Topic: ZCLASSIC / ZCL Vardiff/Static Diff enabled: https://zcl.suprnova.cc (Read 6019 times)

pm me your address and i'll look it up..

have now 0,33xx coins and didnt get paid yet...

I get it, but... Here's what happened: I mined for a day with no diff set; the pool showed me after some hours that I have a diff of 1225. I closed miner, I set diff to d=1225 in password, than restarted miner for one more day. Now the pool shows me diff 998. The rig isn't changed, I have the same hashrate of around 1720. But I did't count the shares between the 2 sesions.
Anyway, I don't know why the pool sets a bigger diff when I put "pass x", and a smaller diff, when I put "pass d=xxx" (where xxx is the diff from the previous session, set by the pool).
EWBF 0.3.4b Windows 10.

Of course higher diff shares are "weighted" more than lower diff ones. But if you have for example two 64 diff shares in s round and a different miner has one 128 share you'll get paid the same.

Variable difficulty is to optimize the efficiency of the miner, so that the miner can send shares in a manner which is optimal for his hardware and also optimal in relation to the pool

OK. The previous post was to long... Let's try a short one...
At zcl.suprnova.cc, what's the most valuable difficulty of a share, from a miner? The bigger number or the smaller one? Is 998 diff rewarded greater than 1225 diff? Or viceversa?

ok, done

@ocminer seems that I mined as annon user while address was associated to my existing account, can you please release the funds https://zcl.suprnova.cc/index.php?page=anondashboard&user=t1Q5rFM11s4jh7mRqF1uNTchvKvLSZRefEW

Hi ocminer,
I'm still a newbie in mining (started 2months ago) and I try to understand what to do and how to do it, by reading and testing every day...
I have a rig of 6 GTX 1060 3GB and I mine ZCL because the profit is biggest for my rig whit this coin.
I oc-ed them a bit, core + 100, mem +0, cause seems more stable, than +150/+500, and the drop in hashrate is small. I get 1720 sol/s in EWBF.
Why I write to you or anyone how is more expert than me )...
I think I must set a fixed diff, because I see few accepted shares, between 1 and 6/minute. With DSTM's ZM it was worst... 1 share/1 minute or 2 minutes. I don't have rejected shares. They are sent in 63ms.
You said a year ago, that it's best to have 1 share per 10sec. So...
1. How can I increase the number of accepted shares?
2. Setting a fixed diff will help? EWBF takes 2% fee, so 2 minutes in 100 minutes, I think, it switches to his pool, and than back to suprnova and the diff is reseted. (If I understand correctly).
3. I know to set the diff in password field --pass d=xxx, but what value should I put there? I don't know the right value... All I see in EWBF is the stats of GPU's, "info: target: 000250218f7do5fc..." and "info: detected new work: 4334".
I don't know much of what that means, what difficulty means and how to interpret all that.
Can you help me? Thanks!

%1 fee and no withdrawal fee still valid?

It's the same on both variants.

Hi,

If mining anonymously ZCL, and since the payment is done on 0,01 ZCL automatically, are there higher TX fees on these often small payments? Or everything is included in pool fee?

Otherwords, is it better then to register and make payments of like 0,1 ZCL as limit in that case, which would bring 10x less separate payments meaning probably much less TX fees?

Thanks!

i am using ebwf miner..i have nvidia 1060 6gb..well my hashes are constant..some times the pool shows less..some times more..my system is on 24*7..by the way..how long is a round??
thanks for the reply.bt it dsnt solve my problem

should go through now.



no.

are you using nicehash ? or normal rigs. it's a pplns pool, so you have to have a even hashrate over 10 rounds to get a decent payout, nicehash with short spikes in hashrate etc won't work

i am mining zcl on suprnova..my returns are 0.08zcl for 24hrs at 1700 hashes..what to mine shows .15..the network hash rate is also going down..but i m getting lesser payout..is the pool cheating me ??

Hi, Is it still possible to get a manual payout?

I've accrued 0.2173 ZCL  on  t1MSoP2N1FFB4tyusRuJcRDQtDmhb9Fwh3M

hopefully I wont have to post here every time i want to get a payout

Thank you! The payment has passed.
34e59b5016c094589de65e9ad7fbfaf9ed326c07dc8968e11a6f3d91d9c39086

Hi, I'm mining for a few days now and my balance is almost 0.15ZCL. Would like to know when the payout will be made. Thank you.

I am not receiving any transactions for found blocks anymore!

Already tried deleting worker and creating a new one. No effect.

ocminer, could yo please investigate? Username = zimth

thank you!

I've been using miningpoolhub which has a 0.9% pool fee.  On top of that, the ewbf miner I use I believe has a 2% fee as well, a total of 2.9%.  Outrageous!  I will switch to supernova and give it a shot.  Really looking to minimize the fees.  Does anyone know if there's a no fee miner for nvidia cards on windows?

Hello!
Please payout, mined anonymously:
https://zcl.suprnova.cc/index.php?page=anondashboard&user=t1T9fbDDE9nD9PEZW2ubo5iMX8Us5SdPfPM