Your rigs need your help | Bitcointalksearch.org

nc50lc

legendary

Activity: 2534

Merit: 6080

Self-proclaimed Genius

Quote from: joseph32 on April 20, 2019, 01:28:52 AM

Grabbing such an old thread Shocked

Right, ever since these "Veil-signatured" guys (not all of them) came here, Mining (Altcoin) board become a total mess (There's something fishy going around).
It's as problematic as YoBit's recruited bounty hunters.

I got no problem with Signature Campaigns as I am wearing one too, but the spamming to boost the post count is a different scenario.
I have asked a mod to lock this thread.

mak013

hero member

Activity: 2548

Merit: 769

Quote from: Christinebeauty on April 29, 2019, 08:42:40 AM

It is good to perform regular cleaning of your rig but you just have to take caution not to cause any mechanical damage to the machine. If you live close to a dusty load, frequent dusting is a necessity for maintaining your machine

Frequently, the next topic after cleaning is smth about "Help! My rigs shutted down and dont start".
If if works normally - dont touch. This is the main rule in IT.

Beyerd17

full member

Activity: 826

Merit: 103

Quote from: jony35490 on April 29, 2019, 11:32:13 AM

Quote from: Dzeronimo on August 24, 2018, 01:33:51 PM

Yes, cleaning can be dangerous. I used vacuum cleaner instead of compressed air and almost damaged fan blades. It's important to be careful and patient.

Yeah it’s very very important to be careful while doing anything. Cause if we become impatient and start doing anything quickly then we may face so many problems. So we need to clean it very closely.

If you are going to use a vacuum cleaner instead of compressed air, I would suggest you flip it to low power not to damage any components, best would be not to use a vacuum cleaner at all.

John46285

jr. member

Activity: 100

Merit: 1

Security and Privacy Features on the Blockchain

Quote from: FlamingFingers on August 22, 2018, 04:09:56 PM

If you were where I live, you would need to clean your rigs daily. My country is the fifth most polluted countries in the world according to WHO (World Health Organization), and dust existence is beyond measure. I clean my rig at least twice a week, and just 6 hours after I clean it, it collects dust. If I leave it for a week, my components become literally unrecognisable with dust covering every inch of them.
It gets frustrating, so don't blame me for getting lazy sometimes Roll Eyes

Yeah it’s must need to keep our rigs clean and fresh. Otherwise it may not work properly and we may get in touch with big problems.

jony35490

jr. member

Activity: 422

Merit: 9

Quote from: Dzeronimo on August 24, 2018, 01:33:51 PM

Yes, cleaning can be dangerous. I used vacuum cleaner instead of compressed air and almost damaged fan blades. It's important to be careful and patient.

Yeah it’s very very important to be careful while doing anything. Cause if we become impatient and start doing anything quickly then we may face so many problems. So we need to clean it very closely.

Christinebeauty

copper member

Activity: 420

Merit: 2

It is good to perform regular cleaning of your rig but you just have to take caution not to cause any mechanical damage to the machine. If you live close to a dusty load, frequent dusting is a necessity for maintaining your machine

marcous

hero member

Activity: 2478

Merit: 512

Leading Crypto Sports Betting & Casino Platform

Sounds trivial but this is something that is quite influential. All the things, we need to pay attention to. at least if it is clean it will get the ideal temperature. Thank you for being reminded, mate!

Keadyar

jr. member

Activity: 224

Merit: 2

Quote from: profitgenerator212 on April 27, 2019, 03:21:35 PM

Lol. Same problem here. Sub Saharan Africa. If you don't have problems with inconsistent supply of electricity, you will have dust problems. Such is the difficult mining tales we tell from this part of the world

you're right! Do not forget that the high temperature and dust are the main enemies of the miner. Therefore, unfortunately, many regions are not suitable for mining despite the inexpensive electricity.

profitgenerator212

sr. member

Activity: 714

Merit: 251

Quote from: deskless on August 22, 2018, 04:17:15 PM

Quote from: FlamingFingers on August 22, 2018, 04:09:56 PM

If you were where I live, you would need to clean your rigs daily. My country is the fifth most polluted countries in the world according to WHO (World Health Organization), and dust existence is beyond measure. I clean my rig at least twice a week, and just 6 hours after I clean it, it collects dust. If I leave it for a week, my components become literally unrecognisable with dust covering every inch of them.
It gets frustrating, so don't blame me for getting lazy sometimes Roll Eyes

are you serious dude ? I haven't done cleaning for over 6 months

Lol. Same problem here. Sub Saharan Africa. If you don't have problems with inconsistent supply of electricity, you will have dust problems. Such is the difficult mining tales we tell from this part of the world

adaseb

legendary

Activity: 3808

Merit: 1723

It really depends on the environment that your rigs are in. I used to live in an area beside a busy street and I had to basically clean the rigs every 2-3 months because there was tons of dust.

When I moved in a less busy area, I cleaned the rigs maybe once every 12 months or so.

Even when tons of dust comes out, it didn't really affect the temperature of the GPUs, I've always took the measurements before and after the cleaning. I think the temperatures are only affected if there is so much dust that it blocks the heat sink and air ways for the fan.

lifesgood10

member

Activity: 378

Merit: 13

Quote from: Dzeronimo on August 22, 2018, 01:25:36 PM

Yes, we all know this, but sometimes we forget a basic thing, so here is a friendly reminder - clean your rigs. Dust is your enemy

In the last few days it’s very hot in my city, so I thought that higher GPU temperature and fan speed on my rig are normal. But, noise from a CPU fan started annoying me and I decided to clean all fans.
At first, graphics card didn’t look very dirty. There was only a little dust on a cooler and I didn’t expect any significant improvement. Surprisingly, after cleaning GPU temperature went down over 6 degrees. Also, fan speed is 10% lower.
So, don’t be lazy, clean your rigs Wink

Wow, that’s a routine cleaning
In my country; there are more dusts, so I have a big blanket spread over the machines
And I still clean 4 times a month.

You also need to keep it cool by getting air conditions or air purifier

joseph32

member

Activity: 418

Merit: 21

Quote from: WannaCry on April 20, 2019, 01:18:21 AM

for things like this, not only your mining rigs, but as well your computers they need to be cleaned at least 2 a month, if you are using them everyday and 24/7 Grin

.. although they are machine but we need to take care them also..

Grabbing such an old thread Shocked

WannaCry

full member

Activity: 742

Merit: 101

for things like this, not only your mining rigs, but as well your computers they need to be cleaned at least 2 a month, if you are using them everyday and 24/7 Grin

.. although they are machine but we need to take care them also..

deskless

jr. member

Activity: 279

Merit: 1

Quote from: adaseb on August 23, 2018, 03:06:42 AM

Cleaning your rigs is dependant on what environment you are living in.

If you got the window open next to your rig and its close to a busy street then you might need to clean more often than someone who keeps their rigs in an air conditioned office which filters their air.

For most people you just need to clean it 6-12 months. Cleaning it 1-2 months is overkill and you will most likely end up damaging a fan blade with your pressure air than get better temps out of those GPUs.

How do I know if Thermal paste is needed to be applied ?

Dzeronimo

full member

Activity: 588

Merit: 103

Yes, cleaning can be dangerous. I used vacuum cleaner instead of compressed air and almost damaged fan blades. It's important to be careful and patient.

adaseb

legendary

Activity: 3808

Merit: 1723

Cleaning your rigs is dependant on what environment you are living in.

If you got the window open next to your rig and its close to a busy street then you might need to clean more often than someone who keeps their rigs in an air conditioned office which filters their air.

For most people you just need to clean it 6-12 months. Cleaning it 1-2 months is overkill and you will most likely end up damaging a fan blade with your pressure air than get better temps out of those GPUs.

whitesites

jr. member

Activity: 88

Merit: 7

Every couple months I just take my rigs out into my driveway and use an air compressor to blast out all the dust from the GPUs and power supplies. Always amazes me how much stuff comes out.
If you want to get really hardcore take your GPUs apart and reapply new thermal paste between the die and heat sink. Except use the good stuff this time.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: deskless on August 22, 2018, 04:31:42 PM

Quote from: vmozara on August 22, 2018, 04:26:45 PM

Quote from: deskless on August 22, 2018, 04:17:15 PM

are you serious dude ? I haven't done cleaning for over 6 months

https://bitcointalksearch.org/topic/m.42284358

Quote

All of a sudden mining stopped. Not sure whether the MB or CPU died. When I opened the rig I did see lot of dust. I plan to clean it this week and try running them again. Have any of you tried to call warranty on either the MB or CPU ?

Funny, this guy has same username like you

That's me only dude. It happened to me with one rig. I did not think that I need to clean GPUs.

you need to

imagine a GPU heatsink and fans full of dust, it can't cool your GPU's properly

feels like a baby suffocated, it may cause overheating

if it reach your temp threshold mining and system will stop

lunobird

full member

Activity: 846

Merit: 115

Quote from: FlamingFingers on August 22, 2018, 04:09:56 PM

If you were where I live, you would need to clean your rigs daily. My country is the fifth most polluted countries in the world according to WHO (World Health Organization), and dust existence is beyond measure. I clean my rig at least twice a week, and just 6 hours after I clean it, it collects dust. If I leave it for a week, my components become literally unrecognisable with dust covering every inch of them.
It gets frustrating, so don't blame me for getting lazy sometimes Roll Eyes

You need to move out. You should be worried about your lungs.

deskless

jr. member

Activity: 279

Merit: 1

Quote from: vmozara on August 22, 2018, 04:26:45 PM

Quote from: deskless on August 22, 2018, 04:17:15 PM

are you serious dude ? I haven't done cleaning for over 6 months

https://bitcointalksearch.org/topic/m.42284358

Quote

All of a sudden mining stopped. Not sure whether the MB or CPU died. When I opened the rig I did see lot of dust. I plan to clean it this week and try running them again. Have any of you tried to call warranty on either the MB or CPU ?

Funny, this guy has same username like you

That's me only dude. It happened to me with one rig. I did not think that I need to clean GPUs.

Topic: Your rigs need your help (Read 618 times)