█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 107.

AngryDwarf

sr. member

Activity: 476

Merit: 501

Quote from: alfaboy23 on April 21, 2016, 02:00:30 AM

Good day, I'm on a testing mode for a decred on GPU mining using ccminer with this syntax:

Quote

ccminer_tpruvot -r 0 -a decred -o stratum+tcp://mine.zpool.ca:5744 -u 134stgUzSA4EwKcFcudGmZ8o33dfpur6xt -p x11,x13,x14,x15,qubit,lyra2v2,decred,c=btc

And here is the screenshot:

As the screenshot say, it is accepted, but I can't see the decred in my earnings, here: http://zpool.ca/?address=134stgUzSA4EwKcFcudGmZ8o33dfpur6xt

Can anybody advise?

Thanks in advance.

Wait for a decred block to be found.

alfaboy23

hero member

Activity: 546

Merit: 500

Good day, I'm on a testing mode for a decred on GPU mining using ccminer with this syntax:

Quote

ccminer_tpruvot -r 0 -a decred -o stratum+tcp://mine.zpool.ca:5744 -u 134stgUzSA4EwKcFcudGmZ8o33dfpur6xt -p x11,x13,x14,x15,qubit,lyra2v2,decred,c=btc

And here is the screenshot:

As the screenshot say, it is accepted, but I can't see the decred in my earnings, here: http://zpool.ca/?address=134stgUzSA4EwKcFcudGmZ8o33dfpur6xt

Can anybody advise?

Thanks in advance.

datlant

newbie

Activity: 17

Merit: 0

Hello,

could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.

Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.

Thanks in advance

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: semajjames on April 19, 2016, 12:32:46 PM

I am right in thinking that higher diff accepts are worth more yeah ?

Yes, because they contain more hash. But they take longer to submit so it evens out in theory.

semajjames

hero member

Activity: 528

Merit: 500

Quote from: citronick on April 19, 2016, 12:51:40 PM

Quote from: semajjames on April 19, 2016, 12:32:46 PM

Quote from: AngryDwarf on April 19, 2016, 02:29:37 AM

Quote from: semajjames on April 19, 2016, 01:12:31 AM

Quote from: citronick on April 18, 2016, 10:25:30 PM

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

yeah i know that ,,,,,, what i am saying is
IF i set my min diff to 3 like this "d=3" then the min diff my miner accepts should be 3 ,,, right
but it's not because if i set my min diff to 3 my miner still accepts 2 ,,,, why ?

thanks

Probably down to difficulty normalisation. Diff=4 works OK. No need to set the diff low on this algo, since it is the only coin in the algo and the block find times are quite long.

thanks I was more thinking of setting it up to stop accepting the 1 & 2 's ,,,,
I am right in thinking that higher diff accepts are worth more yeah ?

slower cards may have triggered this - is there a switch to force the d= level in sgminer, otherwise bring it up to crackfoo - he maybe able to adjust the stratum to start minimum 2 for DCR

it works like this 1 or 2 or 4 or 6 or 8 and so on

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: semajjames on April 19, 2016, 12:32:46 PM

Quote from: AngryDwarf on April 19, 2016, 02:29:37 AM

Quote from: semajjames on April 19, 2016, 01:12:31 AM

Quote from: citronick on April 18, 2016, 10:25:30 PM

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

yeah i know that ,,,,,, what i am saying is
IF i set my min diff to 3 like this "d=3" then the min diff my miner accepts should be 3 ,,, right
but it's not because if i set my min diff to 3 my miner still accepts 2 ,,,, why ?

thanks

Probably down to difficulty normalisation. Diff=4 works OK. No need to set the diff low on this algo, since it is the only coin in the algo and the block find times are quite long.

thanks I was more thinking of setting it up to stop accepting the 1 & 2 's ,,,,
I am right in thinking that higher diff accepts are worth more yeah ?

slower cards may have triggered this - is there a switch to force the d= level in sgminer, otherwise bring it up to crackfoo - he maybe able to adjust the stratum to start minimum 2 for DCR

semajjames

hero member

Activity: 528

Merit: 500

Quote from: AngryDwarf on April 19, 2016, 02:29:37 AM

Quote from: semajjames on April 19, 2016, 01:12:31 AM

Quote from: citronick on April 18, 2016, 10:25:30 PM

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

yeah i know that ,,,,,, what i am saying is
IF i set my min diff to 3 like this "d=3" then the min diff my miner accepts should be 3 ,,, right
but it's not because if i set my min diff to 3 my miner still accepts 2 ,,,, why ?

thanks

Probably down to difficulty normalisation. Diff=4 works OK. No need to set the diff low on this algo, since it is the only coin in the algo and the block find times are quite long.

thanks I was more thinking of setting it up to stop accepting the 1 & 2 's ,,,,
I am right in thinking that higher diff accepts are worth more yeah ?

AngryDwarf

sr. member

Activity: 476

Merit: 501

Quote from: semajjames on April 19, 2016, 01:12:31 AM

Quote from: citronick on April 18, 2016, 10:25:30 PM

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

yeah i know that ,,,,,, what i am saying is
IF i set my min diff to 3 like this "d=3" then the min diff my miner accepts should be 3 ,,, right
but it's not because if i set my min diff to 3 my miner still accepts 2 ,,,, why ?

thanks

Probably down to difficulty normalisation. Diff=4 works OK. No need to set the diff low on this algo, since it is the only coin in the algo and the block find times are quite long.

semajjames

hero member

Activity: 528

Merit: 500

Quote from: citronick on April 18, 2016, 10:25:30 PM

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

yeah i know that ,,,,,, what i am saying is
IF i set my min diff to 3 like this "d=3" then the min diff my miner accepts should be 3 ,,, right
but it's not because if i set my min diff to 3 my miner still accepts 2 ,,,, why ?

thanks

Megaquake

hero member

Activity: 630

Merit: 506

Quote from: citronick on April 17, 2016, 10:34:18 AM

Quote from: Erumara on April 17, 2016, 12:17:46 AM

Quote from: citronick on April 16, 2016, 10:54:47 PM

Quote from: Erumara on April 16, 2016, 05:26:50 PM

Quote from: Erumara on April 16, 2016, 03:29:53 PM

I added in that algorithm line and:

Ran at diff = 16000 for a couple hours, finally connection dropped and when it restarted I had lost 3/12 blades, 1 unit needed a reboot 2 units needed a power cycle.

Ran at diff = 18000 for a couple hours, connection drops, 1 unit recovered, 3 units locked up and needed power cycles, 1 unit needed a second power cycle and a soft reboot.

Now testing at diff = 20000, I hope something friggin works this profitability today is bonkers!

20000 had one machine lock up, had a failover at 22000 diff that they *almost* recovered from, only 1 blade dropped on one unit. So I have set them at 24000 diff and hopefully they stay up while I'm at my buddy's BBQ.

Is your profile BTC address valid citronik? I think you have some karma headed your way

the S7s, depending on which batch, are temperamental lot.

I use a safe 16000 most of the time, and use 22k-24k when solo mining PPC.

Well yeah, my BTC address is valid Grin

Sorry to say that even at 24k diff I still came home to one unit locked up, and two needing reboots.

Just a nudge to crackfoo to see if there's a solution to this issue.

Still sent some karma your way citronik, cheers!

erumara -- head to the S7 group, many experts there - I got plenty of help there on all S7 stuff, including cooling and the "nuts and bolts" stuff too.

https://bitcointalksearch.org/topic/m.12274011

you should absolutely set your SHA256 difficulty gh/s divided by 1.4!!!!!!

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: semajjames on April 18, 2016, 03:18:22 PM

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

my rig 5 x 390, i don't use the d= and let stratum do its thing, average 9-10ghs
the diff at that speed goes all the over past 16 onwards

semajjames

hero member

Activity: 528

Merit: 500

Quote from: citronick on April 18, 2016, 02:18:57 PM

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

yeah but if you set it to 3 does your miner go to 2 or 3

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: semajjames on April 18, 2016, 02:12:37 PM

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

I set mine like below, no issues:

-p c=BTC,decred,d=2

semajjames

hero member

Activity: 528

Merit: 500

Does anyone know why I can't set decreed difficulty in my password to more than "2" ?
cheers

semajjames

hero member

Activity: 528

Merit: 500

Quote from: JaredKaragen on April 17, 2016, 04:10:19 PM

Quote from: Erumara on April 17, 2016, 10:15:38 AM

Quote from: unitedminers on April 17, 2016, 09:46:35 AM

Quote from: crackfoo on November 28, 2015, 07:12:33 PM

zpool does not support the use of workername. Simply supply the BTC address you want to get paid in.

So, can I use just one BTC address for all (three) rigs?

.worker1

.worker2

.worker3
etc....

I believe worker names are not supported; or rather; they arent to be attached to the login name as they do no good. I havent had any issues before adding one; but I know ive been told by crackfoo that they arent used.

Just point all your miners at the same username and all mined funds will be payed out to that account =)

you can put names in the password like this
M1,d=2,c=BTC,decred=,,,,,,,,,,,,,,,,,
M2,d=2,c=BTC,decred=,,,,,,,,,,,,,,,,,
and then see each different rig's name under "miners" on the web page

Megaquake

hero member

Activity: 630

Merit: 506

SHA256 port is dead Huh

Erumara

full member

Activity: 140

Merit: 100

I mine because math

Quote from: citronick on April 17, 2016, 10:34:18 AM

erumara -- head to the S7 group, many experts there - I got plenty of help there on all S7 stuff, including cooling and the "nuts and bolts" stuff too.

https://bitcointalksearch.org/topic/m.12274011

Not having to dig through dozens of thread pages is why I went and asked the question Cheesy

In any case I finally bit the bullet and did my studying and got stratehm proxy running; and all of my problems seem to be solved. Running the proxy stratum during today's ~2hr downtime on the sha256 stratum answered a lot of questions too, I watched the stratum bounce on and off every few seconds for the duration of the downtime, I was able to force through a few shares but at great cost to the units overall hashrate.

It's no wonder the s7's choke on the connection, it's off and on a few dozen times a minute with the miner connecting and sending shares and getting rejects and disconnects in return, cgminer just has a breakdown followed by the OS under some circumstances. I realize now there's probably a pretty deep and difficult to fix problem with the server or the protocol it's using.

Thanks again!

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: Erumara on April 17, 2016, 10:15:38 AM

Quote from: unitedminers on April 17, 2016, 09:46:35 AM

Quote from: crackfoo on November 28, 2015, 07:12:33 PM

zpool does not support the use of workername. Simply supply the BTC address you want to get paid in.

So, can I use just one BTC address for all (three) rigs?

.worker1

.worker2

.worker3
etc....

I believe worker names are not supported; or rather; they arent to be attached to the login name as they do no good. I havent had any issues before adding one; but I know ive been told by crackfoo that they arent used.

Just point all your miners at the same username and all mined funds will be payed out to that account =)

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Erumara on April 17, 2016, 12:17:46 AM

Quote from: citronick on April 16, 2016, 10:54:47 PM

Quote from: Erumara on April 16, 2016, 05:26:50 PM

Quote from: Erumara on April 16, 2016, 03:29:53 PM

I added in that algorithm line and:

Ran at diff = 16000 for a couple hours, finally connection dropped and when it restarted I had lost 3/12 blades, 1 unit needed a reboot 2 units needed a power cycle.

Ran at diff = 18000 for a couple hours, connection drops, 1 unit recovered, 3 units locked up and needed power cycles, 1 unit needed a second power cycle and a soft reboot.

Now testing at diff = 20000, I hope something friggin works this profitability today is bonkers!

20000 had one machine lock up, had a failover at 22000 diff that they *almost* recovered from, only 1 blade dropped on one unit. So I have set them at 24000 diff and hopefully they stay up while I'm at my buddy's BBQ.

Is your profile BTC address valid citronik? I think you have some karma headed your way

the S7s, depending on which batch, are temperamental lot.

I use a safe 16000 most of the time, and use 22k-24k when solo mining PPC.

Well yeah, my BTC address is valid Grin

Sorry to say that even at 24k diff I still came home to one unit locked up, and two needing reboots.

Just a nudge to crackfoo to see if there's a solution to this issue.

Still sent some karma your way citronik, cheers!

erumara -- head to the S7 group, many experts there - I got plenty of help there on all S7 stuff, including cooling and the "nuts and bolts" stuff too.

https://bitcointalksearch.org/topic/m.12274011

Erumara

full member

Activity: 140

Merit: 100

I mine because math

Quote from: unitedminers on April 17, 2016, 09:46:35 AM

Quote from: crackfoo on November 28, 2015, 07:12:33 PM

zpool does not support the use of workername. Simply supply the BTC address you want to get paid in.

So, can I use just one BTC address for all (three) rigs?

.worker1

.worker2

.worker3
etc....

Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 107. (Read 217687 times)