XMR Stak miner 2.2.0 with colorscheme, inline shares + total hasrate, 0% dev fee - page 2.

Azrael777

newbie

Activity: 4

Merit: 0

Quote from: MagicSmoker on February 23, 2018, 07:33:56 AM

Quote from: Azrael777 on February 23, 2018, 01:35:08 AM

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

Look for the parameter in the main config file (config.txt by default) called:

"verbose_level" : 3,

and change the 3 to a 4. That will print out a hashrate report every 60 seconds.

I have done that, and the output is shown in the picture that I originally attached to my post.

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: Azrael777 on February 23, 2018, 01:35:08 AM

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

Look for the parameter in the main config file (config.txt by default) called:

"verbose_level" : 3,

and change the 3 to a 4. That will print out a hashrate report every 60 seconds.

Azrael777

newbie

Activity: 4

Merit: 0

Quote from: MagicSmoker on February 22, 2018, 09:33:39 AM

Quote from: Azrael777 on February 22, 2018, 09:25:50 AM

Quote from: Set Ready Go on February 22, 2018, 09:06:55 AM

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

@Set Ready go says he has an Nvidia GTX 750 Ti; his nvidia.txt configuration isn't going to be terribly useful for your AMD card...

The easiest thing to do is to run xmr-stak from the command line without any parameters and it will prompt you to enter currency type (either Monero for most Cryptonote coins, or AEON for AEON), pool address and your wallet address. It will then create cpu.txt and either amd.txt or nvidia.txt automatically. Once you have those you can then tweak them to improve performance.

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: Azrael777 on February 22, 2018, 09:25:50 AM

Quote from: Set Ready Go on February 22, 2018, 09:06:55 AM

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

@Set Ready go says he has an Nvidia GTX 750 Ti; his nvidia.txt configuration isn't going to be terribly useful for your AMD card...

The easiest thing to do is to run xmr-stak from the command line without any parameters and it will prompt you to enter currency type (either Monero for most Cryptonote coins, or AEON for AEON), pool address and your wallet address. It will then create cpu.txt and either amd.txt or nvidia.txt automatically. Once you have those you can then tweak them to improve performance.

Azrael777

newbie

Activity: 4

Merit: 0

Quote from: Set Ready Go on February 22, 2018, 09:06:55 AM

Quote from: Azrael777 on February 20, 2018, 02:48:07 AM

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???

https://s17.postimg.org/v7d43xcyn/2018-02-20_08-04-09.png

Thx

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

Set Ready Go

member

Activity: 273

Merit: 17

Quote from: Azrael777 on February 20, 2018, 02:48:07 AM

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???

Thx

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Azrael777

newbie

Activity: 4

Merit: 0

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???

https://s17.postimg.org/v7d43xcyn/2018-02-20_08-04-09.png

Thx

Set Ready Go

member

Activity: 273

Merit: 17

Quote from: Spill on February 14, 2018, 11:38:16 PM

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

You change the parameters in the start-electroneum.bat

if you are mining electroneum then its already set to not use your amd cards.

Code:

:start
timeout 45
xmr-stak -c electroneum.txt --noAMD
goto start

niobio-pool

newbie

Activity: 12

Merit: 0

Quote from: Spill on February 14, 2018, 11:38:16 PM

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

run like this:

xmr-stak --noNVIDIA --noAMD

Spill

jr. member

Activity: 94

Merit: 5

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

niobio-pool

newbie

Activity: 12

Merit: 0

If anyone wants to run xmr-stak without dev fee from Docker, here is how:

https://niobio-pool.com/dl/README.txt

- Docker (Linux or Mac OSX hosts)

# Linux
docker run -it --rm --device /dev/dri:/dev/dri -v $PWD:/cfg rig1/xmr-stak
# Mac OSX
docker run -it --rm -v $PWD:/cfg rig1/xmr-stak

See more about Docker at: https://hub.docker.com/r/rig1/xmr-stak/

- All versions available for download (Windows, Mac and Linux):

https://niobio-pool.com/dl/

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Set Ready Go on February 05, 2018, 03:15:15 PM

@rednoW
Uff 600+ Grin

Sweet man what thread config have you got on xmr stak ?
i use 1/3/4/5/7/9/10/11

My 8-thread config differs from yours but with your config I have the same 624h/s

Set Ready Go

member

Activity: 273

Merit: 17

Quote from: rednoW on February 05, 2018, 02:55:31 PM

Quote from: MagicSmoker on February 05, 2018, 01:20:26 PM

Quote from: Set Ready Go on February 05, 2018, 01:03:52 PM

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

ryzen 5 1600 can do even better

@rednoW
Uff 600+ Grin

Sweet man what thread config have you got on xmr stak ?
i use 1/3/4/5/7/9/10/11

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: rednoW on February 05, 2018, 02:55:31 PM

ryzen 5 1600 can do even better

That's what I have! Me and @Set Ready Go exchanged several PMs about tweaks to the CPU.txt file and without his help I would still be hashing away at 360-380 H/s!

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: MagicSmoker on February 05, 2018, 01:20:26 PM

Quote from: Set Ready Go on February 05, 2018, 01:03:52 PM

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

ryzen 5 1600 can do even better

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: Set Ready Go on February 05, 2018, 01:03:52 PM

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

Set Ready Go

member

Activity: 273

Merit: 17

Hers screenshot how it looks for me.

poNgz0r

copper member

Activity: 97

Merit: 0

Quote from: Set Ready Go on January 31, 2018, 03:23:53 PM

So i have been running this for a few days on a ryzen 5 1600 hovering about 490-510 H/s , seems rock solid.
Mining ETH on the rx 480.

Cool! Glad to hear that. Im planning on a slightly extra feature. Personally i use the web output a lot http://77.160.234.222:16000/h
The things that bothers me is that i cant find my wallet address in here so im planning on adding the wallet address in web output. Sometimes i want to double check my coins on the pool and i don't have always my wallet address at hand so therefor i want it to show up in the web output.

poNgz0r

copper member

Activity: 97

Merit: 0

Quote from: MagicSmoker on January 31, 2018, 02:24:12 PM

Quote from: poNgz0r on January 19, 2018, 05:11:02 AM

Update 20-01-18
Due to a bug in Visual Studio CUDA (Nvidia) didn't work. I recompiled and nvidia cards should be working now

Testing this out on a couple different computers and I really like the color scheme. So far it works fine in CPU-only mode with a Ryzen 5 1600 (440 H/s) and an FX-8300 (340 H/s), but GPU performance is rather lackluster with an RX 570 (getting about 550 H/s from the GPU itself, while Claymore v3.9 gets 720 H/s), and it doesn't work at all with a GTX 1080.

True. You need to do some optimisation in amd.txt. Increase the intensity. For 4GB cards i use something like 1536 as value. The nvidia part was a problem indeed. I forgot to compile the first time with nvidia enabled i only compiled with amd option only. If you download the new .exe file from here: https://drive.google.com/drive/folders/14r_lQUyY-CosDvuMAGOyUZV88TIj7e2w you should be fine, let me know.

poNgz0r

copper member

Activity: 97

Merit: 0

Quote from: Duykhang on January 30, 2018, 03:21:33 PM

Is the precompiled miner already compiled with 0% dev fee?

Yes it is

Topic: XMR Stak miner 2.2.0 with colorscheme, inline shares + total hasrate, 0% dev fee - page 2. (Read 2330 times)