| Content | Score | Started by | Date posted | ||
 |
 |
Fury/Blizzard tuning and mods Mining (Altcoins)
I'm running a few GAW Fury miners from this: supply, 12vdc, 30A, $26.Below was c…
|
n/a | DanZaph | June 22, 2014, 09:05:46 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Fury draws at least 40W+ on an 80+ certified ATX PSU, closer to 50W on these "in…
|
n/a | DanZaph | June 23, 2014, 07:50:33 AM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
1.5.21b1 is up now which mostly just updates bfgminer to the long awaited versio…
|
n/a | DanZaph | May 29, 2014, 03:47:19 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] Hardware
That would seem to be an over current condition. The change of a few degrees sh…
|
n/a | DanZaph | May 26, 2014, 08:47:54 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] Hardware
I too blew [aka melted] a fuse on a unit which had been running perfectly for 3…
|
n/a | DanZaph | May 26, 2014, 08:52:56 PM |
|
|
|
[AUTO SWITCH] ScryptGuild (BTC Guild) Beta Mining (Altcoins)
Scrypt mining in general is becoming less profitable.hence why i am not buying s…
|
n/a | DanZaph | May 18, 2014, 07:42:35 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] Hardware
Just from the traffic on the thread it seems clear interest in the Cube is over.…
|
n/a | DanZaph | May 17, 2014, 06:27:28 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
1.5.20 updated to a final hopeful most stable version and beta versions will res…
|
n/a | DanZaph | May 17, 2014, 05:59:59 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Now for some depressing reading.Jan 5 -Jan 12 0.1 btJan 12 - Jan 22 0.1 btJan 22…
|
n/a | DanZaph | May 11, 2014, 11:02:21 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Danzaph TYVM for all your help. When the PSU comes tmrw i may need some more lo…
|
n/a | DanZaph | May 07, 2014, 09:24:09 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
I'm worried that ASIC will kill scrypt - it was built specifically to be ASIC re…
|
n/a | DanZaph | May 07, 2014, 09:19:10 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
just bought a Corsair Builder Series CX 500 Watt ATX/EPS 80 PLUS (CX500) hope t…
|
n/a | DanZaph | May 07, 2014, 05:02:29 PM |
|
|
|
Putting Adults in Charge at Hashfast Hardware
Having been on both sides of law suits there are a few things to consider. The f…
|
n/a | DanZaph | May 07, 2014, 11:01:36 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Is there a PSU that Bestbuy sells that is affordable and can be used for the cub…
|
n/a | DanZaph | May 07, 2014, 02:37:37 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Yes to all those.You wrote earlier: "A crappy gateway. there are no open molex c…
|
n/a | DanZaph | May 07, 2014, 02:23:52 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
none no lights on cube or psu. But the PSU won't come on unless it's jumped . I…
|
n/a | DanZaph | May 07, 2014, 02:21:11 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Backing up, what are you trying to accomplish? Power an ASIC Cube or something e…
|
n/a | DanZaph | May 07, 2014, 02:16:23 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Ya it definately needs to be jumped. My Comp will not allow me to connect so i…
|
n/a | DanZaph | May 07, 2014, 02:10:55 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I have a psu that has not ATX cable to do the paper clip trick with...It is poss…
|
n/a | DanZaph | May 07, 2014, 02:02:36 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
Not optimistic about the future value of any particular coin then? Scrypt looks…
|
n/a | DanZaph | May 07, 2014, 12:50:55 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
You mean the BFL and the cube? Sad to see the earlier ASICs becoming redundant a…
|
n/a | DanZaph | May 07, 2014, 11:18:22 AM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
The miners that did not work were an ASICMiner V3 Erupter Cube and a BFL Jalapeñ…
|
n/a | DanZaph | May 07, 2014, 05:46:04 AM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
Bad: Neither of my BTC miners work, back to 1.5.18e.What are the BTC miners that…
|
n/a | DanZaph | May 06, 2014, 10:17:59 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
I'm also particularly interested for gridseed users to give the bfgminer include…
|
n/a | DanZaph | May 06, 2014, 06:50:43 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
At the current difficulty and my electric cost of .08/kWh I am below break-even,…
|
n/a | DanZaph | May 06, 2014, 01:11:56 PM |
|
|
|
The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] Mining (Altcoins)
I'm also particularly interested for gridseed users to give the bfgminer include…
|
n/a | DanZaph | May 06, 2014, 08:44:53 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I don't feel comfortable with my IP settings out where everyone can see them. Th…
|
n/a | DanZaph | April 29, 2014, 08:29:48 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Hi everyone... I love bit coining but I am not loving this Block Erupter Cube...…
|
n/a | DanZaph | April 28, 2014, 07:39:40 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I have the latest version cube. I think I may have friend it. When it is plugged…
|
n/a | DanZaph | April 26, 2014, 10:38:07 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Or try http://www.multiminerapp.com/ (MultiMiner) mining software with stratum p…
|
n/a | DanZaph | April 24, 2014, 07:32:12 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
http://www.youtube.com/watch?v=4QwYSp-LTE4i tried this guide but i can't get the…
|
n/a | DanZaph | April 23, 2014, 11:38:24 PM |
|
|
|
CoiningSolutions.com Neptune Poll Group buys
Alright guys, looks like we're going to go with Neptune refunds since KnCminer w…
|
n/a | DanZaph | April 16, 2014, 07:49:30 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I found one of these http://www.newegg.com/Product/Product.aspx?Item=N82E1683511…
|
n/a | DanZaph | April 15, 2014, 08:44:20 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
One of my cubes has shut down - I happened to be sitting right by it and heard t…
|
n/a | DanZaph | April 15, 2014, 06:44:43 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
when i connect the psu turns on only the red one and a green LED remains off eth…
|
n/a | DanZaph | April 13, 2014, 01:00:12 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
The reason they said automotive, is because the fuses are the blade type typical…
|
n/a | DanZaph | April 13, 2014, 05:31:33 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
5 Possibly mining power (relay is engaged)? not, the relay is not triggered, do…
|
n/a | DanZaph | April 13, 2014, 03:57:29 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Interesting fuse info:A couple of days ago I noticed that the fuse was to hot to…
|
n/a | DanZaph | April 13, 2014, 01:45:14 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
fedeeback:5 Possibly mining power (relay is engaged)? not relevant is not fired.…
|
n/a | DanZaph | April 13, 2014, 01:26:36 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Well, I just got the messed up Android issue.By simply not sharing the same subn…
|
n/a | DanZaph | April 12, 2014, 05:06:27 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I am using a CX500 without problems. It has a 12v rail at 34a with 2xPCI-E conne…
|
n/a | DanZaph | April 11, 2014, 07:11:35 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
Would appreciate if people could spend 2 minutes providing feedback on the guide…
|
n/a | DanZaph | April 10, 2014, 11:30:52 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup [now in HD!] Hardware
I would offer a pic of mine, but it's a bit "discoloured" NP, email it to me (em…
|
n/a | DanZaph | April 10, 2014, 10:41:25 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
OP updated with high res images, click through for super super high resolution.R…
|
n/a | DanZaph | April 10, 2014, 09:58:50 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
You guys are aware that cubes cost more to run in electricity than they earn in…
|
n/a | DanZaph | April 10, 2014, 05:08:24 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
The cube doesn't seem to communicate with the proxy? The proxy seems to repeate…
|
n/a | DanZaph | April 10, 2014, 01:57:17 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Yeah thats, where I measured on the fuse.......and it wasn't microvolts...it was…
|
n/a | DanZaph | April 10, 2014, 12:14:48 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Mine has been hashing at ~38GHz for 27d 14h on a $30 30A 12V power supply from A…
|
n/a | DanZaph | April 10, 2014, 12:09:31 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
by probing where the fuse was I mean, the fuse has probing points on the outside…
|
n/a | DanZaph | April 10, 2014, 10:27:11 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I was measuring my Voltage with a digital multimeter at the fuse....was being cu…
|
n/a | DanZaph | April 10, 2014, 08:35:13 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Was moving my cube to a new home tonight, after about a 2 week run period I was…
|
n/a | DanZaph | April 10, 2014, 07:21:33 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
It looks like a poor contact on the fuse in the fuse housing may have been causi…
|
n/a | DanZaph | April 10, 2014, 06:58:57 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
One of my Cubes decided to melt it's fuse and damaged the Start relay in the pro…
|
n/a | DanZaph | April 09, 2014, 10:55:07 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Thats what I always thought, but the amazon page lists it as having 4. Could be…
|
n/a | DanZaph | April 09, 2014, 05:59:52 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Just go with 3x 750s it will save you so much time.Looks great power-wise: Singl…
|
n/a | DanZaph | April 09, 2014, 05:48:50 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
The reason they said automotive, is because the fuses are the blade type typical…
|
n/a | DanZaph | April 08, 2014, 09:31:48 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
but the plug that I have running of 2 4 pin molex those wires are nice and coolW…
|
n/a | DanZaph | April 07, 2014, 10:55:18 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Really short version: The more you can isolate these on the network the happier…
|
n/a | DanZaph | April 05, 2014, 06:42:48 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
2) Yes, physically reverse the fan to reverse airflow direction. I'll clarify th…
|
n/a | DanZaph | April 04, 2014, 09:04:22 PM |
|
|
|
CoiningSolutions.com Neptune Poll Group buys
Was payment sent for the KnCMiner Miner #11 - Neptune BATCH 2?
|
n/a | DanZaph | April 04, 2014, 05:58:55 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
CGminer BAT http://imgur.com/dz5KAIuCGminer Error Screenshot --> http://imgur.co…
|
n/a | DanZaph | April 02, 2014, 12:15:37 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Maybe I was unclear, I know that the addresses resolve correctly, but for my Cub…
|
n/a | DanZaph | April 02, 2014, 11:53:44 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Then, your DNS addresses don't look right.The DNS addresses look good, they look…
|
n/a | DanZaph | April 02, 2014, 11:41:12 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Got any Android wifi devices on the network? Try turning them off.That is so odd…
|
n/a | DanZaph | March 24, 2014, 02:49:50 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
...I accidentaly put a blade in while the machine was running and the blade shut…
|
n/a | DanZaph | March 23, 2014, 01:54:34 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
It could be EMF interference. Build a tinfoil cage or metal mesh like screening…
|
n/a | DanZaph | March 18, 2014, 03:20:18 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I've put this guide on my site and am looking for feedback. Do you prefer the gu…
|
n/a | DanZaph | March 16, 2014, 05:53:49 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I'm really not a fan of these types of PSUs with exposed terminals.Yeah.. I alre…
|
n/a | DanZaph | March 06, 2014, 09:21:13 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I'm really not a fan of these types of PSUs with exposed terminals.Here are some…
|
n/a | DanZaph | March 06, 2014, 07:47:00 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I just received a 12v 30a supply, the same one previously linked to at Amazon: h…
|
n/a | DanZaph | March 05, 2014, 02:01:45 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
QuoteI don't have a solder, is it safe to run it with the copper wire and tape o…
|
n/a | DanZaph | March 04, 2014, 07:05:14 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Relying on you guys to point me in the right direction.Some people have had luck…
|
n/a | DanZaph | March 04, 2014, 12:02:36 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
It stopped working when I set up my second cube on a 850W PSU after adjusting th…
|
n/a | DanZaph | March 04, 2014, 07:14:04 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I have zero faith this $30 PS will hold up.I fear that when it fails it will tak…
|
n/a | DanZaph | March 03, 2014, 12:50:36 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I bet the hippies hate us so much We just turn perfectly good electricity into…
|
n/a | DanZaph | March 02, 2014, 10:47:33 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
The new fan is blowing 3x the warm air out.Its like a little heater.Yep, basical…
|
n/a | DanZaph | March 01, 2014, 06:36:59 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
1. Is there a way to safely power down the cube? Just seems rough to turn off th…
|
n/a | DanZaph | March 01, 2014, 11:37:23 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Some one should try one.Just wired one up, see pics.https://www.dropbox.com/s/65…
|
n/a | DanZaph | March 01, 2014, 08:10:02 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Unfortunately the 'better' PSUs have overload protection that will be triggered…
|
n/a | DanZaph | February 28, 2014, 09:50:38 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
It worked for me and now Cube works without interruptions.But think about other…
|
n/a | DanZaph | February 28, 2014, 10:36:47 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Thanks! No, it's definitely not a power issue, I had it hooked up to a AX1200 an…
|
n/a | DanZaph | February 28, 2014, 11:14:44 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
ok here's some detailed picturesThanks to BillTech for the great photos and rela…
|
n/a | DanZaph | February 27, 2014, 06:54:00 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Do you have any other versions of Python in:/Library/Python/I have other folders…
|
n/a | DanZaph | February 27, 2014, 10:41:40 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I got the same message about Zope.I don't remember how I got past it.I have Zope…
|
n/a | DanZaph | February 26, 2014, 08:57:09 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Here are the steps I followed. 6. Type "sudo python setup.py install" in the…
|
n/a | DanZaph | February 26, 2014, 06:08:21 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I'm on a Mac 10.8.5 using Stratum Proxy.Where did you get the Stratum Proxy or d…
|
n/a | DanZaph | February 26, 2014, 03:18:06 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
The Cube is hashing at ~32GHs on low clock so everything seems to be OK.I'm on a…
|
n/a | DanZaph | February 26, 2014, 10:32:55 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Sounds like cheap PSU. 500W isn't 500W.To bolster what dogie states here are a c…
|
n/a | DanZaph | February 26, 2014, 08:39:29 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
For the past two months I have been mining, without incident, using the stratru…
|
n/a | DanZaph | February 25, 2014, 06:07:41 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Ya think? Congrats dude! Glad you got it working. Like I said you had a ver…
|
n/a | DanZaph | February 24, 2014, 10:53:53 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Note: JLebowskiTheDude is assuming that your router is on the 192.168.0.x networ…
|
n/a | DanZaph | February 24, 2014, 09:04:45 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
The first thing that jumps out is the "+" in the second Pool address, it should…
|
n/a | DanZaph | February 24, 2014, 08:53:40 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
i still cant upload photos for some reasonFrom the thread: How do you upload a p…
|
n/a | DanZaph | February 24, 2014, 04:41:40 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
Anyway I was in contact with seller and they sent me picture which contact of re…
|
n/a | DanZaph | February 24, 2014, 03:58:53 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
have been having an issue getting my cube running for some reason i cannot uplo…
|
n/a | DanZaph | February 24, 2014, 01:08:23 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
... begin to suspect 2 capacitors 220uF which I think they are responsible for 1…
|
n/a | DanZaph | February 23, 2014, 05:47:09 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
I am wondering what some of the status items are in the Cube display, specifical…
|
n/a | DanZaph | February 21, 2014, 09:12:20 AM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
...You've got ONE strand of PCI-E cable trying to power ~300W - that is likely y…
|
n/a | DanZaph | February 22, 2014, 02:51:26 PM |
|
|
|
[Guide] Dogie's Comprehensive ASICMiner Cube Setup Hardware
no Android devices connected to wireless.My Cube mines for a bit, but then stops…
|
n/a | DanZaph | February 22, 2014, 02:08:37 PM |
|
|
|
AT&T UVerse - ASICMiner Cube Solution (same default IP as router) Mining support
I've been trying to reconfig the 2Wire Uverse routerThe manually configured DHCP…
|
n/a | DanZaph | February 22, 2014, 01:13:41 PM |
Jump to: