Topic: [XF] FileBit + ANON + No Premine + Innovative XF OpenShare () - page 5. (Read 14015 times)
lol.. over 1000% round on the pool
We have included all 10 charity addresses in our stratum code, we had to rewrite the stratum for this. Other pool op - make sure that you are sending 7.49 coins per charity address, otherwise the blocks will be rejected.
I don't understand. Per each 10 addreses or what?
It has the foundation wallet 10 coins go to it from each minted block. But it maybe sending more then 10 I don't know. Is it only sending 10 per block dev?
OK, i think i fix it at last ...
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
Seems to be.
I don't understand. Per each 10 addreses or what?
I connected around block 64 , but cant get any of them. I was using port and nodes form the wallet , where I'm mistaking ? 
Long ping. Hashrate?
My hashtate is abbout 10Mh/s , and there was 2 orphans only.
When I start the wallet first , I checked the nodes and port with "getpeerinfo" , copied them info conf file , saved , restart the wallet , filled the port into my bat file and nothing.
What I'm missing ?
hashingpower
Yeah this is one side of the coin , but I think Shadow_runner is mining with single GPU , and when the difficulty is below 0.1 ... it doesn't any mater the speed. Am i right ?
OK, i think i fix it at last ...
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
don't mine this shitcoin... more than 8% go to the "dev"
8.6% premine....？ I am out 
0.8% per 10 address block fee for bounties as stated in first post. No premine, no ipo, no hidden blocks
developer ur donation address is set wrongly ? It should be 0.8% but right now it's 8% ?
Current block reward is 861.27 which is 8% of original block ?
8.6% premine....？ I am out
0.8% per 10 address block fee for bounties as stated in first post. No premine, no ipo, no hidden blocks
OK, i think i fix it at last ...
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
FileBitd getinfo
{
"version" : "v2.0.0.0",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 124,
"timeoffset" : -28,
"moneysupply" : 116085.08000000,
"connections" : 19,
"proxy" : "",
"ip" : "88.213.221.77",
"difficulty" : {
"proof-of-work" : 14.75550067,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1407270679,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
Is it OK ?
Interesting how so many coins all fail at the same point during launch...
Always seems to be source is late, not uploaded and compiled in time for launch
How hard is it to distribute a file - in this case a 'filesharing-based' coin cant share it's own wallet in time?
- why not try putting a password on the file, then only release the password at launch...
c'mon people...really.
Always seems to be source is late, not uploaded and compiled in time for launch
How hard is it to distribute a file - in this case a 'filesharing-based' coin cant share it's own wallet in time?
- why not try putting a password on the file, then only release the password at launch...
c'mon people...really.
8.6% premine....？ I am out
this coin is not on c-cex
C-Cex is adding FBIT tomorrow
HOW DO I SOLO MINE THIS
I connected around block 64 , but cant get any of them. I was using port and nodes form the wallet , where I'm mistaking ?
Long ping. Hashrate?
My hashtate is abbout 10Mh/s , and there was 2 orphans only.
When I start the wallet first , I checked the nodes and port with "getpeerinfo" , copied them info conf file , saved , restart the wallet , filled the port into my bat file and nothing.
What I'm missing ?
hashingpower
SCAM ALERT
= 8% PREMINE
Quote
PoW block reward: 936.17 FBIT
= 8% PREMINE
for the love of god someone get a fucking pool up
I connected around block 64 , but cant get any of them. I was using port and nodes form the wallet , where I'm mistaking ?
Long ping. Hashrate?
My hashtate is abbout 10Mh/s , and there was 2 orphans only.
When I start the wallet first , I checked the nodes and port with "getpeerinfo" , copied them info conf file , saved , restart the wallet , filled the port into my bat file and nothing.
What I'm missing ?
And error ofc ...
Just perfect
Code:
/usr/local/src/wallets/Filebit/src/txdb-leveldb.h:37: undefined reference to `leveldb::WriteBatch::~WriteBatch()'
/usr/local/src/wallets/Filebit/src/txdb-leveldb.h:37: undefined reference to `leveldb::WriteBatch::~WriteBatch()'
collect2: error: ld returned 1 exit status
make: *** [FileBitd] Error 1
/usr/local/src/wallets/Filebit/src/txdb-leveldb.h:37: undefined reference to `leveldb::WriteBatch::~WriteBatch()'
collect2: error: ld returned 1 exit status
make: *** [FileBitd] Error 1
Just perfect
Filebit Source Temporary Mirror: Click Here!
Jump to: