█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 135.

semajjames

hero member

Activity: 528

Merit: 500

Quote from: crackfoo on February 20, 2016, 08:21:08 AM

Quote from: semajjames on February 20, 2016, 08:18:10 AM

what is the "c=BTC" part of the multi algo password for ?

It is for making sure the pool knows the address is for BTC. But you you use any address of the coins we mine but it's recommended to use BTC as altcoins can be removed at anytime.

as i thought thanks

crackfoo is there any way you can make it so we can put a "worker name" into the password so it shows before the "c=btc" that way we can see our worker name on the web page under the "extras" ?

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: semajjames on February 20, 2016, 08:18:10 AM

what is the "c=BTC" part of the multi algo password for ?

It is for making sure the pool knows the address is for BTC. But you you use any address of the coins we mine but it's recommended to use BTC as altcoins can be removed at anytime.

semajjames

hero member

Activity: 528

Merit: 500

what is the "c=BTC" part of the multi algo password for ?

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

I suggest btc.... It's 100% consistent

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: N8tureboy on February 19, 2016, 01:37:28 PM

Quote from: crackfoo on February 19, 2016, 01:24:57 PM

Quote from: N8tureboy on February 19, 2016, 01:21:53 PM

Could someone tell me why my account pays out at such an irregular interval? Sometimes is pays out every 2 hours, then a day, and most recently it's been almost a week.

I'm having it pay out in Litecoin.

Wallet: LcoPAA7rgGhDsAaHBpiZMhUuxiDWiNCZum

N8

We only payout in coins that we mine and with the current scrypt hashrates, we're not mining LTC... There were some payouts that went through after the xpool migration, but that it about it.

from the main page:

Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

So it will eventually pay out or i should change my wallet address to a BTC address?

Yeah, if we can get the hash rate up, then we can enable LTC. But at this rate, it will never switch into LTC.

You're probably batter off using BTC right now... untill you see LTC being mined.

N8tureboy

newbie

Activity: 8

Merit: 0

Quote from: crackfoo on February 19, 2016, 01:24:57 PM

Quote from: N8tureboy on February 19, 2016, 01:21:53 PM

Could someone tell me why my account pays out at such an irregular interval? Sometimes is pays out every 2 hours, then a day, and most recently it's been almost a week.

I'm having it pay out in Litecoin.

Wallet: LcoPAA7rgGhDsAaHBpiZMhUuxiDWiNCZum

N8

We only payout in coins that we mine and with the current scrypt hashrates, we're not mining LTC... There were some payouts that went through after the xpool migration, but that it about it.

from the main page:

Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

So it will eventually pay out or i should change my wallet address to a BTC address?

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: N8tureboy on February 19, 2016, 01:21:53 PM

Could someone tell me why my account pays out at such an irregular interval? Sometimes is pays out every 2 hours, then a day, and most recently it's been almost a week.

I'm having it pay out in Litecoin.

Wallet: LcoPAA7rgGhDsAaHBpiZMhUuxiDWiNCZum

N8

We only payout in coins that we mine and with the current scrypt hashrates, we're not mining LTC... There were some payouts that went through after the xpool migration, but that it about it.

from the main page:

Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

N8tureboy

newbie

Activity: 8

Merit: 0

Could someone tell me why my account pays out at such an irregular interval? Sometimes is pays out every 2 hours, then a day, and most recently it's been almost a week.

I'm having it pay out in Litecoin.

Wallet: LcoPAA7rgGhDsAaHBpiZMhUuxiDWiNCZum

N8

AngryDwarf

sr. member

Activity: 476

Merit: 501

Quote from: JaredKaragen on February 19, 2016, 01:49:51 AM

I know how you feel. The issue of being stuck on lyra constantly was my fault; But the profitability thing has me puzzled. maybe its just the pools luck is up or the new coins and changes to which ones we run are effecting it as well....

Maybe it is down to pool luck, I always get quite a bit of variance. Sha256 is a smaller part of my contributions, so perhaps the removal of the c11 algo has helped. It might not have been bringing in what it claimed. Looks like I have recently been clearing 1mBTC in 14 hours, where as not to long ago it was more like 19 hours (24 hours on a bad day). With the greater number of coins and algos to choose from on this site, I would expect profitability to be better than hashpower.co, but it doesn't seem to be proving that way. I am afraid it seems like the share contributions issue is acting like a huge non-transparent fee.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: darkwolf2k on February 19, 2016, 08:20:15 AM

I would be interested in seeing your batch file, still very new to this and working to finding what works right for me.

thanks

We also have a sample batch you can look at here:

www.zpool.ca/site/multialgo

darkwolf2k

newbie

Activity: 1

Merit: 0

Quote from: JaredKaragen on February 19, 2016, 01:49:51 AM

If anyone wants me to post up my GPU multi-algo batch file; I'm glad to share it if people need the help. I have a few copies of ccminer that I keep in the same directory to use for optimizes in certain algos.
[/quote]

I would be interested in seeing your batch file, still very new to this and working to finding what works right for me.

thanks

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: crackfoo on February 18, 2016, 09:16:02 AM

This is good to hear. Nothing's changed on our end... aside form adding DCR for mining support and that is all stratum work...

*shrug*

I know how you feel. The issue of being stuck on lyra constantly was my fault; But the profitability thing has me puzzled. maybe its just the pools luck is up or the new coins and changes to which ones we run are effecting it as well....

I also finally have my GPU set up with most of the profitable coins, and just started running a separate process for the newer CPU based coins. Plus my orbs are self-overclocking upwards of 1000Mhz; from the base of 800-850... it depends on temperature on how high they will go.

I don't monitor the processes on my antminer; so I can't comment on the issues people were having with sha256/diff/disconnects. And I am waiting on getting the S7 and doing another several days of comparing share% vs. hashrate% of pool. Regardless; I am very impressed; and I have brought a few people to this pool in recent days.

If anyone wants me to post up my GPU multi-algo batch file; I'm glad to share it if people need the help. I have a few copies of ccminer that I keep in the same directory to use for optimizes in certain algos.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: AngryDwarf on February 18, 2016, 03:06:20 PM

Well, actually that his poor to hear. No development and no explanation.
So change then?

Well, I did remove all the AUXPOW coins... so... that has improved the stability, but still seeing the occasional reset but much much less frequent without the AUXPOW coins. So perhaps that has also improved the profitability?

AngryDwarf

sr. member

Activity: 476

Merit: 501

Actually, my be you are right. Perhaps there is no change.

AngryDwarf

sr. member

Activity: 476

Merit: 501

Well, actually that his poor to hear. No development and no explanation.
So change then?

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: AngryDwarf on February 18, 2016, 06:03:40 AM

So far, profitably is looking very good indeed.

Quote from: JaredKaragen on February 18, 2016, 03:53:50 AM

another 5+mbtc day. not a fluke.

I'm very happy its a trend for me. Then again; I also have since yesterday; added yescrypt/argon and 4 orbs... so the more the better the way BTC is rising =)

This is good to hear. Nothing's changed on our end... aside form adding DCR for mining support and that is all stratum work...

*shrug*

s7icky

member

Activity: 106

Merit: 10

Quote from: crackfoo on February 18, 2016, 07:30:38 AM

Quote from: s7icky on February 18, 2016, 07:19:40 AM

Quote from: crackfoo on February 18, 2016, 06:46:30 AM

Quote from: s7icky on February 18, 2016, 12:06:05 AM

Quote from: crackfoo on February 17, 2016, 11:07:08 PM

Quote from: s7icky on February 17, 2016, 10:29:44 PM

decred not working?

It should be working. There's been miners on and off it for a little while now

[2016-02-18 00:05:06] HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl
[2016-02-18 00:05:06] get_work failed, retry after 30 seconds

Does your miner actually support stratum? Other pools I think are using getwork and not stratum

ive tried sp mod and tpruvot

The miner on there now is using: ccminer/1.7.3. AFAIK tpruvot doesn't support stratum yet.... not sure about SP....

got it working. thank you sir

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: s7icky on February 18, 2016, 07:19:40 AM

Quote from: crackfoo on February 18, 2016, 06:46:30 AM

Quote from: s7icky on February 18, 2016, 12:06:05 AM

Quote from: crackfoo on February 17, 2016, 11:07:08 PM

Quote from: s7icky on February 17, 2016, 10:29:44 PM

decred not working?

It should be working. There's been miners on and off it for a little while now

[2016-02-18 00:05:06] HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl
[2016-02-18 00:05:06] get_work failed, retry after 30 seconds

Does your miner actually support stratum? Other pools I think are using getwork and not stratum

ive tried sp mod and tpruvot

The miner on there now is using: ccminer/1.7.3. AFAIK tpruvot doesn't support stratum yet.... not sure about SP....

s7icky

member

Activity: 106

Merit: 10

Quote from: crackfoo on February 18, 2016, 06:46:30 AM

Quote from: s7icky on February 18, 2016, 12:06:05 AM

Quote from: crackfoo on February 17, 2016, 11:07:08 PM

Quote from: s7icky on February 17, 2016, 10:29:44 PM

decred not working?

It should be working. There's been miners on and off it for a little while now

[2016-02-18 00:05:06] HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl
[2016-02-18 00:05:06] get_work failed, retry after 30 seconds

Does your miner actually support stratum? Other pools I think are using getwork and not stratum

ive tried sp mod and tpruvot

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: s7icky on February 18, 2016, 12:06:05 AM

Quote from: crackfoo on February 17, 2016, 11:07:08 PM

Quote from: s7icky on February 17, 2016, 10:29:44 PM

decred not working?

It should be working. There's been miners on and off it for a little while now

[2016-02-18 00:05:06] HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl
[2016-02-18 00:05:06] get_work failed, retry after 30 seconds

Does your miner actually support stratum? Other pools I think are using getwork and not stratum

Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 135. (Read 217687 times)