending on if you Overclock it or not. It Has an Raspberry PI built in with an SD card in the slot which is included in the deal.
Same goes for the SP30 and SP35 its not an Raspberry pi inside but has its own computer running CGminer with latest's updates. It is very easy to access its panel after you plug and play you type in myminer.io in the Web-browser (when your on the same network/router) and you get into the interface where you can play around with settings and set your Pools and so on.
Both miners come with PSU Builtin and power-cords included. cords are EU standard so sorry UK and US, But i bet you got some laying around ready to plug in...
Usefull links about Miners:
SP30 & SP35: https://bitcointalksearch.org/topic/ann-spondoolies-tech-carrier-grade-data-center-ready-mining-rigs-521520
A2: https://www.cryptocoinsnews.com/innosilicon-a2-terminator-scrypt-asics-first-28nm-chips-litecoin-dogecoin-mining/
adding the Over Clock image that helped me bump up the hash-rate, Probably new versions out there since i checked. So if you want to write an new OC image on the SD card feel free. I did mod the A2 several times befor i got it on a good speed i wanted.: https://bitcointalksearch.org/topic/ultra-under-overclock-image-for-a2-innosilicon-by-emdje-v50-672969
Here are some recent pictures of them taken on 2015-07-02, Also most recent Hashing speed's for the miners, before they both got unplugged:
The Hashrates:
http://imgur.com/a/btHot
*Note the hash-rates as for all miners may wary on the conditions such as your networkspeed and location to the poolserver. The Pictures show both miners hashing at www.MiningRigRentals.com Pointed at Nicehash.com with an ping of 5.57ms avrage. Noteworthy is aswell that i have 250MB/s download and 10MB/s UP
The Miners:
http://imgur.com/a/cA4CK
Note* Miners are in all-most perfect conditions, The SP30 has not been tampered with except i have been taking off the side Server-rack once. The A2 Terminator has been opened once for initial setup with an Video cord from the Raspberry PI. Nothing else has been modified. The fans are still Stock and the Boards have not been touched at all.
If they are anything for you PM Me here on forums and ill get back to you as soon i can
Offers accepted in BTC Euro USD or SEK
payments preferred: Escrow paypal Swish or just Plane BTC for quickest deal
Done some research and seen people settled on a price around 1500-1800 $ for a SP3X.
So the price is now set in Dollars because the volatile price of BTC atm.
The price being set in dollars does not affect the way i can receive funds for the miners. I can still take BTC, € or $ or even SEK.
the A2 price remains the same.
BID, Asking prices, most current:
SP30: 1500 $
SP35: 1700 $
A2 TERMINATOR: 1100 $
*Note Prices are not set. just suggested.
Make Offers in USD plz
BTC Equivalent deals will be set in the dayily current BitcoinPrice
The SP30 Has been active since 2014 January 30th.
The SP35Has been active since 2014 October 15th.
The A2 TERMINATOR since 2014 October 10th.
Located in Sweden, Linkoping
Absolutely nothing wrong with them, and i would have kept them if i could... trust me. Selling them is a last resort on this issue that i have.
Some info of miners:
The Hashrate of of my SP30 push out well above 4.5 TH/s but stays at it lowest 4.4TH/S.
The Hashrate of of my SP35 push out well above 5.7 TH/s but stays at it lowest 5.4TH/S
The A2 TERMINATOR stays well above 90 MH/S steady and can go upwards 120 MH/S from time to time and around 85MH/S lowest depending on if you Overclock it or not. It Has an Raspberry PI built in with an SD card in the slot which is included in the deal.
Same goes for the SP30 and SP35 its not an Raspberry pi inside but has its own computer running CGminer with latest's updates. It is very easy to access its panel after you plug and play you type in myminer.io in the Web-browser (when your on the same network/router) and you get into the interface where you can play around with settings and set your Pools and so on.
Both miners come with PSU Builtin and power-cords included. cords are EU standard so sorry UK and US, But i bet you got some laying around ready to plug in...
Usefull links about Miners:
SP30 & SP35: https://bitcointalksearch.org/topic/ann-spondoolies-tech-carrier-grade-data-center-ready-mining-rigs-521520
A2: https://www.cryptocoinsnews.com/innosilicon-a2-terminator-scrypt-asics-first-28nm-chips-litecoin-dogecoin-mining/
adding the Over Clock image that helped me bump up the hash-rate, Probably new versions out there since i checked. So if you want to write an new OC image on the SD card feel free. I did mod the A2 several times befor i got it on a good speed i wanted.: https://bitcointalksearch.org/topic/ultra-under-overclock-image-for-a2-innosilicon-by-emdje-v50-672969
Here are some recent pictures of them taken on 2015-07-02, Also most recent Hashing speed's for the miners, before they both got unplugged:
The Hashrates:
http://imgur.com/a/btHot
*Note the hash-rates as for all miners may wary on the conditions such as your networkspeed and location to the poolserver. The Pictures show both miners hashing at www.MiningRigRentals.com Pointed at Nicehash.com with an ping of 5.57ms avrage. Noteworthy is aswell that i have 250MB/s download and 10MB/s UP
The Miners:
http://imgur.com/a/cA4CK
Note* Miners are in all-most perfect conditions, The SP30 has not been tampered with except i have been taking off the side Server-rack once. The A2 Terminator has been opened once for initial setup with an Video cord from the Raspberry PI. Nothing else has been modified. The fans are still Stock and the Boards have not been touched at all.
If they are anything for you PM Me here on forums and ill get back to you as soon i can
Offers accepted in BTC Euro USD or SEK
payments preferred: Escrow paypal Swish or just Plane BTC for quickest deal
Done some research and seen people settled on a price around 1500-1800 $ for a SP3X.
So the price is now set in Dollars because the volatile price of BTC atm.
The price being set in dollars does not affect the way i can receive funds for the miners. I can still take BTC, € or $ or even SEK.
the A2 price remains the same.
BID, Asking prices, most current:
SP30: 1500 $
SP35: 1700 $
A2 TERMINATOR: 1100 $
*Note Prices are not set. just suggested.
Make Offers in USD plz
BTC Equivalent deals will be set in the dayily current BitcoinPrice
Jump to: