Pages:
Author

Topic: ★ ZEIT ★ [COMMUNITY & KNIGHTS] [ULTRA LOW INFLATION] [MICRO-PAYMENTS] - page 43. (Read 1009334 times)

newbie
Activity: 76
Merit: 0

When will the website be up? What month? This coin has to get moving but without a site, it will be very slow. Plz come up with website with roadmap and white paper.

Ebolansk is working on it, please be patient as we all are  Wink
full member
Activity: 476
Merit: 100
The research team is very dedicated, I feel comfortable investing in a project with such a professional team. It's new innovation that can make your project have the biggest loyal. 
Hold to die Smiley
legendary
Activity: 1148
Merit: 1001
Official Zeitcoin community ambassador
is that normal the wallet always showing its out of sync? after done the procedure, what am i suposed to do know to keep them safe? just store the backup?

You should also ensure that your minting is locked until you are fully synched.
full member
Activity: 224
Merit: 100
is that normal the wallet always showing its out of sync? after done the procedure, what am i suposed to do know to keep them safe? just store the backup?
It always shows out of sync , until you are synced with the rest of the network.
Then a Checkmark appears at the bottom right of the screen.

Click on File , Backup Wallet.
Backup it up on multiple devices such as flash drives or USB hard drives.
Store in fire proof locations.

If you are not going to stake, then you don't need to make new backups.
If you do stake , update your backups weekly.


Hi KikLov

Can you tell me how will I run the command Zeitcoin-qt.exe -rescan when I am restoring the wallet.dat ?? Under the Command prompt?

And how long does it take to rescan?

I want to test how to restore wallet.dat file before I transfer all my coins.

You only need to run rescan, if you coin balance is not correct.
It has been awhile since I ran a rescan, but I believe no more than and hour.

You can run the Zeitcoin-qt.exe -rescan from the command prompt, or you can just modify the shortcut on your desktop with the - rescan and just remove it when finished.

 Cool
full member
Activity: 224
Merit: 100
something happened, it still says its out of sync but the coins appeared. I guess its all fine now. thank you all for the help.

You finally synced the block #, where you sent the coins out so now your wallet sees them.  Smiley

You can always compare your block # with the block explorer to see how many more blocks are required to be fully synced.
https://chainz.cryptoid.info/zeit/


 Cool
newbie
Activity: 32
Merit: 0
is that normal the wallet always showing its out of sync? after done the procedure, what am i suposed to do know to keep them safe? just store the backup?
full member
Activity: 224
Merit: 100
So MAC wallet almost up and good but still getting hung up.

I opened snapshot in folder told to on mac.

Then deleted folders/files from original and moved what was in the snapshot folder over leaving the others.

These are the files now on Zeitcoin folder:

blk0001.dat
blk0002.dat
database
db.log
debug.log
peers.dat
txleveldb
wallet.dat
ZeitBlockChainSnapShot-2018-01-09 (EMPTY FOLDER)
ZeitBlockChainSnapShot-2018-01-09.rar

I see wallet trying to sync (6 active connections).
Last block was 23 days ago (not 1400 days like before).

Still, ran it over night and sync wasn't complete.

Any suggestions?


Yes , now that you installed the snapshot correctly and your last block time updated.
I just put a new snapshot up on 1-09-2018, install it and your PC will sync in a few hours.   Smiley

You can monitor it's sync at Last Block Time under debug window.
If it does not increase after 10 minutes or so, restart the wallet.

 Cool
newbie
Activity: 34
Merit: 0
So MAC wallet almost up and good but still getting hung up.

I opened snapshot in folder told to on mac.

Then deleted folders/files from original and moved what was in the snapshot folder over leaving the others.

These are the files now on Zeitcoin folder:

blk0001.dat
blk0002.dat
database
db.log
debug.log
peers.dat
txleveldb
wallet.dat
ZeitBlockChainSnapShot-2018-01-09 (EMPTY FOLDER)
ZeitBlockChainSnapShot-2018-01-09.rar

I see wallet trying to sync (6 active connections).
Last block was 23 days ago (not 1400 days like before).

Still, ran it over night and sync wasn't complete.

Any suggestions?
newbie
Activity: 32
Merit: 0
something happened, it still says its out of sync but the coins appeared. I guess its all fine now. thank you all for the help.
legendary
Activity: 1988
Merit: 1768
Cryptopia updated their News Page
https://www.cryptopia.co.nz/News
Quote
Further Updates On LTC Basemarkets

I understand that while this may not be the update many people want to hear, it at least will hopefully provide everyone with a clear understanding of the path forward.

Cryptopia will be standing up new sister sites such as ltc.cryptopia.co.nz to handle base markets dedicated to LTC on their own trade engine and database to allow them to continue to trade, and allowing cryptopia.co.nz to resume registrations.

You will still need to transfer funds between the different sites to trade on each of them but this will be able to be handled instantly by Cryptopia in the background with atomic swaps, so you'll still have the single Cryptopia account that you use on the different exchanges.

As such, we will be permanently closing the LTC basemarkets on cryptopia.co.nz

Users will have a month to cancel their open orders after which point the markets will be closed and your orders will be cancelled for you.

Further updates on the timeline for the new LTC exchange will be posted as they become available.


 Cool

This are very good news. Read it here the first time. So i can still use cryptopia to buy more zeitcoins. So exciting about the news. Smiley
newbie
Activity: 32
Merit: 0
Number of connections: 12

and the weirdest thing is that the estimated number os blocks is half of the current number of blocks

Did you used the latest snapshot provided by KikloV ??

yes
newbie
Activity: 76
Merit: 0
Number of connections: 12

and the weirdest thing is that the estimated number os blocks is half of the current number of blocks

Did you used the latest snapshot provided by KikloV ??
newbie
Activity: 51
Merit: 0
Number of connections: 12

and the weirdest thing is that the estimated number os blocks is half of the current number of blocks
Close and reopen the wallet every hour or so when syncing...
newbie
Activity: 32
Merit: 0
Number of connections: 12

and the weirdest thing is that the estimated number os blocks is half of the current number of blocks
newbie
Activity: 76
Merit: 0
Hi, I follow the steps on creating the wallet, and I withdrawl from the exchange but its been an hour and nothing, and it says on the wallet that its out of sync. what can I do?

Did you install the Snapshot? 

Click on Help , Debug Window, and look at Last Block Time  (It should be dated at least 1-09-2018) is it?

 Cool

yes, it is

Ok ,
Then look at the time, and the blocks , if the block number is not increasing your wallets needs to be restarted.
Restart your Wallet and monitor the blocks , if they don't increase after ~10 minutes, just restart again.

Once fully synced a Check Mark with appear in the lower right hand corner indicating you are in sync with the network.
Also under Debug Windows is Number of Connections, how many connections do you have?

 Cool

I`m starting to get worried, since I withdrawl all my coins yesterday and the balance is still zero. They blocknumber is always increasing, but still, it says the wallet is out of sync and the balance is zero.

Don't worry , once it is synced your littles Zeits will appear Wink
newbie
Activity: 32
Merit: 0
Hi, I follow the steps on creating the wallet, and I withdrawl from the exchange but its been an hour and nothing, and it says on the wallet that its out of sync. what can I do?

Did you install the Snapshot? 

Click on Help , Debug Window, and look at Last Block Time  (It should be dated at least 1-09-2018) is it?

 Cool

yes, it is

Ok ,
Then look at the time, and the blocks , if the block number is not increasing your wallets needs to be restarted.
Restart your Wallet and monitor the blocks , if they don't increase after ~10 minutes, just restart again.

Once fully synced a Check Mark with appear in the lower right hand corner indicating you are in sync with the network.
Also under Debug Windows is Number of Connections, how many connections do you have?

 Cool

I`m starting to get worried, since I withdrawl all my coins yesterday and the balance is still zero. They blocknumber is always increasing, but still, it says the wallet is out of sync and the balance is zero.
Qan
jr. member
Activity: 159
Merit: 1
Understood.

For anyone who isn't looking to stake, he would still need to sync the wallet and transfer the coins from the exchange to wallet on the computer right?
If he does not want to stake, he can leave his coins on the exchange, but he is trusting the exchange completely when he does so.  Not recommended.

And when the wallet backup is made, does it also include the blocks?
When you use File , Backup Wallet , Only the Wallet.dat is Backed up.

Let's imagine I made the wallet backup, and now would like to restore it..and there's already a new wallet version out there? What would I need to do?
Follow the same steps as here :
1. Download the wallet for Windows.  
2. Confirm Hashes match.    
3. Run the wallet.  
4. Download & Install BlockChain Snapshot
5. Restore /Copy your wallet.dat into c:\Users\"username"\AppData\Roaming\Zeitcoin
6. Run the Wallet (Zeitcoin-qt.exe - rescan) and it will show your Balance.
  (Rescan takes a while , but makes sure your balance is correct.)


What I am looking to do is Install wallet, transfer coins, take backup and save at several places, forget about it and look at it when the coins are worth a lambo (LOL).


Answers in Blue.

 Cool

FYI:  Smiley


Hi KikLov

Can you tell me how will I run the command Zeitcoin-qt.exe -rescan when I am restoring the wallet.dat ?? Under the Command prompt?

And how long does it take to rescan?

I want to test how to restore wallet.dat file before I transfer all my coins.
legendary
Activity: 1344
Merit: 1046
Guys,
Can not withdraw from CoinExchange as they are saying the wallet is in maintenance mood. Any idea?

Coinexchange.io Warning: This currency is currently in maintenance mode. It is advised not to send deposits until the wallet is active.
When can I expect this to be done?

It has been like this for months... Coinex doesn't want to sync their wallet although sending them a lot of tickets in which we explained them how to do it .
No answer from them, no support at all. That's the reason why we have "blacklisted" them on the OP.
So to reply to your question, you should probably ask them  Wink This has nothing to do with us

Cheers,
Ray
sr. member
Activity: 491
Merit: 250
Guys,
Can not withdraw from CoinExchange as they are saying the wallet is in maintenance mood. Any idea?
full member
Activity: 224
Merit: 100
Cryptopia updated their News Page
https://www.cryptopia.co.nz/News
Quote
Further Updates On LTC Basemarkets

I understand that while this may not be the update many people want to hear, it at least will hopefully provide everyone with a clear understanding of the path forward.

Cryptopia will be standing up new sister sites such as ltc.cryptopia.co.nz to handle base markets dedicated to LTC on their own trade engine and database to allow them to continue to trade, and allowing cryptopia.co.nz to resume registrations.

You will still need to transfer funds between the different sites to trade on each of them but this will be able to be handled instantly by Cryptopia in the background with atomic swaps, so you'll still have the single Cryptopia account that you use on the different exchanges.

As such, we will be permanently closing the LTC basemarkets on cryptopia.co.nz

Users will have a month to cancel their open orders after which point the markets will be closed and your orders will be cancelled for you.

Further updates on the timeline for the new LTC exchange will be posted as they become available.


 Cool
Pages:
Jump to: