| Content | Score | Started by | Date posted | ||
 |
 |
BFGMiner 3.7.0: modular ASIC/FPGA, GBT, Strtm, RPC, Mac/Lnx/W64, bifury/twinfury Mining software (miners)
Hi Luke-JrSet up and working on my win7x86I had to remove the -G from my bat fil…
|
n/a | Mudbankkeith | November 27, 2013, 02:27:07 PM |
|
|
|
BFGMiner 3.6.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, HBR/KLN Mining software (miners)
Is the hardware broken?Code:BFL 0: 70.0C | 55.13/56.72/33.15Gh/s | A:1691 R:35+1…
|
n/a | Mudbankkeith | November 27, 2013, 10:43:57 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly [Batch 3 open] Hardware
Dead short somewhere on the board. (changed all the cables, 3 different PSU's, f…
|
n/a | Mudbankkeith | November 27, 2013, 09:16:16 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly [Batch 3 open] Hardware
My Chili is dead rest in peace ChiliHashing along steadily for 27 days at 34+ G…
|
n/a | Mudbankkeith | November 27, 2013, 07:50:08 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly [Batch 3 open] Hardware
My Chili is dead rest in peace ChiliHashing along steadily for 27 days at 34+ G…
|
n/a | Mudbankkeith | November 27, 2013, 06:21:41 AM |
|
|
|
Blue Fury Support Thread. Mining support
After running my remaining 12 BFs for some weeks fine with 1.900 to 2.800 GH, I…
|
n/a | Mudbankkeith | November 26, 2013, 06:03:18 PM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
OK good news... Boards found... They were send by mistake to France to one of th…
|
n/a | Mudbankkeith | November 26, 2013, 11:33:12 AM |
|
|
|
Blue Fury Support Thread. Mining support
Failed to initialize (incorrect device?)Plugged in my 2 new Blue Fury's last nig…
|
n/a | Mudbankkeith | November 26, 2013, 09:27:15 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
I have Raspberry Pi B and would like buy Red fury 5 pcs. Is suitable USB 2.0 hub…
|
n/a | Mudbankkeith | November 25, 2013, 03:26:01 PM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
I have Raspberry Pi B and would like buy Red fury 5 pcs. Is suitable USB 2.0 hub…
|
n/a | Mudbankkeith | November 25, 2013, 02:16:18 PM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
OK it is not 100% confirmed jet but it looks like they will pay for rushjob. Not…
|
n/a | Mudbankkeith | November 25, 2013, 02:07:19 PM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
I find too that Lucko managed all well till now - hope that they will find them…
|
n/a | Mudbankkeith | November 23, 2013, 02:30:21 PM |
|
|
|
If you have missing Bitstamp SEPA transfers, post here. Beginners & Help
Has anyone got response to their tickets the last couple of days ?Quote from tic…
|
n/a | Mudbankkeith | November 22, 2013, 01:31:13 PM |
|
|
|
If you have missing Bitstamp SEPA transfers, post here. Beginners & Help
SEPA deposit on 14th november.. with still no balance..Same thing here ...Deposi…
|
n/a | Mudbankkeith | November 22, 2013, 10:09:07 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
Does this look wrong to you guys?BAL 0 looks okBAL 1 looks slow with a lot of er…
|
n/a | Mudbankkeith | November 21, 2013, 04:45:23 AM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
In mail... According to tracking should be hire today...Hi Lucko.Are you still o…
|
n/a | Mudbankkeith | November 20, 2013, 05:33:09 PM |
|
|
|
If you have missing Bitstamp SEPA transfers, post here. Beginners & Help
I am missing a BTC deposit to my Bitstamp address made on the 18th.It was showin…
|
n/a | Mudbankkeith | November 20, 2013, 05:17:14 PM |
|
|
|
RED FURY is SOLD OUT! Computer hardware
RedFury is SOLD OUT in 20 days What comes next?
|
n/a | Mudbankkeith | November 20, 2013, 02:21:53 PM |
|
|
|
If you have missing Bitstamp SEPA transfers, post here. Beginners & Help
I am missing a BTC deposit to my Bitstamp address made on the 18th.It was showin…
|
n/a | Mudbankkeith | November 20, 2013, 11:40:17 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
is there a special pattern in the DLINK DUB-H7 HUB when you use 5 USB Miners?i h…
|
n/a | Mudbankkeith | November 20, 2013, 11:38:05 AM |
|
|
|
If you have missing Bitstamp SEPA transfers, post here. Beginners & Help
I am missing a BTC deposit to my Bitstamp address made on the 18th.It was showin…
|
n/a | Mudbankkeith | November 20, 2013, 11:14:10 AM |
|
|
|
Blue Fury Support Thread. Mining support
PENCIL MOD +. Heatsink removed, swapped for a CPU hsf unit. measured at @ 29deg…
|
n/a | Mudbankkeith | November 20, 2013, 06:51:17 AM |
|
|
|
Blue Fury Support Thread. Mining support
so mine seem to be making a annoying high pitch noise while mining. Its kinda qu…
|
n/a | Mudbankkeith | November 20, 2013, 06:47:49 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
what temp is needed for the board to cool to startup?I have em in my garage the…
|
n/a | Mudbankkeith | November 18, 2013, 05:00:15 PM |
|
|
|
BFGMiner 3.6.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, HBR/KLN Mining software (miners)
Hi so I just set up everything for my Red Fury miner. I'm also relatively new to…
|
n/a | Mudbankkeith | November 18, 2013, 04:19:43 PM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
Yes I'm using that on my Chili As a backplate for AK-968 tomorrow I'm testing i…
|
n/a | Mudbankkeith | November 18, 2013, 03:28:14 PM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
what temp is needed for the board to cool to startup?I have em in my garage the…
|
n/a | Mudbankkeith | November 18, 2013, 02:50:21 PM |
|
|
|
Blue Fury Support Thread. Mining support
With the power limitations from a USB supply, those LED's are a bit big and brig…
|
n/a | Mudbankkeith | November 18, 2013, 07:24:31 AM |
|
|
|
Blue Fury Support Thread. Mining support
Download MinePeon 0.2.4Then do a git pull to update it. 0.2.4.2My 9 Blues and 1…
|
n/a | Mudbankkeith | November 18, 2013, 06:21:13 AM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
Hi LuckoCould those heatsinks be adapted to use as backplates?Drill and tap M3,…
|
n/a | Mudbankkeith | November 18, 2013, 04:22:47 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
The little black squares between the grey inductors and the round can capacitors…
|
n/a | Mudbankkeith | November 17, 2013, 12:44:30 PM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
it is working now and all goodbut i am getting 29.39 ghash is there a way to get…
|
n/a | Mudbankkeith | November 17, 2013, 10:27:32 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
it is working now and all goodbut i am getting 29.39 ghash is there a way to get…
|
n/a | Mudbankkeith | November 17, 2013, 10:05:02 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
it is working now and all goodbut i am getting 29.39 ghash is there a way to get…
|
n/a | Mudbankkeith | November 17, 2013, 06:35:46 AM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
You can order but I will not have parts in time for this batch. You will be proc…
|
n/a | Mudbankkeith | November 17, 2013, 05:12:51 AM |
|
|
|
Blue Fury Support Thread. Mining support
I'm running 14 BF atm, plugged in three 10 port Hubs (5/5/4) and these Hubs are…
|
n/a | Mudbankkeith | November 17, 2013, 04:45:18 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
I'm hoping we see firmware updates soon. Mine are still hashing away nicely but…
|
n/a | Mudbankkeith | November 16, 2013, 09:29:20 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
I managed 42Gh for 10 minsevo 212, with extra 80 mm fan on mosfets.(gets anoth…
|
n/a | Mudbankkeith | November 14, 2013, 06:31:12 PM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
So the boards are in hand and you are just short of one component?Has my SEPA cl…
|
n/a | Mudbankkeith | November 14, 2013, 04:44:14 AM |
|
|
|
Blue Fury Support Thread. Mining support
One of my BF is ony putting out .12ghs. Any idea how to fix. Getting shares from…
|
n/a | Mudbankkeith | November 14, 2013, 04:13:21 AM |
|
|
|
Blue Fury Support Thread. Mining support
QuoteIt's my understanding that the hashrate meter is constantly being revised a…
|
n/a | Mudbankkeith | November 13, 2013, 04:19:37 PM |
|
|
|
Blue Fury Support Thread. Mining support
It also shows how different mining software produces different results and you c…
|
n/a | Mudbankkeith | November 13, 2013, 10:40:55 AM |
|
|
|
Blue Fury Support Thread. Mining support
My Pi is giving an average of 2.33 on MinePeon, with an average of 2.24 at the p…
|
n/a | Mudbankkeith | November 13, 2013, 10:04:20 AM |
|
|
|
Blue Fury Support Thread. Mining support
Thanks we will take that into consideration for the next batch. It is my underst…
|
n/a | Mudbankkeith | November 13, 2013, 09:12:22 AM |
|
|
|
Blue Fury Support Thread. Mining support
My Pi is giving an average of 2.33 on MinePeon, with an average of 2.24 at the p…
|
n/a | Mudbankkeith | November 13, 2013, 09:02:10 AM |
|
|
|
Blue Fury Support Thread. Mining support
People have to do pencil mod tricks to get some decent speeds. (and I'd like to…
|
n/a | Mudbankkeith | November 13, 2013, 07:01:39 AM |
|
|
|
Blue Fury Support Thread. Mining support
Had some fun, Lite n easy delivery today, so I had some dry ice to 'burn' guess…
|
n/a | Mudbankkeith | November 13, 2013, 06:45:02 AM |
|
|
|
Blue Fury Support Thread. Mining support
QuoteIt's my understanding that the hashrate meter is constantly being revised a…
|
n/a | Mudbankkeith | November 13, 2013, 06:08:59 AM |
|
|
|
Blue Fury Support Thread. Mining support
Got one of these to play with between old gear and waiting for new pre-orders to…
|
n/a | Mudbankkeith | November 13, 2013, 04:35:40 AM |
|
|
|
Blue Fury Support Thread. Mining support
Code:cgminer version 3.8.1 - Started: [2013-11-12 21:43:52]---------------------…
|
n/a | Mudbankkeith | November 13, 2013, 03:29:17 AM |
|
|
|
Blue Fury Support Thread. Mining support
I am using bfgminer 3.6 and I have noticed the following with a D-Link 7 port hu…
|
n/a | Mudbankkeith | November 13, 2013, 03:26:04 AM |
|
|
|
BFGMiner 3.6.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, HBR/KLN Mining software (miners)
what should I check next?How to upgrade to a recent version? Good one Helldiver…
|
n/a | Mudbankkeith | November 12, 2013, 06:22:08 PM |
|
|
|
Blue Fury Support Thread. Mining support
AS SOON as I put it into the HUB, my AMU 1 (BE) unit gets continuous HW errors,…
|
n/a | Mudbankkeith | November 12, 2013, 05:05:31 PM |
|
|
|
BFGMiner 3.6.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, HBR/KLN Mining software (miners)
what should I check next?How to upgrade to a recent version? Good one Helldiver…
|
n/a | Mudbankkeith | November 12, 2013, 04:41:56 PM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
2.41Gh = 5 second average2.40Gh = all time average2.37Gh = average pool correct…
|
n/a | Mudbankkeith | November 12, 2013, 04:35:36 PM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
Got my Blue Fury's in today. Setup was easy, had them running within 5 minutes.D…
|
n/a | Mudbankkeith | November 12, 2013, 04:26:08 PM |
|
|
|
Blue Fury Support Thread. Mining support
I had 1 fury working seamlessly with 2 BEs on the same win7 x64 machine, running…
|
n/a | Mudbankkeith | November 12, 2013, 04:10:48 PM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
My Pi is giving an average of 2.33 on MinePeon, with an average of 2.24 at the p…
|
n/a | Mudbankkeith | November 12, 2013, 11:50:11 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
BFGminer 3.5.1 gives hardware errors, switch to the modded BFG 3.2 build and you…
|
n/a | Mudbankkeith | November 12, 2013, 11:35:45 AM |
|
|
|
BFGMiner 3.6.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, HBR/KLN Mining software (miners)
Hi Luke-JrBFGMiner3.6.0 is now up and running with my erupters.I have noticed th…
|
n/a | Mudbankkeith | November 12, 2013, 08:45:37 AM |
|
|
|
Blue Fury Support Thread. Mining support
How about to replace the restistor with an Ω:.85 instead of the pencil mod ?? Wo…
|
n/a | Mudbankkeith | November 12, 2013, 06:41:48 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
I couldn't get more than 1.2 to 1.4 under Linux with latest versions of cgminer…
|
n/a | Mudbankkeith | November 12, 2013, 05:30:29 AM |
|
|
|
Blue Fury Support Thread. Mining support
I wonder if I have a bad unit. I've read through this thread, and I've never see…
|
n/a | Mudbankkeith | November 12, 2013, 05:11:07 AM |
|
|
|
Blue Fury Support Thread. Mining support
I wonder if I have a bad unit. I've read through this thread, and I've never see…
|
n/a | Mudbankkeith | November 11, 2013, 10:13:16 AM |
|
|
|
BFL board project COINTAMINATION - EU facility - ORDERS OPENED for Chili Hardware
From what I learned till now I would say that chip cooling is not that hard. Pow…
|
n/a | Mudbankkeith | November 11, 2013, 04:43:28 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
I've been looking at my returns over the weekend.The BlueFury must be one of the…
|
n/a | Mudbankkeith | November 11, 2013, 06:24:00 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
Which powered usb hub can a RasPi use?USB3 are no good, Pi only lives with USB2D…
|
n/a | Mudbankkeith | November 10, 2013, 08:24:34 AM |
|
|
|
Blue Fury Support Thread. Mining support
Thanks for the info. I tried but the in-circuit resistance stays at 0.97K, no m…
|
n/a | Mudbankkeith | November 10, 2013, 05:34:25 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
cgminer is stopping work because one of the cores is too hot. I find that will h…
|
n/a | Mudbankkeith | November 09, 2013, 03:21:01 PM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
Mine arrived this morning, just got them plugged in. No clue how to get them wo…
|
n/a | Mudbankkeith | November 09, 2013, 02:39:59 PM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
Any idea why I get this every time I start Chili?Quote [2013-11-09 19:11:51] BAL…
|
n/a | Mudbankkeith | November 09, 2013, 02:29:08 PM |
|
|
|
Blue Fury Support Thread. Mining support
Then just use cgminer? The performance is tied to the device, not the software..…
|
n/a | Mudbankkeith | November 09, 2013, 09:41:01 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
Just thinking about the people who are having problems with only getting 1.2Gh /…
|
n/a | Mudbankkeith | November 09, 2013, 09:39:03 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
Has anyone tried replacing the heatsinks on these yet? I have a slightly lower p…
|
n/a | Mudbankkeith | November 09, 2013, 09:24:31 AM |
|
|
|
Blue Fury Support Thread. Mining support
Then just use cgminer? The performance is tied to the device, not the software..…
|
n/a | Mudbankkeith | November 09, 2013, 09:21:54 AM |
|
|
|
Blue Fury Support Thread. Mining support
Win8x64 has never worked with erupters for me. I keep trying every few weeks, it…
|
n/a | Mudbankkeith | November 09, 2013, 08:00:54 AM |
|
|
|
Blue Fury Support Thread. Mining support
re-download, looks like the inf file is corruptTried 4 times still the same thin…
|
n/a | Mudbankkeith | November 09, 2013, 07:29:57 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
Any idea where to buy this beast hub bellow?Time to add an ASICMiner Block Erupe…
|
n/a | Mudbankkeith | November 09, 2013, 07:20:18 AM |
|
|
|
Blue Fury Support Thread. Mining support
re-download, looks like the inf file is corruptTried 4 times still the same thin…
|
n/a | Mudbankkeith | November 09, 2013, 06:59:13 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
letter post here parcel post here The blues must be playing away. They are…
|
n/a | Mudbankkeith | November 08, 2013, 10:35:44 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
I try identify the form factor of the USB connection on the board.Is it mini USB…
|
n/a | Mudbankkeith | November 08, 2013, 11:07:29 AM |
|
|
|
Blue Fury Support Thread. Mining support
My BlueFury arrived today from Outcast3K. Why is the LED blinking in Red? Should…
|
n/a | Mudbankkeith | November 08, 2013, 11:05:13 AM |
|
|
|
BFGMiner 3.5.1: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, KnC/HBR Mining software (miners)
When I remote into my Ubuntu BFG rig the terminal window running BFGminer is not…
|
n/a | Mudbankkeith | November 08, 2013, 09:37:57 AM |
|
|
|
Step by step guide for MinePeon on the Raspberry PI Mining support
how many devises have you successfully run with th pi? When I try to run my setu…
|
n/a | Mudbankkeith | November 08, 2013, 08:19:43 AM |
|
|
|
The Chili – 30+GH/s BFL based Bitcoin Miner Assembly Hardware
To answer the questions.You will need a power supply with a 6 in pcieYou will ne…
|
n/a | Mudbankkeith | November 08, 2013, 08:13:28 AM |
|
|
|
Official ASICMINER Block Erupter Europe|usb 0.045|blade 1.475 - 49 port hub Computer hardware
Let's hope a new usb miner comes out soon, I'd be happy with 100gh/s per stick .…
|
n/a | Mudbankkeith | November 07, 2013, 04:23:51 PM |
|
|
|
Official ASICMINER Block Erupter Europe|usb 0.045|blade 1.475 - 49 port hub Computer hardware
Let's hope a new usb miner comes out soon, I'd be happy with 100gh/s per stick .…
|
n/a | Mudbankkeith | November 07, 2013, 04:14:05 PM |
|
|
|
Blue Fury Support Thread. Mining support
are you going thru a hub? If so find a USB port directly on your tower that's no…
|
n/a | Mudbankkeith | November 07, 2013, 03:53:04 PM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
460 sticks to pack, that's a lot of envelopes to lick that's what Outcast9K is f…
|
n/a | Mudbankkeith | November 07, 2013, 08:31:21 AM |
|
|
|
Blue Fury Support Thread. Mining support
thats what im runningMinePeon VersionMinePeon 0.2.4Miner Versionbfgminer3.4.0sti…
|
n/a | Mudbankkeith | November 07, 2013, 07:35:51 AM |
|
|
|
Blue Fury Support Thread. Mining support
thats what im runningMinePeon VersionMinePeon 0.2.4Miner Versionbfgminer3.4.0sti…
|
n/a | Mudbankkeith | November 07, 2013, 07:16:02 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
any idea if it will be in time to send today?No, i've not been given a delivery…
|
n/a | Mudbankkeith | November 07, 2013, 07:12:25 AM |
|
|
|
[EU/UK GROUP BUY] Blue Fury USB miner 2.2 - 2.7 GH/s Group buys
Just been notified by DHL that they're delivering today \o/I'm glad we are the l…
|
n/a | Mudbankkeith | November 07, 2013, 06:41:10 AM |
|
|
|
Blue Fury Support Thread. Mining support
How would I downgrade to make it work or what is the command for the port? I tri…
|
n/a | Mudbankkeith | November 07, 2013, 06:32:27 AM |
|
|
|
Blue Fury Support Thread. Mining support
#!/bin/bashsleep 10/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer -S BPM:…
|
n/a | Mudbankkeith | November 07, 2013, 05:56:16 AM |
|
|
|
Which USB hub to use with Block Erupters | NanoFury NF1 | BPMC Red Fury? A List. Hardware
my 3x 49 port setupI finally setup 3x 49 port hubs each one has about 40 -42 sti…
|
n/a | Mudbankkeith | November 07, 2013, 05:47:08 AM |
|
|
|
Blue Fury Support Thread. Mining support
I am having problems with my minepoeni can run eruptors fine i have the latest v…
|
n/a | Mudbankkeith | November 07, 2013, 05:21:51 AM |
|
|
|
BFGMiner 3.5.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, KnC/HBR Mining software (miners)
Hi,I haven't been able to get the USB Erupters to work with 3.5.0 (running Win8.…
|
n/a | Mudbankkeith | November 06, 2013, 06:41:44 AM |
|
|
|
BFGMiner 3.5.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, KnC/HBR Mining software (miners)
Hi,I haven't been able to get the USB Erupters to work with 3.5.0 (running Win8.…
|
n/a | Mudbankkeith | November 06, 2013, 04:13:43 AM |
|
|
|
BFGMiner 3.5.0: modular ASIC/FPGA, GBT, Strtm, RPC, Lnx/OpnWrt/PPA/W64, KnC/HBR Mining software (miners)
Hi Luke-JrNot as big as planned? It Big enough!Lots of extras for us to look for…
|
n/a | Mudbankkeith | November 06, 2013, 04:10:30 AM |
Jump to: