Pages:
Author

Topic: [XPM] BFGMiner Prime Branch - page 3. (Read 16122 times)

sr. member
Activity: 389
Merit: 250
July 13, 2013, 10:47:14 PM
#42
did you build with ./confgure  --enable-cpumining ?


the command to run it on windows would be this but it just crashes for me on win 8 here

bfgminer.exe -a prime -S noauto -S cpu:auto -o localhost:9912 -u username -p password --coinbase-addr {primecoin wallet addr} --debuglog 2>prime.log

Yes, I built it with ./configure --enable-cpumining.
Made some progress with your command line though, I was trying port 8332.

Now I am getting invalid coinbase address though, it doesn't seem to like mine Sad.  The wallet address is the receiving address, right?

I got this error and then I realized I had deleted and re-pulled the source and had not gone back in and made the edits to base58.c in the OP.  Recompiling with that code copied in and hopefully that will resolve...

EDIT:  no, that wasn't it.  I'm still getting the invalid coinbase addr error.
member
Activity: 64
Merit: 10
July 13, 2013, 06:12:06 PM
#41
Any help, can't compile properly


configure: error: Could not find HASH_ITER - please install uthash-dev 1.9.2+     Angry


apt-get install uthash-dev update
Reading package lists... Done
Building dependency tree
Reading state information... Done
uthash-dev is already the newest version.

1.8.2 version

How to get version 1.9.2+ if it says is already the newest version.   Sad


newbie
Activity: 7
Merit: 0
July 13, 2013, 05:57:44 PM
#40
Is anyone else finding that the block number in bfgminer is consistently lagging behind the current primecoind block?

Maybe it updates less often. I see it halted at some point, then it updates and it's in sync again. Just now it actually jumped one block "in front" of the daemon so it seems as if primecoind lagged 1 block.
full member
Activity: 217
Merit: 100
July 13, 2013, 05:50:32 PM
#39
Is anyone else finding that the block number in bfgminer is consistently lagging behind the current primecoind block?
hero member
Activity: 721
Merit: 523
July 13, 2013, 05:38:34 PM
#38
would love to hear from anyone who has it working on win 8 x64
legendary
Activity: 1792
Merit: 1008
/dev/null
July 13, 2013, 05:35:24 PM
#37
Any confirmations of mined blocks yet?

Working sources/compiles?

Going to keep looking out for this.
It did return blocks on testnet when I tried it, but out of the 20 odd accepted and 50 odd rejected only 8 blocks showed up as immature and 3 orphans.
set --expiry 1 should fix this problem!
hero member
Activity: 602
Merit: 500
July 13, 2013, 12:09:04 PM
#36
Can --coinbase-addr be any address you own (like in a main wallet) or does it have to be from the local primecoind accounts?

It can be any address. You don't have to own it either. Feel free to use AWoLFSojTZoPwqbCwwNqryQdmedD14NGYy

I am pretty sure you have to use an address that is in the daemon wallet your are solo mining to.. Atleast on current available code.

Else it will not show up in transaction logs.
legendary
Activity: 2674
Merit: 2965
Terminated.
July 13, 2013, 11:41:11 AM
#35
Hopefully you can get this to work, I'd help but too busy at the time.
Keep up the great work  Cool
legendary
Activity: 1094
Merit: 1006
July 13, 2013, 09:29:15 AM
#34
Any confirmations of mined blocks yet?

Working sources/compiles?

Going to keep looking out for this.
It did return blocks on testnet when I tried it, but out of the 20 odd accepted and 50 odd rejected only 8 blocks showed up as immature and 3 orphans.
Well that is promising at least.
sr. member
Activity: 280
Merit: 250
July 13, 2013, 07:07:19 AM
#33
Any confirmations of mined blocks yet?

Working sources/compiles?

Going to keep looking out for this.
It did return blocks on testnet when I tried it, but out of the 20 odd accepted and 50 odd rejected only 8 blocks showed up as immature and 3 orphans.
member
Activity: 72
Merit: 10
July 13, 2013, 06:57:41 AM
#32
I now trying ... 8x300 pps (Intel Xeon E3 1245v2 3.8GHz)
one hour and nothing :/
sr. member
Activity: 350
Merit: 250
July 13, 2013, 06:32:35 AM
#31
Any confirmations of mined blocks yet?

Working sources/compiles?

Going to keep looking out for this.
member
Activity: 112
Merit: 10
Independent Analyst
July 13, 2013, 05:25:45 AM
#30
bookmarking
hero member
Activity: 721
Merit: 523
July 13, 2013, 05:21:27 AM
#29
yep looks like my windows 8 log ->>http://pastebin.com/8X17SkFD

garbled bit looks a bit strange
full member
Activity: 224
Merit: 100
July 13, 2013, 05:15:32 AM
#28
Oh and for those of you struggling with the error gmp.h not found on windows minGW, install it with this line of code:

mingw-get install mingw32-gmp
hero member
Activity: 756
Merit: 501
July 13, 2013, 05:14:50 AM
#27
Let it run overnight on an old i7 on linux, got one rejected block.
full member
Activity: 224
Merit: 100
July 13, 2013, 05:11:17 AM
#26
Quote
need to run autogen.sh before that file will show up

Hm...

Making progress but still crashed, here is the log.  Error said no suitable long poll found though.

Quote
[2013-07-13 04:10:14] setrlimit: Not supported by platform
 [2013-07-13 04:10:14] Started bfgminer 3.1.2
 [2013-07-13 04:10:14] GeneratePrimeTable() : prime table [1, 1000000] generated with 78498 primes
 [2013-07-13 04:10:14] CPU 0 : Set temperature config: target=89 cutoff=95
 [2013-07-13 04:10:14] CPU 1 : Set temperature config: target=89 cutoff=95
 [2013-07-13 04:10:14] CPU 2 : Set temperature config: target=89 cutoff=95
 [2013-07-13 04:10:14] CPU 3 : Set temperature config: target=89 cutoff=95
 [2013-07-13 04:10:14] Probing for an alive pool
 [2013-07-13 04:10:14] Popping work to stage thread
 [2013-07-13 04:10:14] Testing pool http://localhost:9912
 [2013-07-13 04:10:14] Calculating midstate locally
 [2013-07-13 04:10:14] Learned that block id 9de445a1 is height 27819
 [2013-07-13 04:10:14] Successfully retrieved and deciphered work from pool 0 http://localhost:9912
 [2013-07-13 04:10:14] Pushing pooltest work to base pool
 [2013-07-13 04:10:14] Selected getblocktemplate protocol for pool 0
 [2013-07-13 04:10:14] Network difficulty changed to 0 (  inf?h/s)
 [2013-07-13 04:10:14] Pool 0 http://localhost:9912 alive
 [2013-07-13 04:10:14] New block: ...9de445a1 # 27819 diff 0 (  inf?h/s)
 [2013-07-13 04:10:14] No suitable long-poll found for http://localhost:9912
 [2013-07-13 04:10:14] Pushing work to getwork queue (queued=N)
 [2013-07-13 04:10:14] Popping work to stage thread
 [2013-07-13 04:10:15] Waking up thread 0
 [2013-07-13 04:10:15] Waking up thread 1
 [2013-07-13 04:10:15] Waking up thread 2
 [2013-07-13 04:10:15] Waking up thread 3
 [2013-07-13 04:10:15] Popping ping in miner thread
 [2013-07-13 04:10:15] 0 gpu miner threads started
 [2013-07-13 04:10:15] Popping ping in miner thread
 [2013-07-13 04:10:15]  [2013-CPU 007-13 04:10:15]: Popping work Po fropping ping in miner thread
 [2m get queu01e3-07-1 to get work [20133-07-13 04 04:1:10:150:
 [215] 01Popping]  piCPU 2: Po3-07-13 0pping work from get q4:10:15] ngCPU 1: P in  [miner thread
2opping wor013-07-13 04:10:15] ueue k from get queue to get work
Sto geuccessfully rolled t work
 [2013-07-1 [2013-03ext 04:10:15] 7-4 1ranonce to 3 04:10:15]cpu  dataminer threads starteCPU 3: Popping d, using SHA256 'prwork frid 1ime' algorithm.
om get queue to get work

 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 2
 [2013-07-13 04:10:15] Pushing cloned available work to stage thread
 [2013-07-13 04:10:15] Pushing work from pool 0 to hash queue
 [2013-07-13 04:10:15] CPU 0: Got work from get queue to get work for thread 0
 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 3
 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 4
 [2013-07-13 04:10:15] Pushing cloned available work to stage thread
 [2013-07-13 04:10:15] Pushing work from pool 0 to hash queue
 [2013-07-13 04:10:15] CPU 1: Got work from get queue to get work for thread 1
 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 5
 [2013-07-13 04:10:15] Generated work from latest GBT job in get_work_thread with 32766 seconds left
 [2013-07-13 04:10:15] Pushing work from pool 0 to hash queue
 [2013-07-13 04:10:15] Creating extra submit work thread
 [2013-07-13 04:10:15] CPU 3: Got work from get queue to get work for thread 3
 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 6
 [2013-07-13 04:10:15] Generated work from latest GBT job in get_work_thread with 32766 seconds left
 [2013-07-13 04:10:15] Pushing work from pool 0 to hash queue
 [2013-07-13 04:10:15] CPU 2: Got work from get queue to get work for thread 2
 [2013-07-13 04:10:15] Successfully rolled extranonce to dataid 7
 [2013-07-13 04:10:15] Generated work from latest GBT job in get_work_thread with 32766 seconds left
 [2013-07-13 04:10:15] Pushing work from pool 0 to hash queue
hero member
Activity: 721
Merit: 523
July 13, 2013, 04:48:33 AM
#25
did you make the edit linked to pastebin in the first post?

make this change >> http://pastebin.com/XSTTRNF9 << src/libblkmaker/base58.c around line 120

This allows you to use your primecoin wallet address instead of having to convert that to a btc wallet address.


need to run autogen.sh before that file will show up
full member
Activity: 224
Merit: 100
July 13, 2013, 04:42:28 AM
#24
did you build with ./confgure  --enable-cpumining ?


the command to run it on windows would be this but it just crashes for me on win 8 here

bfgminer.exe -a prime -S noauto -S cpu:auto -o localhost:9912 -u username -p password --coinbase-addr {primecoin wallet addr} --debuglog 2>prime.log

Yes, I built it with ./configure --enable-cpumining.
Made some progress with your command line though, I was trying port 8332.

Now I am getting invalid coinbase address though, it doesn't seem to like mine Sad.  The wallet address is the receiving address, right?
hero member
Activity: 721
Merit: 523
July 13, 2013, 04:41:28 AM
#23
did you build with ./confgure  --enable-cpumining ?


the command to run it on windows would be this but it just crashes for me on win 8 here

bfgminer.exe -a prime -S noauto -S cpu:auto -o localhost:9912 -u username -p password --coinbase-addr {primecoin wallet addr} --debuglog 2>prime.log
Pages:
Jump to: