| Content | Score | Started by | Date posted | ||
 |
 |
Antminer A3 - 2 dead hash boards Mining (Altcoins)
Tried 3 different and 100% working APW3++. Low freq. makes no sense.Then there i…
|
n/a | blissz | January 26, 2018, 05:21:07 AM |
|
|
|
Antminer A3 - 2 dead hash boards Mining (Altcoins)
Make sure to swap the cables of the hashing boards to make sure it's not a cable…
|
n/a | blissz | January 26, 2018, 04:48:41 AM |
|
|
|
Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 Mining (Altcoins)
curious to know if a 4th chain can be connected to the D3 since there is a 4th s…
|
n/a | blissz | January 26, 2018, 04:41:52 AM |
|
|
|
[NEW] Bitmain Announces Antminer A3 Mining (Altcoins)
Harper86 and Cryptonica helped me out getting a backup of the A3 firmware. thank…
|
n/a | blissz | January 24, 2018, 03:03:04 PM |
|
|
|
[NEW] Bitmain Announces Antminer A3 Mining (Altcoins)
As there is no firmware available yet from bitmain I ask it over here:If one tha…
|
n/a | blissz | January 22, 2018, 06:24:33 PM |
|
|
|
[NEW] Bitmain Announces Antminer A3 Mining (Altcoins)
As there is no firmware available yet from bitmain I ask it over here:If one tha…
|
n/a | blissz | January 22, 2018, 05:57:55 PM |
|
|
|
[NEW] Bitmain Announces Antminer A3 Mining (Altcoins)
As there is no firmware available yet from bitmain I ask it over here:If one tha…
|
n/a | blissz | January 22, 2018, 05:38:55 PM |
|
|
|
antminer d3 HW counts Mining (Altcoins)
Guys, can high number of hw errors physically break chips / hashboard?No, unless…
|
n/a | blissz | January 22, 2018, 04:48:49 PM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
WARNING THIS FIRMWARE MIGHT VOID THE WARRANTY ON YOUR MINERv1.02 :: 14/01/2018 :…
|
n/a | blissz | January 05, 2018, 08:01:55 AM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
Hi all,As you might have noticed there is some discussion going on about the GPL…
|
n/a | blissz | January 18, 2018, 05:11:36 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
WARNING THIS FIRMWARE MIGHT VOID THE WARRANTY ON YOUR MINERThis is for the D3 on…
|
n/a | blissz | November 01, 2017, 04:27:52 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi all,As you might have noticed there is some discussion going on about the GPL…
|
n/a | blissz | January 18, 2018, 05:09:39 AM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
Good to hear it works good! I don't know how to save the time as the memory is v…
|
n/a | blissz | January 17, 2018, 11:10:40 AM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
HI!i get 3 HW error in 10 min. Frequency Volt Watt H…
|
n/a | blissz | January 16, 2018, 05:53:32 PM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
Hello, i have tested today the mod firmware for L3+ on one of my L3+ it work fin…
|
n/a | blissz | January 16, 2018, 05:46:35 PM |
|
|
|
Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) Mining (Altcoins)
So I ran for the last few days. And I have seen my voltages reset about 3 times.…
|
n/a | blissz | January 16, 2018, 05:45:29 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi All,I wasn't aware of the GPL license, so I did some investigation last days.…
|
n/a | blissz | January 16, 2018, 10:52:04 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi blissz,Can we get some more details on how your dev fees work and how long th…
|
n/a | blissz | January 16, 2018, 10:33:08 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi Blissz,I am basically new to mining. I already have v1.12 in my D3. Yesterday…
|
n/a | blissz | January 16, 2018, 09:37:54 AM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
v1.02 :: 14/01/2018 :: L3+ recommended updateDownload:https://mega.nz/#!mkRWFKpB…
|
n/a | blissz | January 14, 2018, 06:23:22 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
- now shows the voltage setting on the overview pageCan you comment on the volta…
|
n/a | blissz | January 14, 2018, 06:20:22 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
I would add this - low hashrate option - to my miner if i could, is hosted. I fi…
|
n/a | blissz | January 14, 2018, 07:54:03 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Seems I may have a dead board too Was running fine till last week, the last 6 c…
|
n/a | blissz | January 14, 2018, 07:52:50 AM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
blissz, you didn't answer. If the temperature will be 80C, would acic turned off…
|
n/a | blissz | January 14, 2018, 04:06:00 AM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
I'm liking the new update better since we can run the dev fee mining all at once…
|
n/a | blissz | January 13, 2018, 04:32:21 PM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
Thank you for all your hard work. I have 6 L3+ and wondering if this will help m…
|
n/a | blissz | January 13, 2018, 04:31:32 PM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
blaaa.......my results from http://192.168.0.10/cgi-bin/get_status_api.cgi... ca…
|
n/a | blissz | January 13, 2018, 01:38:39 PM |
|
|
|
Antminer L3+ Blissz firmware (13/01/2018 v1.01 stable) Mining (Altcoins)
This 24hr switch is perfect. Need that in the D3 too.Great job Blissz!Thanks, w…
|
n/a | blissz | January 13, 2018, 10:47:26 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
v1.01 :: 13/01/2018 :: L3+ recommended updateDownload:https://mega.nz/#!GoJDERhK…
|
n/a | blissz | January 13, 2018, 08:36:30 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
I rolled the dice and flashed my D3, i have to say, this firmware has a lot more…
|
n/a | blissz | January 13, 2018, 07:37:39 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
v1.01 :: 13/01/2018 :: L3+ recommended updateDownload:https://mega.nz/#!GoJDERhK…
|
n/a | blissz | January 13, 2018, 05:43:08 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
...can you post the output of this? Thanks!http:///cgi-bin/get_status_api.cgiI e…
|
n/a | blissz | January 13, 2018, 05:42:51 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
hello.i f i can make any further test, you are welcome to ask.your product is gr…
|
n/a | blissz | January 13, 2018, 05:42:22 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
K so I have noticed with this new one if I put any board to "highest" on the vol…
|
n/a | blissz | January 13, 2018, 05:39:26 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
...can you post the output of this? Thanks!http:///cgi-bin/get_status_api.cgi
|
n/a | blissz | January 13, 2018, 05:16:30 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
hello.i f i can make any further test, you are welcome to ask.your product is gr…
|
n/a | blissz | January 13, 2018, 05:14:14 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
...Did not work. I tried it on 3 different Browser. Same problem on all my L3+.…
|
n/a | blissz | January 13, 2018, 04:46:47 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
Hello, the result look great, there is not much info about the silent mode, I me…
|
n/a | blissz | January 13, 2018, 04:36:03 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins) |
n/a | blissz | January 13, 2018, 04:28:08 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi everyoneSomething when wrong while flashing firmwareMiner won't startMade sd…
|
n/a | blissz | January 13, 2018, 04:21:36 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
The best thing about this firmware for me is the fact that my miner runs despite…
|
n/a | blissz | January 13, 2018, 04:18:15 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hello! Too many pages. My eyes are crossed. I have a D3 with a dead board. Is th…
|
n/a | blissz | January 13, 2018, 04:16:53 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
Same here. Moreover the Miner Status page shows no entries.can you make a screen…
|
n/a | blissz | January 13, 2018, 04:11:34 AM |
|
|
|
Antminer L3+ Blissz firmware (12/01/2018 v1.0 stable) Mining (Altcoins)
I'm testing my l3+ with the new 1.0 stable version and every time I restart the…
|
n/a | blissz | January 13, 2018, 04:11:02 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
v1.0 :: 12/01/2018 :: L3+ recommended updateDownload:https://mega.nz/#!z9gklSSL!…
|
n/a | blissz | January 12, 2018, 09:07:00 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
I have a hosted miner so would like to ask some questions. I have no access to t…
|
n/a | blissz | January 12, 2018, 09:04:12 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
After installing the firmware i cant login in to the ssh connection the root /ad…
|
n/a | blissz | January 10, 2018, 03:53:16 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi guys,I really would like to have other algorithm support on the D3 as well, s…
|
n/a | blissz | January 10, 2018, 03:29:38 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Fantastic job Blissz! Running at stock frequency on lowest voltage... very stab…
|
n/a | blissz | January 08, 2018, 09:11:50 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Awesome, I will be adding this to my L3+'s as soon as they come in. Blissz, so t…
|
n/a | blissz | January 08, 2018, 09:10:54 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Thanks much for the fast reply.I have updated the settings as follow and it seem…
|
n/a | blissz | January 07, 2018, 05:52:28 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Hi there,Thanks for the firmware.I've been able to flash it no pb and have no pr…
|
n/a | blissz | January 07, 2018, 03:12:15 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
I was using v1.11 and my miner rebooted every few hours, but both checkboxes for…
|
n/a | blissz | January 07, 2018, 02:18:21 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Have an issue with several miners - when blade connected to 4th connector - Hash…
|
n/a | blissz | January 07, 2018, 02:14:51 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Did you try repacking it after you unpacked it, and then trying to upgrade? Also…
|
n/a | blissz | January 07, 2018, 10:33:35 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
hi.i just want to flash l3+. using file tar.gz not unpack it. but cant flash it.…
|
n/a | blissz | January 07, 2018, 05:54:07 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
zero is not needed, one or two HW errors a minute is fine, but I found the L3+ i…
|
n/a | blissz | January 07, 2018, 05:15:50 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
hi.i just want to flash l3+. using file tar.gz not unpack it. but cant flash it.…
|
n/a | blissz | January 07, 2018, 05:12:02 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
does anyone else have D3 blades crapping out left and right??? (even ones NOT m…
|
n/a | blissz | January 06, 2018, 05:21:35 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
I wish to install this firmware, is working well for everybody?Which is the best…
|
n/a | blissz | January 06, 2018, 04:53:01 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Awesome Blissz ! Working great. I am using your D3 FW since the beginning (as a…
|
n/a | blissz | January 06, 2018, 11:02:53 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Thanks for your firmware. I have some questions. Thanks for the answers.1. I'm w…
|
n/a | blissz | January 06, 2018, 11:02:29 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Btw here is a screenshot of my dirty overclock I appreciate your effortnice on…
|
n/a | blissz | January 06, 2018, 04:39:09 AM |
|
|
|
Antminer D3 Blissz firmware (26/11 must update!!!) Mining (Altcoins)
AgreedThe spikes come from the high difficulty of the the work packages, but add…
|
n/a | blissz | January 06, 2018, 03:50:34 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
v2.06 beta :: 05/01 :: test versionDownload:https://mega.nz/#!mxwhmCZb!8Xsj5c2bf…
|
n/a | blissz | January 06, 2018, 03:52:51 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Btw here is a screenshot of my dirty overclock I appreciate your effortnice on…
|
n/a | blissz | January 06, 2018, 03:43:05 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
....4) Worked like a champ...card by card came back online...take approx 10 minu…
|
n/a | blissz | January 06, 2018, 03:41:37 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
[Oh man! *rofl* glad you brought that up.. I gotta move all these to diff direct…
|
n/a | blissz | January 05, 2018, 07:26:15 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
OH! a bitmain thing (in general - though less often needed on the newer machines…
|
n/a | blissz | January 05, 2018, 07:21:10 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
*large log file*I've seen this on people who accidentally flashed the D3 firmwar…
|
n/a | blissz | January 05, 2018, 07:14:23 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
assuming you flashed it on a L3+? There is a flaw in the guide yet, so I will c…
|
n/a | blissz | January 05, 2018, 06:59:59 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Thanks for putting this out there!Running into some issues after the upgrade...n…
|
n/a | blissz | January 05, 2018, 06:39:46 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
The fan speed is still not 6600, it is 4100 on 100%.Setting pool groups resets t…
|
n/a | blissz | January 05, 2018, 06:04:06 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
Because of PM limit per hour posting here.Fan RPM is also broken: on stock firmw…
|
n/a | blissz | January 05, 2018, 05:47:11 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.02 beta update) Mining (Altcoins)
v0.02 :: 05/01/2018 :: L3+ BETA recommended updateDownload:https://mega.nz/#!a9Q…
|
n/a | blissz | January 05, 2018, 05:32:06 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
More than worth it IMO.Especially with being able to clock it like crazy up or d…
|
n/a | blissz | January 05, 2018, 02:00:45 PM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
yes because it was blank , i dont have those logs nowwith 384 Mhz and lowest asi…
|
n/a | blissz | January 05, 2018, 11:06:25 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
see that on logs , dont know if it s normal , can someone check to confirm ?Code…
|
n/a | blissz | January 05, 2018, 10:55:29 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
Thanks for the firmware - before I load in on my rigs, how is the mining fee han…
|
n/a | blissz | January 05, 2018, 10:47:55 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
Hey, nice news , thanks to warn me about itwill test Thank, let me know how it w…
|
n/a | blissz | January 05, 2018, 10:40:08 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
Welp - I was able to get 510 MHs on 394Mhz on the lowest setting - sadly it look…
|
n/a | blissz | January 05, 2018, 10:37:05 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
As requested by a lot of people through PM, I am happy to announce the first Bet…
|
n/a | blissz | January 05, 2018, 08:04:09 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins)
YESSS Im pumped! Ill flash it up right now. Let me know how it goes for you. You…
|
n/a | blissz | January 05, 2018, 09:45:23 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
L3+ support came a bit earlier then expected:https://bitcointalk.org/index.php?t…
|
n/a | blissz | January 05, 2018, 08:05:47 AM |
|
|
|
Antminer L3+ Blissz firmware (05/01 v0.01 first beta) Mining (Altcoins) |
n/a | blissz | January 05, 2018, 08:02:07 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
A bit quiet from my side, but I have been busy on the background and I have some…
|
n/a | blissz | January 03, 2018, 05:37:32 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi,i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)On one…
|
n/a | blissz | January 03, 2018, 01:19:12 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Happy New Year to ya all Best profit and luck ;-)+1 to all d3 owners here! Than…
|
n/a | blissz | January 01, 2018, 03:17:07 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
On that note, blissz, can you confirm that you are redirecting mining pools for…
|
n/a | blissz | January 01, 2018, 03:16:52 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Thx Man! your firmware is AWESOME!!! Working like charm!Still missing some featu…
|
n/a | blissz | December 29, 2017, 09:09:26 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
any idea why this is happening? Doesn't make sense.... It's running fine, but th…
|
n/a | blissz | December 28, 2017, 05:04:56 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi, I don't know if this is a bug, with 2.04 beta,for some reason the frequency…
|
n/a | blissz | December 28, 2017, 02:07:41 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Hi blisszI was following the lowest setting from you with 25% fan. With this set…
|
n/a | blissz | December 24, 2017, 02:25:50 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Blissz, can you tell us, how much is the "lowest" voltage setting? 1? Or how is…
|
n/a | blissz | December 24, 2017, 09:01:26 AM |
|
|
|
Antminer D3 Blissz firmware (2.04 Beta) Mining (Altcoins)
BlisszHere is my logfile.Hope you can use it Thanks, seems like your unit doesn;…
|
n/a | blissz | December 24, 2017, 07:04:26 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
Am I wasting my time tweaking my frequencies to get zero hardware errors?Yes, yo…
|
n/a | blissz | December 23, 2017, 04:46:35 PM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
I am confused.Soft 12/10.Voltage - lowestFreq - 400mhAPW3++Power consumption at…
|
n/a | blissz | December 23, 2017, 10:39:19 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
v2.04 beta :: 22/12 :: test versionDownload:https://mega.nz/#!ulYlTB4D!nEymzPvuj…
|
n/a | blissz | December 23, 2017, 10:12:39 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins) |
n/a | blissz | December 14, 2017, 06:03:25 AM |
|
|
|
Antminer D3 Blissz firmware (10/12 v1.12 update) Mining (Altcoins)
@Blissz Consider using different names for the images in your interface so this…
|
n/a | blissz | December 22, 2017, 12:46:09 PM |
Jump to: