Ok,
So i opened the box today and they are missing the power cables, and the little wifi aerial thingy that sticks out the back end of the rig. Need to pop out now and see if i can pick a cable up quickly to make sure the unit itself actually works.
I only bought two and the other i shipped out ASAP to a friend so can't confirm if this is the case for everyone or not. It is possible that the cables and wifi aerials were in the second box? You don't actually need the wifi aerial, it should still be able to pick up signal...there is just a little gold screw where you could fix one onto the rig.
Other people confirm if these things are missing as you get yours in too please... WIFI AERIAL + POWER CABLE
Dimensions of box
20 in x 14 in x 17 in
Actual weight of 1 box
11.2 kg
Dimensions of rig
16 x 9 x 6
Packaging was good with double ply boxes used. and lots of padding. The units themselves are black and have an industrial look and feel. A lot heavier than the Butterfly lab 60 gh units. I hear these Avalon ones can be overclocked to 85 gh/s so i am going to do that tonight.
No instructions or manual included in the box....
Instructions to use:
Connect your laptop to the eithernet port of the Avalon
Setup your laptop IP address 192.168.0.101
Open
http://192.168.0.100Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet
setup your mining worker: Status -> Cgminer Configuration.
Restart the cgminer service: System -> Startup,
Check your avalon status: Status -> Cgminer Status
Setup password/using ssh
https://en.bitcoin.it/wiki/Avalon#User_GuideStarting with batch #2, the WiFi antenna and the power cable are customer supplied items.
