Z9 Mini all batches 1-4 Unlocked with working temp, fan, Overclock NO Dev-Fee - page 3.

Kunolyb

newbie

Activity: 14

Merit: 0

Quote from: LiliVart on November 26, 2018, 03:07:33 PM

Quote from: Kunolyb on November 26, 2018, 03:00:37 PM

Quote from: LiliVart on November 26, 2018, 02:58:34 PM

Quote from: chipless on November 21, 2018, 12:16:11 PM

I have working Batch 4 firmware for the z9 Mini unlocked with working temp and fan for the Batch 4 units.

I am not asking for dev fee and only ask for donations if you find it helpful for your Batch 4 Z9 mini. This is a one time fix no further updates for this firmware Efudd has the furture updates covered with his projects.

I am only releasing this because the fan noise on the batch 4's sucks when using batch 1 firmware.

Donations Zcash only can be sent to: t1e4Dmr5RBgnWqTN2mAmZ6JzGavW7qxA4P1

THIS IS FOR Z9 Mini's ONLY WILL WORK ON ALL BATCHES 1-4

No Auto-Refresh:
https://drive.google.com/file/d/1fSrEopPWO5nChvphh7zvIT_3zj4DI4t5/view?usp=sharing

I am going to offer some updates but I don't believe they will be to the extent of Efudd's clocking and fan mods, mine will be mostly to
the web gui options and if possible the ability to change the HTTP port thru the web gui. This will make it possible to monitor remotely
thru a web browser when you have multiple units behind a router.

11/23/2018 3:48
Update: Added Auto-Refresh to the miner status page auto update status every 45 seconds

With Auto-Refresh
https://drive.google.com/file/d/1FioZnKLtVITpj9UfcDWlS1HnG5sVCvVV/view?usp=sharing

Hello, what is the password for the firmware? I can not go to the device

Ohh you too? Huh

yes...found a solution?

No! i´m still having massive problems, reset, ip reset and other reset dont work. I´m lost!

LiliVart

newbie

Activity: 8

Merit: 0

Quote from: Kunolyb on November 26, 2018, 03:00:37 PM

Quote from: LiliVart on November 26, 2018, 02:58:34 PM

Quote from: chipless on November 21, 2018, 12:16:11 PM

I have working Batch 4 firmware for the z9 Mini unlocked with working temp and fan for the Batch 4 units.

I am not asking for dev fee and only ask for donations if you find it helpful for your Batch 4 Z9 mini. This is a one time fix no further updates for this firmware Efudd has the furture updates covered with his projects.

I am only releasing this because the fan noise on the batch 4's sucks when using batch 1 firmware.

Donations Zcash only can be sent to: t1e4Dmr5RBgnWqTN2mAmZ6JzGavW7qxA4P1

THIS IS FOR Z9 Mini's ONLY WILL WORK ON ALL BATCHES 1-4

No Auto-Refresh:
https://drive.google.com/file/d/1fSrEopPWO5nChvphh7zvIT_3zj4DI4t5/view?usp=sharing

I am going to offer some updates but I don't believe they will be to the extent of Efudd's clocking and fan mods, mine will be mostly to
the web gui options and if possible the ability to change the HTTP port thru the web gui. This will make it possible to monitor remotely
thru a web browser when you have multiple units behind a router.

11/23/2018 3:48
Update: Added Auto-Refresh to the miner status page auto update status every 45 seconds

With Auto-Refresh
https://drive.google.com/file/d/1FioZnKLtVITpj9UfcDWlS1HnG5sVCvVV/view?usp=sharing

Hello, what is the password for the firmware? I can not go to the device

Ohh you too? Huh

yes...found a solution?

Kunolyb

newbie

Activity: 14

Merit: 0

Quote from: LiliVart on November 26, 2018, 02:58:34 PM

Quote from: chipless on November 21, 2018, 12:16:11 PM

I have working Batch 4 firmware for the z9 Mini unlocked with working temp and fan for the Batch 4 units.

I am not asking for dev fee and only ask for donations if you find it helpful for your Batch 4 Z9 mini. This is a one time fix no further updates for this firmware Efudd has the furture updates covered with his projects.

I am only releasing this because the fan noise on the batch 4's sucks when using batch 1 firmware.

Donations Zcash only can be sent to: t1e4Dmr5RBgnWqTN2mAmZ6JzGavW7qxA4P1

THIS IS FOR Z9 Mini's ONLY WILL WORK ON ALL BATCHES 1-4

No Auto-Refresh:
https://drive.google.com/file/d/1fSrEopPWO5nChvphh7zvIT_3zj4DI4t5/view?usp=sharing

I am going to offer some updates but I don't believe they will be to the extent of Efudd's clocking and fan mods, mine will be mostly to
the web gui options and if possible the ability to change the HTTP port thru the web gui. This will make it possible to monitor remotely
thru a web browser when you have multiple units behind a router.

11/23/2018 3:48
Update: Added Auto-Refresh to the miner status page auto update status every 45 seconds

With Auto-Refresh
https://drive.google.com/file/d/1FioZnKLtVITpj9UfcDWlS1HnG5sVCvVV/view?usp=sharing

Hello, what is the password for the firmware? I can not go to the device

Ohh you too? Huh

LiliVart

newbie

Activity: 8

Merit: 0

Quote from: chipless on November 21, 2018, 12:16:11 PM

I have working Batch 4 firmware for the z9 Mini unlocked with working temp and fan for the Batch 4 units.

I am not asking for dev fee and only ask for donations if you find it helpful for your Batch 4 Z9 mini. This is a one time fix no further updates for this firmware Efudd has the furture updates covered with his projects.

I am only releasing this because the fan noise on the batch 4's sucks when using batch 1 firmware.

Donations Zcash only can be sent to: t1e4Dmr5RBgnWqTN2mAmZ6JzGavW7qxA4P1

THIS IS FOR Z9 Mini's ONLY WILL WORK ON ALL BATCHES 1-4

No Auto-Refresh:
https://drive.google.com/file/d/1fSrEopPWO5nChvphh7zvIT_3zj4DI4t5/view?usp=sharing

I am going to offer some updates but I don't believe they will be to the extent of Efudd's clocking and fan mods, mine will be mostly to
the web gui options and if possible the ability to change the HTTP port thru the web gui. This will make it possible to monitor remotely
thru a web browser when you have multiple units behind a router.

11/23/2018 3:48
Update: Added Auto-Refresh to the miner status page auto update status every 45 seconds

With Auto-Refresh
https://drive.google.com/file/d/1FioZnKLtVITpj9UfcDWlS1HnG5sVCvVV/view?usp=sharing

Hello, what is the password for the firmware? I can not go to the device

Kunolyb

newbie

Activity: 14

Merit: 0

Not working at all.

Kunolyb

newbie

Activity: 14

Merit: 0

Quote from: chipless on November 26, 2018, 02:25:43 PM

Quote from: Kunolyb on November 26, 2018, 01:31:37 PM

hello

Downloaded your firmware for the z9 mini for all 5 mini´s and now i am unable to log on, the user and password are not working on any of them, have you had this problem before?

Kuno

ps i´m not even able to reset to factory...

The only time I have ever had a login issue was when I needed to close my browser and clear the browser temp files. The reset is power on the unit wait about 30 sec to a min then hold the reset button in until the fault and normal light flash ---about 10-20 seconds pressing the button.

Thanks man, will try that now.

chipless

jr. member

Activity: 559

Merit: 4

Quote from: Kunolyb on November 26, 2018, 01:31:37 PM

hello

Downloaded your firmware for the z9 mini for all 5 mini´s and now i am unable to log on, the user and password are not working on any of them, have you had this problem before?

Kuno

ps i´m not even able to reset to factory...

The only time I have ever had a login issue was when I needed to close my browser and clear the browser temp files. The reset is power on the unit wait about 30 sec to a min then hold the reset button in until the fault and normal light flash ---about 10-20 seconds pressing the button.

Kunolyb

newbie

Activity: 14

Merit: 0

hello

Downloaded your firmware for the z9 mini for all 5 mini´s and now i am unable to log on, the user and password are not working on any of them, have you had this problem before?

Kuno

ps i´m not even able to reset to factory...

chipless

jr. member

Activity: 559

Merit: 4

Quote from: Pizzi_h on November 22, 2018, 04:01:00 PM

With this fw is it possible to get above 657mhz and nit to loose one board?

You got the batch 4 to 737?
Regards

Depending on what batch you have depends on how high you can go. The batch 1's I have goto 762 the batch 2's goto 662 and the batch 3's and 4's goto 737..

So far it don't seem to matter what firmware those are the levels I have made it to with my machines. I have 1 hashboard on the batch 2 that gets 1 x but it never loses speed. So I don't don't if this is a reporting error if there is actually something going on as long as I don't lose speed I don't worry about 1 or 2 x's

If you wish to try Efudd's when it is available you can try to set each board separately when I tried it didn't help any for my units but others have had different results.

efudd

member

Activity: 504

Merit: 51

Quote from: Pizzi_h on November 22, 2018, 04:01:00 PM

With this fw is it possible to get above 657mhz and nit to loose one board?

You got the batch 4 to 737?
Regards

If you need to manage individual board frequencies, you’ll have to use mine. Losing boards will vary by machine, too. The only real way to answer your question on 657 is try....

Pizzi_h

newbie

Activity: 9

Merit: 0

With this fw is it possible to get above 657mhz and nit to loose one board?

You got the batch 4 to 737?
Regards

chipless

jr. member

Activity: 559

Merit: 4

Your welcome … If you can make a donation thank you if not I wont hold it against you

I only hope your home is quieter for the holiday season. Happy Mining!!

Antonio2018

newbie

Activity: 8

Merit: 0

Dear firmware developers!

Thank you for your work. This is firmware really work!!!! As soon as I can make a donation.

astraleureka

member

Activity: 236

Merit: 16

I don't have any Z9 minis or interest in this firmware, but I appreciate reading the back and forth here, wish more developers in this sphere had your good attitudes

chipless

jr. member

Activity: 559

Merit: 4

Quote from: efudd on November 21, 2018, 07:46:13 PM

Chipless,

Fair enough. I apologize. Stresses are clearly showing... how I have responded to you is not my goal, ever.

Jason

Apology accepted …..The stress of the fans on the batch 4s put me over this weekend and I shouldn't have responded the way I did. As I said before I am here to help you if I can in any way testing or trying to get past some bugs.

chipless

jr. member

Activity: 559

Merit: 4

Quote from: mikeywith on November 21, 2018, 07:25:03 PM

I have not downloaded your version, but gave you a merit for your work and for that fact that you giving it out for free. good luck

Thank you.... I just want us all to work together to get the most out of our miners without the manufacturer trying to screw us.

efudd

member

Activity: 504

Merit: 51

Chipless,

Fair enough. I apologize. Stresses are clearly showing... how I have responded to you is not my goal, ever.

Jason

mikeywith

legendary

Activity: 2394

Merit: 6581

be constructive or S.T.F.U

I have not downloaded your version, but gave you a merit for your work and for that fact that you giving it out for free. good luck

chipless

jr. member

Activity: 559

Merit: 4

Quote from: efudd on November 21, 2018, 06:45:44 PM

Smarty’s fix is incorrect. It causes miscalculations in other parts of the frequency handling around timeouts. This is why folk have issues with it in some circumstances.

I have zero miners other than two on loan so you clearly are off base.

The problem I had is that you posted it in my thread. Simple as that, not that you released a mod.

As far as “in it for money”, you are right I seek to have my time accounted for. As far as greed, you are simply wrong. One example is I have had a handful of users who purchased firmware and their machine could not handle an overclock; they were refunded. That is not greed.

Jason

You asked to start my own thread so I did and you come on it wanting to reverse engineer it, all you had to do was ask what I did and I would tell you like I did. As far as the fix not working on some units the same can be said about your release also it has bugs. I have been using various fixes on my miners and haven't had any issues with any firmware running. There will always be some units that run flaky no matter what fw is on it. I have no intention to rip your release apart as I said this was put out to help the batch 4 users with a fan issue when running batch 1 fw. You didn't have a problem with someone posting the stock fw on the thread but this one you did. It is always better to work together to overcome the manufacturers measures. Again didn't mean to offend you if you would have said something other then you weren't interested in the bacth 4 at this time I would have kept it to myself but you said you weren't interested in the units due to their availability. I guess we move on from here.

efudd

member

Activity: 504

Merit: 51

Smarty’s fix is incorrect. It causes miscalculations in other parts of the frequency handling around timeouts. This is why folk have issues with it in some circumstances.

I have zero miners other than two on loan so you clearly are off base.

The problem I had is that you posted it in my thread. Simple as that, not that you released a mod.

As far as “in it for money”, you are right I seek to have my time accounted for. As far as greed, you are simply wrong. One example is I have had a handful of users who purchased firmware and their machine could not handle an overclock; they were refunded. That is not greed.

Jason

Topic: Z9 Mini all batches 1-4 Unlocked with working temp, fan, Overclock NO Dev-Fee - page 3. (Read 1379 times)