| Content | Score | Started by | Date posted | ||
 |
 |
Sold miner to customer but it's not running the same for him - why? Hardware
Thanks guys - temp could be a factor - I ran these in the mid 50's (F) so nice a…
|
n/a | Ameador1 | April 27, 2021, 11:42:09 AM |
|
|
|
Sold miner to customer but it's not running the same for him - why? Hardware
I sold a miner S9-13.5T running Awesome Miner firmware. It was tuned to run reli…
|
n/a | Ameador1 | April 27, 2021, 06:23:51 AM |
|
|
|
Have my S9 miners been hacked? Mining support
I guess I was just surprised that with all the air flow I have and the target te…
|
n/a | Ameador1 | March 20, 2020, 10:01:51 AM |
|
|
|
Have my S9 miners been hacked? Mining support
Thanks @mikeywith!I am still muddling through everything. I only have one miner…
|
n/a | Ameador1 | March 19, 2020, 06:44:34 PM |
|
|
|
Have my S9 miners been hacked? Mining support
I am just now home and starting to work on it. So far many of the suggestions co…
|
n/a | Ameador1 | March 19, 2020, 06:14:25 PM |
|
|
|
Have my S9 miners been hacked? Mining support
Not sure what you mean - again, I manually configured them - one at a time direc…
|
n/a | Ameador1 | March 19, 2020, 05:23:49 PM |
|
|
|
Have my S9 miners been hacked? Mining support
some times settings don't take on awesome miner. are you posting on his thread…
|
n/a | Ameador1 | March 19, 2020, 04:49:59 PM |
|
|
|
Have my S9 miners been hacked? Mining support
[...]Voltage was tested at just a little over 240V. My power has thus far been v…
|
n/a | Ameador1 | March 19, 2020, 06:57:08 AM |
|
|
|
ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
How often are payouts made from this pool? Is it only after a block has been fou…
|
n/a | Ameador1 | March 20, 2020, 10:05:57 AM |
|
|
|
ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
How often are payouts made from this pool? Is it only after a block has been fou…
|
n/a | Ameador1 | March 20, 2020, 12:25:39 AM |
|
|
|
ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
I am getting ready to point a miner (or few) to your pool. But have a few questi…
|
n/a | Ameador1 | March 19, 2020, 06:06:16 PM |
|
|
|
Have my S9 miners been hacked? Mining support
As far as the chips are concerned, the pool being PPS+ or PPLNS has NO DIFFERENC…
|
n/a | Ameador1 | March 19, 2020, 01:55:13 PM |
|
|
|
Have my S9 miners been hacked? Mining support
don't mine at nicehash.try viabtc and see if it works better.The choice of pool…
|
n/a | Ameador1 | March 18, 2020, 09:44:09 PM |
|
|
|
Have my S9 miners been hacked? Mining support
I use Awesome Miner software to manage my miners. About 2 months ago I started u…
|
n/a | Ameador1 | March 18, 2020, 08:23:23 PM |
|
|
|
The winter mining setup Mining
That is an awesome setup. Way to take advantage of the renovation period to find…
|
n/a | Ameador1 | February 09, 2020, 10:14:00 PM |
|
|
|
The winter mining setup Mining
I have 12 miners running on my bottom floor - almost a basement - but not. It is…
|
n/a | Ameador1 | February 09, 2020, 12:34:28 PM |
|
|
|
[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners Mining (Altcoins)
@patrike It would be great if you could split the Awsome Miner thread into 2 thr…
|
n/a | Ameador1 | February 09, 2020, 11:18:09 AM |
|
|
|
Does anyone know power on surge levels for S9 models? Mining support
Hmmm - glad I asked. I had been primarily looking at 250v - 10A relays - but was…
|
n/a | Ameador1 | April 11, 2019, 07:14:20 AM |
|
|
|
Does anyone know power on surge levels for S9 models? Mining support
I am working on a remote power control system for my mines - mostly (and the mos…
|
n/a | Ameador1 | April 11, 2019, 06:45:30 AM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
A couple of questions if I may...One, I have apx 110TH/s that I can point to ckp…
|
n/a | Ameador1 | December 08, 2018, 02:49:02 PM |
|
|
|
What and where to mine? Mining (Altcoins)
I am running a batch of S9 variants (110.5TH/s) and some L3 variants (2200GH/s).…
|
n/a | Ameador1 | December 08, 2018, 01:58:02 PM |
|
|
|
Antminers doing better Accepted/Hour after a couple of restarts Mining support
If you are using nicehash and your hashrate is being moved to different pools an…
|
n/a | Ameador1 | November 29, 2018, 03:32:42 PM |
|
|
|
Antminers doing better Accepted/Hour after a couple of restarts Mining support
No i dont mean for profit, I mean as a control test to see if the miners act the…
|
n/a | Ameador1 | November 29, 2018, 12:21:31 PM |
|
|
|
Antminers doing better Accepted/Hour after a couple of restarts Mining support
Is this typical? And more importantly - does it matter? I have been trying to lo…
|
n/a | Ameador1 | November 29, 2018, 10:55:55 AM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
Sounds pretty cool. I had a few wireless s7 running at one point but still route…
|
n/a | Ameador1 | November 29, 2018, 11:41:44 AM |
|
|
|
Antminers doing better Accepted/Hour after a couple of restarts Mining support
Try pointing your miners to a real pool and not that nicehash junk and see if th…
|
n/a | Ameador1 | November 29, 2018, 11:14:41 AM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
I would check out coldcard for storage, samurai wallet if you have android. Cash…
|
n/a | Ameador1 | November 29, 2018, 11:03:07 AM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
Two, does this pool allow the S9 variants to use the ASICBoost(LPM) firmware to…
|
n/a | Ameador1 | November 29, 2018, 10:31:54 AM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
ANy recommended wallets? I have a Ledger Nano S. I also use Coinbase (Pro). I ha…
|
n/a | Ameador1 | November 28, 2018, 04:15:42 PM |
|
|
|
[55PH] ckpool.org ZERO FEE SPLNS no registration mining pool US/DE/CN Pools
A couple of questions if I may...One, I have apx 110TH/s that I can point to ckp…
|
n/a | Ameador1 | November 28, 2018, 03:38:15 PM |
|
|
|
Trouble upgrading to LPM firmware on S9 13.5 units Mining support
Don't know if it would help - but my S9-13.5T I'm testing with before doing my o…
|
n/a | Ameador1 | November 16, 2018, 02:36:26 PM |
|
|
|
Possible moisture issue Mining support
Do they have an exposed metal roof (internal and external) and cold outside caus…
|
n/a | Ameador1 | November 16, 2018, 02:43:17 PM |
|
|
|
Help and/or advise: bricked my S9 with flashing LPM fw Mining support
That's also my problem before I'm looking for s9_t9_SDcard.img but until now no…
|
n/a | Ameador1 | November 16, 2018, 09:03:37 PM |
|
|
|
Help and/or advise: bricked my S9 with flashing LPM fw Mining support
The Chinese video is difficult to see - low quality video - but looks like he is…
|
n/a | Ameador1 | November 16, 2018, 02:22:54 PM |
|
|
|
New used batch of S9 13.5T and PSU - not working - how to test PSUs? Mining support
Yeah, I will probably do that. And yes, 3 PSU's (APW3++ units) and 3 S9-13.5T's.…
|
n/a | Ameador1 | November 13, 2018, 09:40:03 AM |
|
|
|
New used batch of S9 13.5T and PSU - not working - how to test PSUs? Mining support
Bitmaxz, I will do this when I get home then. Thanks for looking at this. The in…
|
n/a | Ameador1 | November 14, 2018, 08:20:52 AM |
|
|
|
Antminer S9 HTML "413 - Request Entity Too Large" Mining support
What do you put on the MicroSD card - the downloaded Firmware file or do you hav…
|
n/a | Ameador1 | November 13, 2018, 08:49:55 PM |
|
|
|
New used batch of S9 13.5T and PSU - not working - how to test PSUs? Mining support
Can you try to flash this firmware s9_fix_upgrade.tar.gz it uses to fix the file…
|
n/a | Ameador1 | November 13, 2018, 10:49:53 AM |
|
|
|
Any way to use S9 serial number to determine miner specs? Mining support
Ahh, I only buy new so thats not been an issue. I know there is a way to pull th…
|
n/a | Ameador1 | November 13, 2018, 09:28:17 AM |
|
|
|
S9j unit says S9i in System Overview - incorrect firmware flash? Mining support
The labeling on the miner indicates it is an S9j. The owner thought it was an S9…
|
n/a | Ameador1 | November 13, 2018, 09:06:19 AM |
|
|
|
Any way to use S9 serial number to determine miner specs? Mining support
Thanks for that - I was trying to confirm that as well. I am not too bad with th…
|
n/a | Ameador1 | November 09, 2018, 02:08:44 PM |
|
|
|
Any way to use S9 serial number to determine miner specs? Mining support
Thank you - much appreciated! If that's true - I would like to think that the Sy…
|
n/a | Ameador1 | November 09, 2018, 01:56:45 PM |
|
|
|
S9j unit says S9i in System Overview - incorrect firmware flash? Mining support
You can flash the s9j firmware if you want, but there may be no need to do so if…
|
n/a | Ameador1 | November 09, 2018, 01:43:28 PM |
|
|
|
Any way to use S9 serial number to determine miner specs? Mining support
Yeah, I know the sticker tells you - but what about scams - could someone create…
|
n/a | Ameador1 | November 09, 2018, 01:34:59 PM |
|
|
|
New used batch of S9 13.5T and PSU - not working - how to test PSUs? Mining support
I tested the PSUs which looked to be brand new - sealed original tape. The miner…
|
n/a | Ameador1 | November 09, 2018, 01:35:51 AM |
|
|
|
Any way to use S9 serial number to determine miner specs? Mining support
Like the Bitmain Warranty checker will give warranty data based on SN - is there…
|
n/a | Ameador1 | November 09, 2018, 02:04:47 AM |
|
|
|
S9j unit says S9i in System Overview - incorrect firmware flash? Mining support
I just got this unit used - the box, miner labels, etc - all say S9j-14T - but G…
|
n/a | Ameador1 | November 09, 2018, 12:37:13 AM |
|
|
|
New firmware for antminer S9 - less power consumption Mining software (miners)
I just installed the BM FW 2018-11-02 to a 13.5T S9. The miner seems to be worki…
|
n/a | Ameador1 | November 07, 2018, 11:30:51 PM |
|
|
|
Braiins OS: open-source mining firmware [S9, T1]. New release includes AsicBoost Mining software (miners)
Will this OS with LPM and/or the newest 1023 Bitmain firmware with LPM work to m…
|
n/a | Ameador1 | October 30, 2018, 12:30:23 PM |
|
|
|
Antminer S9 Firmware Update Bitmain Release Overt AsicBoost 🤠 Mining (Altcoins)
As DefiantMiner said, you can use "normal" 110-120 outlets - but I would recomme…
|
n/a | Ameador1 | October 26, 2018, 11:01:50 AM |
|
|
|
Antminer S9 Firmware Update Bitmain Release Overt AsicBoost 🤠 Mining (Altcoins)
On each miner? Wow! Overkill and expensive. You will have to build your own…
|
n/a | Ameador1 | October 26, 2018, 08:31:34 AM |
|
|
|
Turning off machine with red light causes a different machine to turn red. Mining support
I know it's a bit of a pain as I do it, but I have my router to assign specific…
|
n/a | Ameador1 | August 03, 2018, 03:53:22 PM |
|
|
|
[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners Mining (Altcoins)
I have AwesomeMiner Cloud services - is there a way to set upload frequency?
|
n/a | Ameador1 | August 01, 2018, 09:45:58 AM |
|
|
|
Antminer S9 - Stops hashing after booting up - Pretty sure it's a fan issue. Mining support
This is not true, the warranty stickers cover the screws holding the hashboards…
|
n/a | Ameador1 | July 26, 2018, 03:30:35 PM |
|
|
|
Cooling my racks with "free-cooling" Mining support
I agree with dutchlincoln. Blowing/Creating air flow via pressure on the miners…
|
n/a | Ameador1 | July 26, 2018, 01:17:58 PM |
|
|
|
Antminer S9 - Low hashrate reported in the POOL Mining support
I tried to swap the eth cable from one of the miners that's working fine with on…
|
n/a | Ameador1 | July 26, 2018, 12:08:37 PM |
|
|
|
On-board auto reboot with Antminer S9 (daily reboots) Mining support
Are you running the most current firmware for your miners?I have an S9 that I bo…
|
n/a | Ameador1 | July 26, 2018, 06:49:38 AM |
|
|
|
[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 10000 miners Mining (Altcoins)
I am running AM Professional. I am not profit switching. I run all my ASIC miner…
|
n/a | Ameador1 | July 25, 2018, 06:53:21 PM |
|
|
|
Antminer S9 - Low hashrate reported in the POOL Mining support
How about changing ports that your miners are connected to on your switch or rou…
|
n/a | Ameador1 | July 25, 2018, 02:36:37 PM |
|
|
|
Turning off machine with red light causes a different machine to turn red. Mining support
That's odd. Any chance of IP address conflicts of some sort? I mean, you'd think…
|
n/a | Ameador1 | July 25, 2018, 11:57:45 AM |
|
|
|
Antminer S9 - Stops hashing after booting up - Pretty sure it's a fan issue. Mining support
Did you go through Bitmain? Keep in mind that their warranty stickers are on the…
|
n/a | Ameador1 | July 25, 2018, 01:46:48 PM |
|
|
|
Surge Protection for Antminer in Canada Mining support
Wow, I didn't think about one of those. Are you running your miners off of that?…
|
n/a | Ameador1 | July 25, 2018, 01:39:05 PM |
|
|
|
Antminer S9 - Stops hashing after booting up - Pretty sure it's a fan issue. Mining support
It looks like the fan detector is damaged. Did you try to reset them first to fa…
|
n/a | Ameador1 | July 25, 2018, 01:19:58 PM |
|
|
|
Antminer S9 - Stops hashing after booting up - Pretty sure it's a fan issue. Mining support
I would think if it were the controller, then it would not report the working fa…
|
n/a | Ameador1 | July 25, 2018, 12:57:29 PM |
|
|
|
Antminer S9 - Stops hashing after booting up - Pretty sure it's a fan issue. Mining support
Your image link is not working.Check the wiring on the fan, compare it to the wi…
|
n/a | Ameador1 | July 25, 2018, 12:38:13 PM |
|
|
|
Surge Protection for Antminer in Canada Mining support
You can get a whole home surge protector that installs off the main panel. They…
|
n/a | Ameador1 | July 25, 2018, 12:29:45 PM |
|
|
|
Prevent dust from collecting on S9 intake fan grate? Mining support
My box method using 3/8" plywood and 2x4's cost probably $150 for a 16 miner spa…
|
n/a | Ameador1 | June 04, 2018, 06:23:50 PM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
So it's 1 out of 10 S9i had this error or just 1/1 ? I've just got my hand on 19…
|
n/a | Ameador1 | June 06, 2018, 06:07:31 AM |
|
|
|
I share my installation with you - what do you think of this small farm Mining support
I used the BTC.com tool you used - here are my results with my "box" setup:(The…
|
n/a | Ameador1 | June 05, 2018, 05:03:11 PM |
|
|
|
I share my installation with you - what do you think of this small farm Mining support
I like the cold side/hot side approach with the larger vent fans. If you were th…
|
n/a | Ameador1 | June 04, 2018, 08:14:12 PM |
|
|
|
Prevent dust from collecting on S9 intake fan grate? Mining support
Depends on your setup design. I just built a box 4' high, 4' deep, 5' wide. The…
|
n/a | Ameador1 | June 02, 2018, 09:05:44 PM |
|
|
|
Heatup sockets Mining support
What is your power source? 110/120v or 220/240V?Have you check voltages on the P…
|
n/a | Ameador1 | June 02, 2018, 10:08:21 AM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
Just shipped the S9i out to Bitmain repair facility in Washington (state). Bette…
|
n/a | Ameador1 | June 02, 2018, 09:50:20 AM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
Well, this did not help. I swapped an S9 controller into the S9i, re-flashed the…
|
n/a | Ameador1 | June 01, 2018, 07:21:53 PM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
I am having the exact same issue that you describe. driver-bitmain.c:5474: Erro…
|
n/a | Ameador1 | June 01, 2018, 04:50:09 PM |
|
|
|
Pangolinminer & Whatsminer FAQs Hardware
Does anyone have any spare hash boards for an M3? I have one I got in December f…
|
n/a | Ameador1 | June 01, 2018, 02:06:46 PM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
First off, the bitmain response is essentially worthless boilerplate and unrelat…
|
n/a | Ameador1 | June 01, 2018, 01:52:22 PM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
I think I would try reloading the firmware from the bitmain website to see if aw…
|
n/a | Ameador1 | May 31, 2018, 12:02:14 PM |
|
|
|
S9i with driver-bitmain.c:5474: Error of set PIC FLASH... Mining support
I have a new S9i 13.5T. Started it up and it ran fine. Setup mining pool info, a…
|
n/a | Ameador1 | May 29, 2018, 04:44:01 PM |
|
|
|
Antminer L3+ fans not being run properly... Mining (Altcoins)
I guess I just don't understand why the unit would not just increase the fan spe…
|
n/a | Ameador1 | May 18, 2018, 12:48:01 PM |
|
|
|
L3+ voltage tuning script Mining (Altcoins)
this time i got this erroe on miner that i already run script before:Undefined e…
|
n/a | Ameador1 | May 18, 2018, 11:43:05 AM |
|
|
|
Bitmain L3+ Voltage Control Tool...Free :) Mining (Altcoins)
/Users/macmini/Downloads/set_voltageso I think that is the directory aboveso I t…
|
n/a | Ameador1 | May 18, 2018, 10:45:16 AM |
|
|
|
Bitmain L3+ Voltage Control Tool...Free :) Mining (Altcoins)
Thx jstefanop. Testing my ten L3+ with lowest voltage (0xfe). Currently running…
|
n/a | Ameador1 | May 16, 2018, 08:11:05 PM |
|
|
|
Bitmain L3+ Voltage Control Tool...Free :) Mining (Altcoins)
I used the software that @jstefanop has put out here on 2 L3+ units last night!…
|
n/a | Ameador1 | May 16, 2018, 09:33:03 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
fanatic26 is correct I use this onehttps://www.amazon.com/Electricity-Consumptio…
|
n/a | Ameador1 | May 16, 2018, 08:41:46 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
No, I mean the power consumption savings were something like 10-20 Watts only. I…
|
n/a | Ameador1 | May 15, 2018, 02:40:45 PM |
|
|
|
Antminer L3+ fans not being run properly... Mining (Altcoins)
I guess I just don't understand why the unit would not just increase the fan spe…
|
n/a | Ameador1 | March 01, 2018, 12:43:49 PM |
|
|
|
Antminer L3+ fans not being run properly... Mining (Altcoins)
I just got 2 Antminer L3+ units. Both have the same firmware version. They are c…
|
n/a | Ameador1 | March 01, 2018, 07:47:20 AM |
|
|
|
Pangolinminer & Whatsminer FAQs Hardware
Either keep searching for a hash board replacement or just live with it. You sho…
|
n/a | Ameador1 | February 14, 2018, 07:21:05 PM |
|
|
|
Pangolinminer & Whatsminer FAQs Hardware
Does anyone here know how or where to get a hash board for the M3? I have a unit…
|
n/a | Ameador1 | February 07, 2018, 10:39:23 PM |
|
|
|
[Free] ★ yogg's free escrow service ★ Fast ★ Reliable ★ Secure Services
I assume you are located in the US? I see your location is "in the US". I would…
|
n/a | Ameador1 | January 04, 2018, 08:18:12 AM |
|
|
|
[Free] ★ yogg's free escrow service ★ Fast ★ Reliable ★ Secure Services
Hi Ameador1,Yes, I believe I can help you.You got the concept of escrow right :…
|
n/a | Ameador1 | January 03, 2018, 02:10:34 PM |
|
|
|
[Free] ★ yogg's free escrow service ★ Fast ★ Reliable ★ Secure Services
Hello yogg!I am trying to start a small business selling miners and related equi…
|
n/a | Ameador1 | January 03, 2018, 01:33:32 PM |
|
|
|
LEGENDARY BITCOIN ESCROW SERVICE (More than 19K BTC transferred) - 0.003 BTC! Services
Also, another question... if I mayIf I sell through an escrow transaction - does…
|
n/a | Ameador1 | January 03, 2018, 09:22:11 AM |
|
|
|
LEGENDARY BITCOIN ESCROW SERVICE (More than 19K BTC transferred) - 0.003 BTC! Services
^I’m not interested in being an escrow for users operating as a business of sort…
|
n/a | Ameador1 | January 03, 2018, 09:11:05 AM |
|
|
|
Scammers Computer hardware |
n/a | Ameador1 | January 02, 2018, 09:10:03 PM |
|
|
|
Scammers Computer hardware |
n/a | Ameador1 | January 02, 2018, 06:57:40 PM |
|
|
|
Scammers Computer hardware |
n/a | Ameador1 | January 02, 2018, 06:09:13 PM |
|
|
|
LEGENDARY BITCOIN ESCROW SERVICE (More than 19K BTC transferred) - 0.003 BTC! Services
Is there a link to a post you can give me to explain exactly how this works OgNa…
|
n/a | Ameador1 | January 02, 2018, 03:51:36 PM |
|
|
|
How to Save Network/Transaction Fees from Coinbase? Currency exchange
Ok. So they give you a wallet address on GADX.com, you transfer BTC from CoinBas…
|
n/a | Ameador1 | December 10, 2017, 12:40:06 AM |
Jump to: