i know this is an old thread,
but does any one have this img file for raspberry pi ?
the next question, any one know how or if its possibly to driect connect a v1.2 blade to a pie ? or any schematics for v.1.2 blade ?
Topic: Ultra Under-overclock image for A2 Innosilicon by Emdje - V5.0 (Read 79798 times)
November 23, 2017, 07:59:57 AM
do you think your A2-firmware would run on an A4 ?!
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
It might.....
I have not seen the software, but I assume they have used the same source.
They used the source of the A1 for the A2 as well, and judging from the interface it looks pretty similar.
But I don't know if the hardware side is the same and all the dependencies are the same.
Would love to know if it did.
Ahh, bugger... tried it but chips count is wrong and it starts nagging about everything..
found the cgminer 3.9 dirty source for the A4/A2.. so i'll go play around there..
(https://github.com/Binary4/cgminer-3.9.0-a4-12-dg)
Did you use cgminer 4.1 for some parts ? (if so, which one).
Cheers..
November 22, 2017, 02:44:30 AM
do you think your A2-firmware would run on an A4 ?!
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
It might.....
I have not seen the software, but I assume they have used the same source.
They used the source of the A1 for the A2 as well, and judging from the interface it looks pretty similar.
But I don't know if the hardware side is the same and all the dependencies are the same.
Would love to know if it did.
November 21, 2017, 05:27:34 AM
do you think your A2-firmware would run on an A4 ?!
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
I'll give it a try, if i can find your cgminer version. (no need for a complete image)
it has 20 chips per blade (20*4=80 chips total)
Cheers..
November 20, 2017, 10:47:19 AM
Note that the default frontend is set-up for 6 chip blades, meaning that the MH/s values and so on. I will upload other versions of the frontend later that you can manually replace.
Hi!If there any firmware image for 5 chip blades?
I tried v4 and v5 image, but my A2 110mh with 5 chip blades does not working correctly.
No I do not have a version for a 5 chip blade.
Innosilicon never designed such a version.
Good luck with the search for a working version.
November 19, 2017, 11:17:02 PM
Note that the default frontend is set-up for 6 chip blades, meaning that the MH/s values and so on. I will upload other versions of the frontend later that you can manually replace.
Hi!If there any firmware image for 5 chip blades?
I tried v4 and v5 image, but my A2 110mh with 5 chip blades does not working correctly.
September 26, 2017, 08:58:07 AM
Hi
Know this is an old thread, but the extranounce feature would be very good to have. Is there any chance of getting this firmware/driver running on the 12chip version of A2? (blue card)
I can provide logs if necessary, error is not any A1 / A2 boards found. Someone suggested this could be related to the reset-command not working?
i tried all version, in this thread but all gives error Not any A2 board found, also tried the A2mini image - gave error Not any A1 boards found.
ANX-edition is working, but as I understand that is with stock cgminer version...
-stado
Know this is an old thread, but the extranounce feature would be very good to have. Is there any chance of getting this firmware/driver running on the 12chip version of A2? (blue card)
I can provide logs if necessary, error is not any A1 / A2 boards found. Someone suggested this could be related to the reset-command not working?
i tried all version, in this thread but all gives error Not any A2 board found, also tried the A2mini image - gave error Not any A1 boards found.
ANX-edition is working, but as I understand that is with stock cgminer version...
-stado
September 09, 2017, 03:16:44 PM
So iv tried to create a new sd card and it is not showing up on my pi would anyone be able to make a working image and sell it
You might use an older version of the image, that might work better.
Image is not maintained anymore though due to lack of time and because my miner broke down
Image is not maintained anymore though due to lack of time and because my miner broke down
I have no clue to why it suddenly does not work anymore 
. Great that it works on a different pool though
. Great that it works on a different pool thoughFound reason - worker login. Need to use prefix on that pool and i forgot about that)
Minig working fine but after some work time web interface become unaccesible. And no temperature information on real time monitor page (Emdje - Under and Ultra-Overclock version 5.0).
I have no clue to why it suddenly does not work anymore . Great that it works on a different pool though
. Great that it works on a different pool though Have you tried a different pool address?
Sorry, didn't do that on first try. Tried today - worked with other pool.
Can you tell - what it can be? I mine on them earlier this year with this miner and all be fine. Pool is working and accessible.
Have you tried a different pool address?
Good day
I have LKETC A2 Miner with 4 board (60Mh). My SD card is broken, and i do not have copy of it (my mistake). Trying to install your firmware - web working, i can change settings, but miner not start mining. Do your firmware is suitable for my miner? If so - where can i change number of boards?
Found some log's
What wrong with servers? I miss something?
Network same as on my pc and connected thru a router, no firewalls and blocked ports.
192.168.1.x - network
8.8.8.8 - dns
I have LKETC A2 Miner with 4 board (60Mh). My SD card is broken, and i do not have copy of it (my mistake). Trying to install your firmware - web working, i can change settings, but miner not start mining. Do your firmware is suitable for my miner? If so - where can i change number of boards?
Found some log's
Quote
[2017-07-02 23:42:41] Probing for an alive pool
[2017-07-02 23:42:41] Failed to resolve (?wrong URL) /:80
[2017-07-02 23:42:41] Pool 1 slow/down or URL or credentials invalid
[2017-07-02 23:42:51] Waiting for work to be available from pools.
[2017-07-02 23:42:51] Failed to resolve (?wrong URL) /:80
[2017-07-02 23:42:51] Pool 2 slow/down or URL or credentials invalid
[2017-07-02 23:43:41] No servers were found that could be used to get work from.
[2017-07-02 23:43:41] Please check the details from the list below of the servers you have input
[2017-07-02 23:43:41] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-07-02 23:43:41] Pool: 0 URL: stratum+tcp://hash-to-coins.com:3333 User: 60Mh Password: dfktyjr
[2017-07-02 23:43:41] Pool: 1 URL: http:/// User: / Password: /
[2017-07-02 23:43:41] Pool: 2 URL: http:/// User: / Password: /
[2017-07-02 23:43:41] No servers could be used! Exiting.
[2017-07-02 23:42:41] Failed to resolve (?wrong URL) /:80
[2017-07-02 23:42:41] Pool 1 slow/down or URL or credentials invalid
[2017-07-02 23:42:51] Waiting for work to be available from pools.
[2017-07-02 23:42:51] Failed to resolve (?wrong URL) /:80
[2017-07-02 23:42:51] Pool 2 slow/down or URL or credentials invalid
[2017-07-02 23:43:41] No servers were found that could be used to get work from.
[2017-07-02 23:43:41] Please check the details from the list below of the servers you have input
[2017-07-02 23:43:41] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-07-02 23:43:41] Pool: 0 URL: stratum+tcp://hash-to-coins.com:3333 User: 60Mh Password: dfktyjr
[2017-07-02 23:43:41] Pool: 1 URL: http:/// User: / Password: /
[2017-07-02 23:43:41] Pool: 2 URL: http:/// User: / Password: /
[2017-07-02 23:43:41] No servers could be used! Exiting.
What wrong with servers? I miss something?
Network same as on my pc and connected thru a router, no firewalls and blocked ports.
192.168.1.x - network
8.8.8.8 - dns
I don't have a solution for you 
Maybe Anx has a solution, he has a slightly different version of the software: hhtp://bitcointalk.org/index.php?topic=1141802.0
Maybe Anx has a solution, he has a slightly different version of the software: hhtp://bitcointalk.org/index.php?topic=1141802.0
Does any1 have a working image for a Raspberry Pi 3 Model B?
My Psu Went bust and with it the Raspberry pi model A. Since there is no old ones selling atm i just bought a Pi 3 model B and to my supprise it didnt work at all. Dont know whats wrong tbh, I hook up the newly bought 40 to 26 gipo cable to the new Pi 3 and use the Emdje v 3.1 v 5.0 and original. And nothing happens. try to scan the network and cant find any ip belonging to the A2 or Raspberry. Please help if you have an solution to my problem.
My Psu Went bust and with it the Raspberry pi model A. Since there is no old ones selling atm i just bought a Pi 3 model B and to my supprise it didnt work at all. Dont know whats wrong tbh, I hook up the newly bought 40 to 26 gipo cable to the new Pi 3 and use the Emdje v 3.1 v 5.0 and original. And nothing happens. try to scan the network and cant find any ip belonging to the A2 or Raspberry. Please help if you have an solution to my problem.
Hello,
I have a problem with a A2 Terminator that I can't seem to figure out. I scanned all 26 pages here and it doesn't seem that anyone else has had anything close.
When the unit powers up it appears to hash normally according to the software stats. However, after about 30 seconds the rate starts to drop (each board) and after about 2 minutes all end up at zero.
I have tested most of the hardware/software and can rule out the following:
PSU - New, replacement is a 1300 Gold
Pi - Tested in another machine and works fine
Cables/Cat5e connection - All work fine
Software - Original software that worked before this problem started. Also works in other machines
Can anyone point me in a possible direction? I am at a loss.
Thanks,
Anthony
Fans working correctly?
It sounds like you might have an airflow issue and are overheating.
Anyone have orginal image file for A2 miner? Thanx!
The A2 image was never made to use WiFi out of the box, I think you still need to install some packages to get that going, but I am not sure anymore it is a long time ago since I got the WiFi to work on mine.
hi there iam having trouble making my a2 100mh wifi as anybody got any ideas
cheers
cheers
What receiver do you use, and which image?
Jump to: