Pages:
Author

Topic: Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 32. (Read 107046 times)

newbie
Activity: 100
Merit: 0
i get stratum connection error when i start the miner, anyone know whats wrong
newbie
Activity: 9
Merit: 0
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.


In the last 24 hours now it has maintained a 1% dev fee.  It did crash once in that time, but the dev fee it is reporting is 1%.  My pool side hashrate looks right on the mining pool page.


Are you solo mining ?

No I'm mining btx on yiimp.

Please do not overclock your GPU  too much !  The program stuck and did not perform work with GPU from  07:17:08 , there are no blocks inside a dev fee too and after no block/accepted shares.  We will add software watchdog in  future  releases, but again - please use recommended settings  and OC only after  miner  work stable and LONG time.

About defender... Miner is packed and Microsoft can't unpack the file and  thinks, a virus there. Nothing   new.


There was no overclocking and power level was set to 80%.  GPUs never went above 64 degrees.
member
Activity: 81
Merit: 16
( Service release) zealot/enemy-1.09b (z-enemy)
- Fixed compatibility issues that resulted in performance degradation with some non-yiimp pools. Now you'll see the expected hashrate on them.
- Kernels speed improvements : +1-2% performance due to optimizations.
- Support new algos : Tribus (-a tribus), recommended intensity for Tribus 20-21. Basic improve , can be a bit  faster (+5-10%) vs public miners.

Link  inside our test discord https://discord.gg/Ga8kUTr
member
Activity: 104
Merit: 44
1.09a is reporting more Hashrate in Console Window of each Rig, but the summed reported hashrate of Suprnova is much lower than with 1.08.   Huh Embarrassed

1.08 - ~190 MH/s
1.09a - ~150 MH/s

Why?
newbie
Activity: 3
Merit: 0
Good afternoon people,

I would like a little help if possible. First I started mining in Minepool, the first few days the reward was coming correctly (roughly what I should be comparing with whattomine). A few days later I realized that I had some huge payment gaps and the reward was already 20% below the estimate. This really was a much smaller pool than Ravenpool, so I decided to go for 3 consecutive days to Raven, but the payoff was up to 20-30% on average, I think. Then again, I voted to mine at Minepool and for 2 consecutive days the payoff was excellent (5-10% higher than the estimate). But from yesterday afternoon until today the business got complicated there and is several hours without block reward, much lower than the average that was great so far. Is there a pool that really trusts? Or does this really have to do with luck factor in the block break in the pool that I'm mining? I'm using the latest version of Enemy and am seriously considering mining alone. What is the minimum hash that would be suitable for good soil mining? Sorry for all the questions, but I really need some help. Thank you anyways.  Grin
newbie
Activity: 11
Merit: 0
hey
does -N, --statsavg change the output time or does this change how long the data it collect to create a avg?
member
Activity: 308
Merit: 10
the just released a patched version 1.09b
was this official release from enemy?
what are the improvements?
I`m loving this miner more and more, it`s updated almost on weekly basis
full member
Activity: 1148
Merit: 132
the just released a patched version 1.09b
newbie
Activity: 20
Merit: 0
When 19 GPU support? Smiley

What is stopping you using -d x,x,x  in 2 or 3 BAT files?


Miner cannot launch 18th gpu even only -d 17 selected gpu id range not defined thats what stops me. No problem on other miners so not card error CMD screen stays black.
member
Activity: 81
Merit: 16
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.


In the last 24 hours now it has maintained a 1% dev fee.  It did crash once in that time, but the dev fee it is reporting is 1%.  My pool side hashrate looks right on the mining pool page.


Are you solo mining ?

No I'm mining btx on yiimp.

Please do not overclock your GPU  too much !  The program stuck and did not perform work with GPU from  07:17:08 , there are no blocks inside a dev fee too and after no block/accepted shares.  We will add software watchdog in  future  releases, but again - please use recommended settings  and OC only after  miner  work stable and LONG time.

About defender... Miner is packed and Microsoft can't unpack the file and  thinks, a virus there. Nothing   new.
hero member
Activity: 1274
Merit: 556
Anyone mining VIT? What hashrates are you getting?
My 1080's are averaging 9.5MH/s at -i 20 with mild core o/c. I've had the miner crash after 15 minutes though so not sure how stable that thing is...
newbie
Activity: 9
Merit: 0
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.


In the last 24 hours now it has maintained a 1% dev fee.  It did crash once in that time, but the dev fee it is reporting is 1%.  My pool side hashrate looks right on the mining pool page.


Are you solo mining ?

No I'm mining btx on yiimp.
newbie
Activity: 14
Merit: 0
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.


In the last 24 hours now it has maintained a 1% dev fee.  It did crash once in that time, but the dev fee it is reporting is 1%.  My pool side hashrate looks right on the mining pool page.


Are you solo mining ?
newbie
Activity: 9
Merit: 0
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.


In the last 24 hours now it has maintained a 1% dev fee.  It did crash once in that time, but the dev fee it is reporting is 1%.  My pool side hashrate looks right on the mining pool page.
legendary
Activity: 3164
Merit: 1003
I used 109 last night and it did the first dev fee at 1% but the second one it did 22.0877%.

[NOTICE ] 18/05/13 07:16:59 Shares: 1129 (A:99.65%, R:0.35%), Diff:0.612, 62.99MH/s, 124ms - OK
[NOTICE ] 18/05/13 07:17:08 Shares: 1130 (A:99.65%, R:0.35%), Diff:0.557, 62.99MH/s, 124ms - OK
[DEV    ] 18/05/13 09:58:34 Mining some dev fee 1.00501%
[DEV    ] 18/05/13 12:29:03 Done mining dev fee.
[DEV    ] 18/05/13 12:29:03 Ratio: 22.0877%
[INFO   ] 18/05/13 12:29:06 zealot/enemy-1.09a miner
[INFO   ] 18/05/13 12:29:06 NVIDIA CUDA 9.1
[INFO   ] 18/05/13 12:29:06 Dev fee is 1.0%
[NOTICE ] 18/05/13 12:29:06 MAIN POOL----------------------------------------------

It wasn't mining on my pool for 5+ hours.  Seems like it just paused from 7:17 until 9:58.  Then mined dev fee for 2 and a half hours.  I'd post screen grabs but I think I'm too new to post pics.

wow this could be huge, 2.5 hr def fee?
Anyone else experience this with 1.09a ?
hero member
Activity: 1162
Merit: 500
hey guys, I've been using it for a few days, but now my win defender detected 2 trojans in the miner, just wanted to confirm with you they are false positives.

Here is the image: https://image.ibb.co/cksViy/Screen_Shot_2018_05_14_at_14_14_27.png

member
Activity: 308
Merit: 10
did anyone compared x16r profitability with different -d param?
usinsome 1063s and thinking to try it out, but not sure where to start
newbie
Activity: 30
Merit: 0
At the Blocks Factory (completely unrelated mind you) you can do this style:

Setting difficulty : connect to the stratum server with username.workername_diffxxx

I guess it is worth a try.
newbie
Activity: 30
Merit: 0
How do you add difficulty at suprnova?

z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20

Is this correct: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20 -d 16

?


No, this would mean that you are mining only with your 16th GPU (out of 16+).
Not sure if you can set difficulty for suprnova in your bat file unless they have different ports for high & low diff. I can't see any info about this on their rvn hompage.

I thought as much Sad

Suprnova is the best place for RVN and we can't even make use of the "Search mode" Sad

What about:  z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name.DIFF_16 -p x -i 20

I've seen that done on some pools with the username set up.
newbie
Activity: 73
Merit: 0
How do you add difficulty at suprnova?

z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20

Is this correct: z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20 -d 16

?


No, this would mean that you are mining only with your 16th GPU (out of 16+).
Not sure if you can set difficulty for suprnova in your bat file unless they have different ports for high & low diff. I can't see any info about this on their rvn hompage.
Pages:
Jump to: