7870 does around 500mh/s .. have not tested it on scrypt but should do 450-500kh/s Im guessing. Ya can find out from other 7870xt threads =)
The CPU.. Im not sure will have to find out for ya. Im pretty sure its a phenom II based X3..
Topic: WTS: Various GPU's & mining components... - page 2. (Read 3225 times)
What is the hashrate of the 7870?
Also what is the CPU on here: 890FXA-GD70 mobo w/ triple core CPU
Thanks!
Also what is the CPU on here: 890FXA-GD70 mobo w/ triple core CPU
Thanks!
Card received and works great! The only problem is the unfortunate location of my PCI-E 1x slot... gotta go get at least one more riser, but am just going to get two more and get better air flow between them!
Thanks! Positive feedback left!
Edit: Nevermind, it wouldn't let me leave feedback
Thanks! Positive feedback left!
Edit: Nevermind, it wouldn't let me leave feedback
aww bummer, but glad it works good for ya =)
btw, BUMP!
Card received and works great! The only problem is the unfortunate location of my PCI-E 1x slot... gotta go get at least one more riser, but am just going to get two more and get better air flow between them!
Thanks! Positive feedback left!
Edit: Nevermind, it wouldn't let me leave feedback
Thanks! Positive feedback left!
Edit: Nevermind, it wouldn't let me leave feedback
Product arrived today! Can't wait to get home and get it all hooked up
Thanks!
Thanks!
If you still have it in a few weeks I will probably do that
Gotta get a few other things in order before I need another GPU though...
Gotta get a few other things in order before I need another GPU though...
how bout 1.5btc for the 6950? =)
I'll do 1 BTC for the 6950 
Looks like my package will be here on Thursday!
Looks like my package will be here on Thursday!
bit too low , but will keep in mind =)
Or 0.85 BTC for the 6950
1.25 BTC for the 7870
Yes, the 5970's are not scrypt worthy unless you only mine on the good GPU =P
I dont know the exact issue w/ the RAM, either the VRM is screwed for one of the RAM buffers, or the chips are bad or its a cold solder issue.
I suspect either VRM issue for RAM or cold solder, highly doubt the chips themselves are bad.
I dont know the exact issue w/ the RAM, either the VRM is screwed for one of the RAM buffers, or the chips are bad or its a cold solder issue.
I suspect either VRM issue for RAM or cold solder, highly doubt the chips themselves are bad.
I don't mind needing to restart things I check on my miners frequently so thats ok. And 700 Mh/s is what I wanted to hear However I am currently looking for old, high end gpus for LTC mining. That is much more memory intensive than bitcoin mining so bad ram on the card could be an issue...
When you say bad ram do you mean dead ram chips that aren't even recognized or that its just flaky and fails sometimes?
However I am currently looking for old, high end gpus for LTC mining. That is much more memory intensive than bitcoin mining so bad ram on the card could be an issue...When you say bad ram do you mean dead ram chips that aren't even recognized or that its just flaky and fails sometimes?
They both get decent hashrate, IIRC, I ran them @ 1v, 750mhz , 760mhz or so...
Yielded close to 680-700mh/s per card.
The issue I had w/ them is one of them .. one of the GPU's , the RAM bus or buffer or controller or w/e is bad. So, some HW errors creep up over time...but hashes.
The other 5970 has kinda the same problem but behaves differently. Upon starting cgminer, it will mine for a few minutes then the GPU w/ the bad RAM will flag dead in cgminer, but after restarting that particular GPU's threads...it mines for days fine w/o the issue returning until next cgminer restart.
I used a watchdog script in windows to monitor this behaviour and restart the GPU accordingly.
Yielded close to 680-700mh/s per card.
The issue I had w/ them is one of them .. one of the GPU's , the RAM bus or buffer or controller or w/e is bad. So, some HW errors creep up over time...but hashes.
The other 5970 has kinda the same problem but behaves differently. Upon starting cgminer, it will mine for a few minutes then the GPU w/ the bad RAM will flag dead in cgminer, but after restarting that particular GPU's threads...it mines for days fine w/o the issue returning until next cgminer restart.
I used a watchdog script in windows to monitor this behaviour and restart the GPU accordingly.
What kind of hash rates do the 5970s get? I don't care about booting and displaying, just hashing
1x 5970 - 1BTC - same as listed above, behaves different when mining but has defective GPU, but can still mine.
1x 7870xt - 1.5BTC - Card was purchased new around a couple months ago, works completely fine mining / 3d.
1x 6950 ASUS 1GB - 1.25BTC - card never used for mining, was my gaming card for a year or so - works great, may still have box somewhere too..
---
Various sticks of DDR3 RAM - contact or post for further details
Various combinations of molex/sata -> PCIe adapters - .06BTC
---
Prices include shipping to CONUSA, Prices are OBO, Prices can change depending on BTC value, please PM or post w/ offers & questions =)
Thanks
Jump to: