[X13][ANN] [SHC2] [SHERLOCKCOIN V2-ONLY 221 COINS] POW/POS Hybrid UPDATE ASAP! - page 3.

leptar

member

Activity: 91

Merit: 10

yup, would also like to swap out V1 coins for V2.

endoffiat

full member

Activity: 203

Merit: 100

hi there SoopY, not sure how to swap v1 coins for v2. i have 0.11796988 Grin

coins with another 0.0006188 immature. my wallet doesn't sync so i am unable to send coins. Undecided

please help thanks.

offthewall

newbie

Activity: 4

Merit: 0

Quote from: soopy452000 on June 11, 2014, 02:47:55 AM

Quote from: orgi666 on June 11, 2014, 02:43:40 AM

Really?Nothing?

I have asked a few exchanges and also Bittrex where SHC was trading earlier , I think by next week we should be listed somewhere.

Good news,I waiting so long time.

orgi666

sr. member

Activity: 280

Merit: 250

Quote from: soopy452000 on June 11, 2014, 02:47:55 AM

Quote from: orgi666 on June 11, 2014, 02:43:40 AM

Really?Nothing?

I have asked a few exchanges and also Bittrex where SHC was trading earlier , I think by next week we should be listed somewhere.

Good news mate

I like good news...

kyndik

newbie

Activity: 54

Merit: 0

So what about swapping SHCv1 to SHCv2?

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: orgi666 on June 11, 2014, 02:43:40 AM

Really?Nothing?

I have asked a few exchanges and also Bittrex where SHC was trading earlier , I think by next week we should be listed somewhere.

orgi666

sr. member

Activity: 280

Merit: 250

Really?Nothing?

orgi666

sr. member

Activity: 280

Merit: 250

Any news about exchange?

orgi666

sr. member

Activity: 280

Merit: 250

Just one stupid question,by this difficulty,is it possible,that i fork because my rig is too powerfull comparing the rest?

gnawl

newbie

Activity: 23

Merit: 0

Took a bunch of tries today but it seems I'm finally synced to the proper chain.

Just to make sure, what block are we sitting at now? I'm showing 18793.

Thanks.

orgi666

sr. member

Activity: 280

Merit: 250

Good job mate,syncing again

gnawl

newbie

Activity: 23

Merit: 0

Block 10593 gets accepted then things seem to go bad.

Quote

SetBestChain: new best=0000000d3f75f44ac391 height=10593 trust=26093506254003 blocktrust=67406659 date=06/06/14 00:36:21
ProcessBlock: ACCEPTED
connection timeout
trying connection 90.157.19.238:44773 lastseen=13.9hrs
connection timeout
accepted connection 211.142.17.3:46678
trying connection 58.8.150.68:44773 lastseen=16.8hrs
send version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=211.142.17.3:46678, peer=211.142.17.3:46678
Added time data, samples 5, offset +1 (+0 minutes)
nTimeOffset = -5 (+0 minutes)
receive version message: version 60013, blocks=15645, us=68.148.28.13:44773, them=[2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773, peer=211.142.17.3:46678
connection timeout
trying connection 98.126.57.27:44773 lastseen=129.2hrs
Added 1 addresses from 211.142.17.3: 3 tried, 47 new
connection timeout
received block 0000001925fc2fe4e370
Misbehaving: 211.142.17.3:46678 (0 -> 100) DISCONNECTING
disconnecting node 211.142.17.3:46678
ERROR: ProcessBlock() : block with too little proof-of-work
trying connection 123.49.14.175:44773 lastseen=5.3hrs
accepted connection 202.198.62.133:36440
connection timeout
trying connection 123.49.14.175:44773 lastseen=5.3hrs
send version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=202.198.62.133:36440, peer=202.198.62.133:36440
Added time data, samples 6, offset -32 (+0 minutes)
Added 202.198.62.133:44773 from 202.198.62.133: 3 tried, 48 new
Moving 202.198.62.133:44773 to tried
receive version message: version 60013, blocks=5441, us=68.148.28.13:44773, them=202.198.62.133:44773, peer=202.198.62.133:36440
accepted connection 144.76.238.2:52232
connection timeout
accepted connection 80.60.62.143:55539
trying connection 103.247.51.23:44773 lastseen=149.1hrs
send version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=144.76.238.2:52232, peer=144.76.238.2:52232
Added time data, samples 7, offset -3 (+0 minutes)
nTimeOffset = -5 (+0 minutes)
Added 144.76.238.2:44773 from 144.76.238.2: 4 tried, 48 new
Moving 144.76.238.2:44773 to tried
receive version message: version 60013, blocks=15646, us=68.148.28.13:44773, them=144.76.238.2:44773, peer=144.76.238.2:52232
send version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=80.60.62.143:55539, peer=80.60.62.143:55539
Added time data, samples 8, offset -5 (+0 minutes)
Added 80.60.62.143:44773 from 80.60.62.143: 5 tried, 48 new
Moving 80.60.62.143:44773 to tried
receive version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=80.60.62.143:44773, peer=80.60.62.143:55539
connection timeout
trying connection 14.167.59.251:44773 lastseen=83.5hrs
connection from 37.128.134.77:57460 dropped (banned)
connection timeout
trying connection 123.49.14.175:44773 lastseen=5.3hrs
connection timeout
trying connection [2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773 lastseen=2.0hrs
connected [2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773
send version message: version 60013, blocks=10593, us=68.148.28.13:44773, them=[2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773, peer=[2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773
Added time data, samples 9, offset +4 (+0 minutes)
nTimeOffset = -5 (+0 minutes)
Moving [2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773 to tried
receive version message: version 60013, blocks=15646, us=[2001:0:5ef5:79fb:844:12db:bb6b:e3f2]:65105, them=[2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773, peer=[2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773
trying connection 123.49.14.175:44773 lastseen=5.3hrs
Added 36 addresses from 2001:0:9d38:6abd:3896:da61:2c71:eefc: 7 tried, 82 new
received block 0000002ae440bb0ea00f
Misbehaving: [2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773 (0 -> 100) DISCONNECTING
disconnecting node [2001:0:9d38:6abd:3896:da61:2c71:eefc]:44773
ERROR: ProcessBlock() : block with too little proof-of-work
connection timeout

orgi666

sr. member

Activity: 280

Merit: 250

i have tried to post the debug.log,but its too long,if you want i can sent it into your e-mail....

orgi666

sr. member

Activity: 280

Merit: 250

Quote from: soopy452000 on June 07, 2014, 03:45:13 PM

Quote from: orgi666 on June 07, 2014, 03:42:35 PM

Quote from: soopy452000 on June 07, 2014, 02:59:35 PM

Quote from: orgi666 on June 07, 2014, 02:40:10 PM

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

Can you backup your %APPDATA%SherlockCoinV2 and clear your existing one and redownload the blockchain and tell me?

If it doesnt work I will look further into the problem.

I did it milion times already....i wouldnt post,if it wasnt serious....

I see hmm I'm looking at the node here it looks all good and I'm running a wallet too , looks good too. Can you check your firewall or it's blocking the ports?

Mind posting here your debug.log from %APPDATA%SherlockCoinV2 ?

Warm Regards,
~SoopY~

My firewall is okay,i did check it to be sure,but if it would block ports,i wouldnt get any block,if i understand it well.

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: orgi666 on June 07, 2014, 03:42:35 PM

Quote from: soopy452000 on June 07, 2014, 02:59:35 PM

Quote from: orgi666 on June 07, 2014, 02:40:10 PM

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

Can you backup your %APPDATA%SherlockCoinV2 and clear your existing one and redownload the blockchain and tell me?

If it doesnt work I will look further into the problem.

I did it milion times already....i wouldnt post,if it wasnt serious....

I see hmm I'm looking at the node here it looks all good and I'm running a wallet too , looks good too. Can you check your firewall or it's blocking the ports?

Mind posting here your debug.log from %APPDATA%SherlockCoinV2 ?

Warm Regards,
~SoopY~

orgi666

sr. member

Activity: 280

Merit: 250

Quote from: soopy452000 on June 07, 2014, 02:59:35 PM

Quote from: orgi666 on June 07, 2014, 02:40:10 PM

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

Can you backup your %APPDATA%SherlockCoinV2 and clear your existing one and redownload the blockchain and tell me?

If it doesnt work I will look further into the problem.

I did it milion times already....i wouldnt post,if it wasnt serious....

gnawl

newbie

Activity: 23

Merit: 0

Quote from: soopy452000 on June 07, 2014, 02:59:35 PM

Quote from: orgi666 on June 07, 2014, 02:40:10 PM

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

Can you backup your %APPDATA%SherlockCoinV2 and clear your existing one and redownload the blockchain and tell me?

If it doesnt work I will look further into the problem.

Having the same problem. Just finished wiping everything a second time and it's still stuck. I see the coins I ended up mining at the .003 difficulty the other day when the wallet synced to the wrong chain. Tongue

One of the peers is running the old wallet.

{
"addr" : "202.198.62.133:36419",
"services" : "00000001",
"lastsend" : 1402168335,
"lastrecv" : 1402168335,
"conntime" : 1402168334,
"version" : 60013,
"subver" : "/SherlockCoinV2:1.0.0/",
"inbound" : true,
"startingheight" : 5441,
"banscore" : 0

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: orgi666 on June 07, 2014, 02:40:10 PM

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

Can you backup your %APPDATA%SherlockCoinV2 and clear your existing one and redownload the blockchain and tell me?

If it doesnt work I will look further into the problem.

orgi666

sr. member

Activity: 280

Merit: 250

Quote from: IanFoxley on June 07, 2014, 11:02:42 AM

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Yes,i use only that one,it stops at block nr. 10539 and doesnt go further....

IanFoxley

legendary

Activity: 910

Merit: 1000

Are you using this in your conf file?

addnode=sherlockcoinv2.no-ip.biz

I am getting a connection no problem.

Topic: [X13][ANN] [SHC2] [SHERLOCKCOIN V2-ONLY 221 COINS] POW/POS Hybrid UPDATE ASAP! - page 3. (Read 22243 times)