| Content | Score | Started by | Date posted | ||
 |
 |
[185 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool Pools
3 blocks in 20 hours seems luck remembered we were owed a few2 blocks in 21 hrs…
|
n/a | kano | April 05, 2014, 04:58:07 AM |
|
|
|
Stratum protocol discussion Pools
From a protocol development perspective, stratum being defined in terms of diffi…
|
n/a | kano | April 05, 2014, 01:58:45 AM |
|
|
|
Stratum protocol discussion Pools
BFGMiner (at least) will also send mining.suggest_target("hex target") upon conn…
|
n/a | kano | April 05, 2014, 12:09:30 AM |
|
|
|
Stratum protocol discussion Pools
BFGMiner (at least) will also send mining.suggest_target("hex target") upon conn…
|
n/a | kano | April 05, 2014, 12:04:51 AM |
|
|
|
Stratum protocol discussion Pools
...BFGMiner (at least) will also send mining.suggest_target("hex target") upon c…
|
n/a | kano | April 04, 2014, 10:27:54 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Hmmm - gigavps' image says the PSU is rated at max 996W ... total max 1000W ...h…
|
n/a | kano | April 04, 2014, 09:06:54 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Also everyone, whats your percentage accepted shares by your pool?Please list th…
|
n/a | kano | April 04, 2014, 07:45:31 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
...Okay after someone pointed out my algebra mistakes....the Pools are reading t…
|
n/a | kano | April 04, 2014, 06:33:07 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Discard rate?!?Post the numbers.Discarded in cgminer is pretty much a meaningles…
|
n/a | kano | April 04, 2014, 06:15:22 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Before I head to the gym, here's the quick video of the initial boot with sound…
|
n/a | kano | April 04, 2014, 06:25:51 PM |
|
|
|
[BitFunder] Moving Forward/Resolution Process Securities
Confirming that today I was finally able to get 6.175% of my WeExchange deposit.…
|
n/a | kano | April 04, 2014, 05:56:39 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Has anyone tried the new firmware, yet? Any idea what it's supposed to fix?http…
|
n/a | kano | April 04, 2014, 05:50:02 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
... and if anyone did follow that URL config post above ... I just fixed it The…
|
n/a | kano | April 04, 2014, 04:40:18 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
...anyway to have it give a different clockspeed to different units? most of min…
|
n/a | kano | April 02, 2014, 05:19:58 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
any luck with uploading that image?Official one:https://github.com/AntMiner/AntG…
|
n/a | kano | April 04, 2014, 04:04:00 AM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
any luck with uploading that image?Official one:https://github.com/AntMiner/AntG…
|
n/a | kano | April 04, 2014, 03:41:50 AM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
can someone upload a working backup so i can reflash?I am dumping the SD image r…
|
n/a | kano | April 04, 2014, 02:21:38 AM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
...Where are most of the people located who had their shipments come all banged…
|
n/a | kano | April 04, 2014, 12:49:04 AM |
|
|
|
[185 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool Pools
I know its been a long wait, but now it should only take about one more day to g…
|
n/a | kano | April 03, 2014, 09:17:56 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
I got my S2 today. However, the display does not light up. Although the fans d…
|
n/a | kano | April 03, 2014, 09:02:27 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Since a few people have said 'RPi' ... I'll point out (though it's obvous from t…
|
n/a | kano | April 03, 2014, 08:46:31 PM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
Lastly, rumor has it Bitmain is culling it's S1 inventory and discontinuing S1 p…
|
n/a | kano | April 03, 2014, 06:19:39 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
Well, mine won't connect at 192.168.1.99, and according to an IP scan there's no…
|
n/a | kano | April 03, 2014, 06:09:27 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Does anyone have support and setup for S2? Ip address is not on the computerWron…
|
n/a | kano | April 03, 2014, 05:57:37 PM |
|
|
|
[BitFunder] Moving Forward/Resolution Process Securities
...4-while fixing the bug with bitcoind they discovered a flaw in the protocol w…
|
n/a | kano | April 03, 2014, 05:52:51 PM |
|
|
|
[BitFunder] Moving Forward/Resolution Process Securities
Thanks Ukyo for bringing down Neo&Bee!No, Nee&Bee's problem is that cryptocyprus…
|
n/a | kano | April 03, 2014, 05:20:14 AM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
to me it sounds more like beeing affraid of bitcoin and april 15.What happens on…
|
n/a | kano | April 03, 2014, 05:16:45 AM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
to me it sounds more like beeing affraid of bitcoin and april 15.What happens on…
|
n/a | kano | April 03, 2014, 05:10:49 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
could anybody be so kind and give step by step instruction on how to get 4.2.2 w…
|
n/a | kano | April 03, 2014, 04:31:28 AM |
|
|
|
MtGox withdrawal delays [Gathering] Exchanges
...I don't think so. People still use Silk Road 2.0 even though Silk Road 1.0 bu…
|
n/a | kano | April 02, 2014, 04:30:41 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
Sorry, this isn't a training thread for how to use computers.
|
n/a | kano | April 02, 2014, 04:26:50 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
And ...with my latest 4.2.2a binary, you can do something a little better if you…
|
n/a | kano | April 02, 2014, 07:51:32 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
@Kano, I saw a project called "cgminer LCD Stats" is possible to read the S1 API…
|
n/a | kano | April 02, 2014, 07:20:07 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
...So you are saying that the stats there are only confusing us, and I don't hav…
|
n/a | kano | April 02, 2014, 05:53:43 AM |
|
|
|
MtGox withdrawal delays [Gathering] Exchanges
...I don't think so. People still use Silk Road 2.0 even though Silk Road 1.0 bu…
|
n/a | kano | April 02, 2014, 04:16:46 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
Hi there ,I run a older version of CGMiner (will look later for the Ver. it 2:39…
|
n/a | kano | April 02, 2014, 02:41:03 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
What sort of HW error rate should I be seeing? I have two AntMiners I just got…
|
n/a | kano | April 02, 2014, 12:47:33 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
If the program getting the data source from cgminer is using screen scraping or…
|
n/a | kano | April 02, 2014, 12:34:25 AM |
|
|
|
Josh from BFL is bribing his forum members to leave negative feedback here!!! Meta
...And your a fucking hero member! GTFO or just keep your mouth shut on somethin…
|
n/a | kano | April 01, 2014, 10:00:51 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
...I can't find specs for your first PSU, but the second one has 3 12v rails tha…
|
n/a | kano | April 01, 2014, 09:32:01 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
...The problem now, though, is that the LCD display gives a formatting error - I…
|
n/a | kano | April 01, 2014, 09:27:16 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Just upgraded to the new firmware https://github.com/AntMiner/AntGen1 and I am g…
|
n/a | kano | April 01, 2014, 07:40:58 PM |
|
|
|
AntMiner S2 1TH/s Miner (1w/GH/s) Hardware
OK, anyone got details yet?Someone over in the cgminer thread says they got one…
|
n/a | kano | April 01, 2014, 06:49:59 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
It uses the SPI.This one has Bitmine-A1 chips inside. They show up as BA1 in the…
|
n/a | kano | April 01, 2014, 07:15:56 PM |
|
|
|
Josh from BFL is bribing his forum members to leave negative feedback here!!! Meta
...And your a fucking hero member! GTFO or just keep your mouth shut on somethin…
|
n/a | kano | April 01, 2014, 06:52:58 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
I just got one of the new 1 TH/s rigs from China. The unit is running cgminer 3.…
|
n/a | kano | April 01, 2014, 06:44:01 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
It's official, I'm no longer a KNC customer in waiting. My final refund arrived…
|
n/a | kano | April 01, 2014, 05:51:47 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Just upgraded to the new firmware https://github.com/AntMiner/AntGen1 and I am g…
|
n/a | kano | April 01, 2014, 05:21:34 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.0 Mining software (miners)
...I also now noticed there is a bug in LSTime that was mentioned earlier, the t…
|
n/a | kano | April 01, 2014, 05:04:04 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
My antminer has recently started showing my LSTime as some number around 1396293…
|
n/a | kano | April 01, 2014, 02:49:38 AM |
|
|
|
HashFast announces specs for new ASIC: 400GH/s Hardware
Note to self,When dealing with Bitcoin Hardware Manufacturers and/or Pre-orders…
|
n/a | kano | April 01, 2014, 02:35:01 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
My antminer has recently started showing my LSTime as some number around 1396293…
|
n/a | kano | March 31, 2014, 09:48:50 PM |
|
|
|
[Guide] Dogie's Comprehensive Manufacturer Trustworthiness Guide Hardware
...BlackMiner not added due to their withdrawal from bitcointalk.org.I've no ide…
|
n/a | kano | March 31, 2014, 09:04:47 PM |
|
|
|
[Guide] Dogie's Comprehensive Manufacturer Trustworthiness Guide Hardware
...BlackMiner not added due to their withdrawal from bitcointalk.org.I've no ide…
|
n/a | kano | March 31, 2014, 08:40:30 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
25 * 24 * 60 * 60 * 187 * 10^9 / 2^32 / 5,006,860,589Average expected per day:0.…
|
n/a | kano | March 31, 2014, 07:41:39 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
I don't understand the question. When I typed cgminer -V like you asked, it ret…
|
n/a | kano | March 31, 2014, 07:22:44 PM |
|
|
|
Josh from BFL is bribing his forum members to leave negative feedback here!!! Meta
Looks like Kano is angling for more free hardware vapourware from BFL? Ethically…
|
n/a | kano | March 31, 2014, 07:07:36 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
The Ant OpenWRT binary cgminer-ants1-4.2.2a-7b8fb34 is (as always) described her…
|
n/a | kano | March 31, 2014, 04:56:38 PM |
|
|
|
Josh from BFL is bribing his forum members to leave negative feedback here!!! Meta
The explanation at the link made sense ... and Theymos knows ... so ... what's t…
|
n/a | kano | March 31, 2014, 10:41:26 AM |
|
|
|
Josh from BFL is bribing his forum members to leave negative feedback here!!! Meta
The explanation at the link made sense ... and Theymos knows ... so ... what's t…
|
n/a | kano | March 31, 2014, 10:01:40 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Zero hash rate but pool says alive, lstime says never, have some getwork, some d…
|
n/a | kano | March 31, 2014, 07:40:18 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Zero hash rate but pool says alive, lstime says never, have some getwork, some d…
|
n/a | kano | March 31, 2014, 07:31:47 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
Well ver 4.2.2 resulted in the exact same message. " libusb_failed to load err -…
|
n/a | kano | March 31, 2014, 03:19:03 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Zero hash rate but pool says alive, lstime says never, have some getwork, some d…
|
n/a | kano | March 30, 2014, 11:04:36 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
...And one question: In my driver (from scanwork) i return the number of hashes…
|
n/a | kano | March 30, 2014, 11:01:34 PM |
|
|
|
[Guide] Dogie's Comprehensive Manufacturer Trustworthiness Guide Hardware
And now BFL is buying positive and negative trust ratings in the bitcointalk. Et…
|
n/a | kano | March 30, 2014, 04:13:51 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
after the worker password for the pool can you put commands like -w 256 to set t…
|
n/a | kano | March 30, 2014, 03:40:30 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
Hi all.I've made a full release of linux 4.2.2a/bab binaries in my cgminer-binar…
|
n/a | kano | March 30, 2014, 02:35:29 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
4.2.2 breaks Cgminer Status Summary display on the Avalon Mini, reverted to 4.2.…
|
n/a | kano | March 29, 2014, 03:28:12 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.1 Mining software (miners)
Kano . I tried to follow the instructions to get 4.2 to install on the antminer…
|
n/a | kano | March 29, 2014, 01:05:36 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.2 Mining software (miners)
4.2.2 breaks Cgminer Status Summary display on the Avalon Mini, reverted to 4.2.…
|
n/a | kano | March 29, 2014, 01:04:07 AM |
|
|
|
[BitFunder] Moving Forward/Resolution Process Securities
The Aus company is a owned by the US company. Graet is the director of the Aus c…
|
n/a | kano | March 28, 2014, 05:54:58 AM |
|
|
|
1 TH/s-miner with only 16 GH/s Mining support
It may be a problem with the machines ability to handle low difficulties, causin…
|
n/a | kano | March 28, 2014, 05:49:08 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
...For any version of the ant:Adding --load-balance with a space after the first…
|
n/a | kano | March 28, 2014, 02:22:36 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Kano,Thanks for the super quick response. I'll try it.If the 'internal' change…
|
n/a | kano | March 28, 2014, 05:34:14 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Hi kano any chance to re do the firmware to have control for fans for fan 1 and…
|
n/a | kano | March 28, 2014, 12:19:26 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
I have an Ant that is troubling me. It has a very high number of discarded shar…
|
n/a | kano | March 28, 2014, 12:15:08 AM |
|
|
|
Avalon ASIC users thread Hardware
cgminer -S/dev/ttyUSB0 --avalon2-fan 100 --avalon2-freq 1500 --avalon2-voltage 1…
|
n/a | kano | March 27, 2014, 04:38:27 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Just some random info:One of my 6 antminers is awesome. After 5days 8hrs, runnin…
|
n/a | kano | March 27, 2014, 04:29:46 PM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
...You may want to read the MultiMiner website and the MuM developer's thread he…
|
n/a | kano | March 27, 2014, 04:25:14 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.1 Mining software (miners)
I have 2 bitfury rigs, v2.2 and v1.2, that I am trying to get cgminer running on…
|
n/a | kano | March 27, 2014, 04:19:54 PM |
|
|
|
[440 TH] BitMinter.com [1% PPLNS,Pays TxFees + MergedMining,Stratum,GBT,vardiff] Pools
Luck goes up and down. It's been fairly average lately.Variance has gone up. Tha…
|
n/a | kano | March 27, 2014, 08:32:40 AM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
...You may want to read the MultiMiner website and the MuM developer's thread he…
|
n/a | kano | March 27, 2014, 08:27:36 AM |
|
|
|
1 TH/s-miner with only 16 GH/s Mining support
..In the display and also in webinterface all looks perfect. 1.02 Th and WU 12m…
|
n/a | kano | March 27, 2014, 08:23:52 AM |
|
|
|
1 TH/s-miner with only 16 GH/s Mining support
Well it shouldn't be hard to see where the device is actually mining.A tcpdump o…
|
n/a | kano | March 27, 2014, 08:18:51 AM |
|
|
|
[BitFunder] Moving Forward/Resolution Process Securities
The Aus company is a owned by the US company. Graet is the director of the Aus c…
|
n/a | kano | March 27, 2014, 08:16:01 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
...As I said:QuoteFor any version of the ant:Adding --load-balance with a space…
|
n/a | kano | March 27, 2014, 06:28:43 AM |
|
|
|
1 TH/s-miner with only 16 GH/s Mining support
Hmm, my miner.php there is showing you are mining on Eligius ... which has been…
|
n/a | kano | March 27, 2014, 06:14:48 AM |
|
|
|
Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip Hardware
I could really use some direction on being able to point the S1's I have at a po…
|
n/a | kano | March 27, 2014, 01:17:29 AM |
|
|
|
Linux mining distro for the Raspberry PI - MinePeon Mining software (miners)
I often get sidetracked Remember those LCDs we all got ... well I was wondering…
|
n/a | kano | March 27, 2014, 12:54:13 AM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Hi,I want to monitor my Antminers over the internet! is it possible?for my gpu r…
|
n/a | kano | March 26, 2014, 08:39:55 PM |
|
|
|
[Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner Hardware
Balance Pool StrategyBy default Antminer S1 use Priority as pool mining strategy…
|
n/a | kano | March 26, 2014, 08:34:05 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.1 Mining software (miners)
Well if I disconnect the power and re-connect after 10-15min it runs normally fo…
|
n/a | kano | March 26, 2014, 08:25:40 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.1 Mining software (miners)
Kano just wondering but as I'm getting one of those s1's soon I have to ask if t…
|
n/a | kano | March 26, 2014, 08:22:13 PM |
|
|
|
Neighbourhood Pool Watch 9.18 Gridseed - should you mine bitcoin or litecoin? Pools
If you just bought a Gridseed and were wondering whether or not it might be more…
|
n/a | kano | March 25, 2014, 11:22:46 PM |
|
|
|
Neighbourhood Pool Watch 9.18 Gridseed - should you mine bitcoin or litecoin? Pools
If you just bought a Gridseed and were wondering whether or not it might be more…
|
n/a | kano | March 25, 2014, 11:11:54 PM |
|
|
|
[Pictures][Scrypt ASICS Hardware] Gridseeds LightningASICS by AJ Miles CPU/GPU Bitcoin mining hardware
...They use 100W to mine 10GH/s BTC ... so no one in their right mind would be m…
|
n/a | kano | March 25, 2014, 07:13:12 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.1 Mining software (miners)
Well if I disconnect the power and re-connect after 10-15min it runs normally fo…
|
n/a | kano | March 25, 2014, 03:20:05 PM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.2.0 Mining software (miners)
...Kano, there is an minor "optical bug" in miner status displaying LSTime. It d…
|
n/a | kano | March 25, 2014, 03:06:12 PM |
|
|
|
[Pictures][Scrypt ASICS Hardware] Gridseeds LightningASICS by AJ Miles CPU/GPU Bitcoin mining hardware
...They use 100W to mine 10GH/s BTC ... so no one in their right mind would be m…
|
n/a | kano | March 25, 2014, 08:10:26 AM |
Jump to: