| Content | Score | Started by | Date posted | ||
 |
 |
[1TH/s] How much traffic is a Miner with 1TH/s generating in 24 hours Hardware
I run upward of 200TH here (probably closer to 300, but I'm not really sure) for…
|
n/a | NotFuzzyWarm | April 07, 2016, 06:35:31 PM |
|
|
|
[1TH/s] How much traffic is a Miner with 1TH/s generating in 24 hours Hardware
Plus most pools limit average per-miner bandwidth by controlling the difficulty.…
|
n/a | NotFuzzyWarm | April 07, 2016, 06:26:39 PM |
|
|
|
ASIC manufactures ... who is who? Hardware
4) All crypto ASIC suppliers / manufactures are evil.I wouldn't exactly say that…
|
n/a | NotFuzzyWarm | April 07, 2016, 06:03:21 PM |
|
|
|
ASIC manufactures ... who is who? Hardware
One of the problems with the Prisma was a lot of air escaped out the middle of t…
|
n/a | NotFuzzyWarm | April 07, 2016, 05:49:17 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Or just a simple way to make us hesitate in buying the S7/A6 ;-)Stopped me from…
|
n/a | NotFuzzyWarm | April 07, 2016, 12:31:40 PM |
|
|
|
Which Cryptocurruncy can be mined on lappy? Mining (Altcoins)
I doubt it. If there are any, safe bet the laptop better be a top-end one with a…
|
n/a | NotFuzzyWarm | April 06, 2016, 06:53:39 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
So, what's the current state of play then guys?Bitfury have a small number of pr…
|
n/a | NotFuzzyWarm | April 06, 2016, 08:32:13 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
*sigh* looks like bitmain will be our savior again. Unless Bitfury pulls a magi…
|
n/a | NotFuzzyWarm | April 05, 2016, 06:45:26 PM |
|
|
|
Breakout board question for dell titanium psu. Hardware
or make your own heavy cableshttps://i.imgur.com/3RL15ui.jpghttps://i.imgur.com/…
|
n/a | NotFuzzyWarm | April 05, 2016, 07:02:23 PM |
|
|
|
APW3-12-1600 (S7 PSU) -- mining rig Hardware
Sure as long as the GPU's are using 6-pin PCIe connectors. Many cards are using…
|
n/a | NotFuzzyWarm | April 01, 2016, 03:30:17 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
TSMC had probably 0% yield in their 16nm fab (fab 14) after the earthquake early…
|
n/a | NotFuzzyWarm | April 01, 2016, 08:25:38 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Looks only like a very poor photographer's job! crap lighting....My initial thou…
|
n/a | NotFuzzyWarm | April 01, 2016, 08:04:36 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Um, anyone looked closely at the pic with fan removed? https://bitmaintech.com/b…
|
n/a | NotFuzzyWarm | March 31, 2016, 08:39:30 PM |
|
|
|
What is the problem with cheap power supplies? Hardware
Now since you are talking about being used as a space heater, it can also be ext…
|
n/a | NotFuzzyWarm | March 31, 2016, 05:42:13 PM |
|
|
|
What is the problem with cheap power supplies? Hardware
The internal (open frame) supplies I'm talking about are such as http://www.trce…
|
n/a | NotFuzzyWarm | March 31, 2016, 02:57:00 PM |
|
|
|
What is the problem with cheap power supplies? Hardware
At the 200-300w level there are many options for a PSU but 1 question first:Is i…
|
n/a | NotFuzzyWarm | March 31, 2016, 12:25:12 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
I am thinking of an alter ego name for my selfBlowMeBitchesMoronsAllofYou FoolsW…
|
n/a | NotFuzzyWarm | March 30, 2016, 07:40:18 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
lets see their btc sales of gearhttps://blockchain.info/address/1KwA4fS4uVuCNjCt…
|
n/a | NotFuzzyWarm | March 30, 2016, 08:08:22 PM |
|
|
|
[1200 TH] EMC: 0 Fee DGM. Anonymous PPS. US & EU servers. No Registration! Pools
Sorry you guys need to close. Thankyou for all your hard work. shame just need…
|
n/a | NotFuzzyWarm | March 28, 2016, 08:38:53 PM |
|
|
|
[1200 TH] EMC: 0 Fee DGM. Anonymous PPS. US & EU servers. No Registration! Pools
I'm going to miss them. EMC has been my main pool since I 1st started mining in…
|
n/a | NotFuzzyWarm | March 28, 2016, 09:12:22 AM |
|
|
|
Help Me Please. Do I want to know, How do jumper Switching HP DPS-800AB-11A Hardware
Help Me PleaseDo I want to know, How do jumper Switching HP DPS-800AB-11AThank y…
|
n/a | NotFuzzyWarm | March 21, 2016, 06:47:17 PM |
|
|
|
Community Miner Design Discussion Hardware
This is just an amazing project!Can't wait to see/buy the final product.yes I he…
|
n/a | NotFuzzyWarm | March 16, 2016, 09:59:29 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
I'm just going to leave this here....https://www.youtube.com/watch?v=Bk50IuWXg-c…
|
n/a | NotFuzzyWarm | March 14, 2016, 06:04:50 PM |
|
|
|
Community Miner Design Discussion Hardware
Say, got a question. Who's the best domestic quick-turn prototype PCB fab? We've…
|
n/a | NotFuzzyWarm | March 11, 2016, 09:09:18 PM |
|
|
|
Community Miner Design Discussion Hardware
Say, got a question. Who's the best domestic quick-turn prototype PCB fab? We've…
|
n/a | NotFuzzyWarm | March 11, 2016, 02:26:06 PM |
|
|
|
Server Power Supply Interface Board - for standalone miners and GPU rigs Hardware
I didn't put PCIe plugs on my boards because I don't like being limited. A good…
|
n/a | NotFuzzyWarm | March 10, 2016, 04:52:17 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Oh and you should switch to kano.s, it's a much better pool. I have my main hash…
|
n/a | NotFuzzyWarm | March 09, 2016, 06:12:56 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
As I said, my main pool for the next week or more is now Kano so they get a good…
|
n/a | NotFuzzyWarm | March 09, 2016, 07:11:04 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Rather wandering off the thread and getting distracted here though...On yer Bloc…
|
n/a | NotFuzzyWarm | March 09, 2016, 07:14:23 PM |
|
|
|
Community Miner Design Discussion Hardware
Current rating is too low, we require 25A minimum with 30A (for overclockers) as…
|
n/a | NotFuzzyWarm | March 08, 2016, 04:36:25 PM |
|
|
|
pH Miners Launches Powerful Cryptocurrency Miners for Bitcoin Hardware
Found it http://www.gettyimages.se/detail/video/company-team-portrait-in-confere…
|
n/a | NotFuzzyWarm | March 07, 2016, 10:54:52 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
"Shortly"- To occur in many many months.....maybe 2 weeks!LMAO,I forgot about t…
|
n/a | NotFuzzyWarm | March 07, 2016, 09:05:20 PM |
|
|
|
Community Miner Design Discussion Hardware
pcb mount sockets for ATC/ATO blade fuses, good for 30A http://www.digikey.com/p…
|
n/a | NotFuzzyWarm | March 07, 2016, 06:55:52 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I am not surprised with new batch I expected they would. This batch could be op…
|
n/a | NotFuzzyWarm | March 07, 2016, 01:18:35 PM |
|
|
|
Community Miner Design Discussion Hardware
pcb mount sockets for ATC/ATO blade fuses, good for 30A http://www.digikey.com/p…
|
n/a | NotFuzzyWarm | March 07, 2016, 09:38:16 AM |
|
|
|
Community Miner Design Discussion Hardware
I agree fusing is a good idea. Definitely go for automotive blade style vs the c…
|
n/a | NotFuzzyWarm | March 06, 2016, 07:55:51 PM |
|
|
|
Yesminer M20 / M10 Scam Accusations
This is a very grey area.In the Guardian article they say "If you use your debit…
|
n/a | NotFuzzyWarm | March 05, 2016, 12:56:17 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Just a little niggle on "Non boiling fluid provides little convection fluid flow…
|
n/a | NotFuzzyWarm | March 05, 2016, 12:29:02 PM |
|
|
|
Community Miner Design Discussion Hardware
So, after skimming the thread a little... i only have one question to y'all:Why…
|
n/a | NotFuzzyWarm | February 23, 2016, 09:03:22 PM |
|
|
|
pH Miners Launches Powerful Cryptocurrency Miners for Bitcoin Hardware
Is this the first scam effort that is supposedly based in the USA? I am omitting…
|
n/a | NotFuzzyWarm | March 03, 2016, 07:25:00 PM |
|
|
|
pH Miners Launches Powerful Cryptocurrency Miners for Bitcoin Hardware
and gotta love this from their FAQ:Q. Can you mark my order as “gift” at shippin…
|
n/a | NotFuzzyWarm | March 03, 2016, 09:06:40 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
I'd guess material cost is at least $200 for an S7.Currently, it's US$174 for BM…
|
n/a | NotFuzzyWarm | March 01, 2016, 11:17:52 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
His statements are not 100% correct factually as we have not delivered productio…
|
n/a | NotFuzzyWarm | March 01, 2016, 06:44:13 PM |
|
|
|
S7 vs S5 heat Hardware
Can't really say. In one mining area I have 8x s5's running between mid-50's up…
|
n/a | NotFuzzyWarm | March 01, 2016, 08:20:56 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I'm impressed...Aside from the delay caused by CNY, Bitmain replaced my dead s7b…
|
n/a | NotFuzzyWarm | February 29, 2016, 07:21:21 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I put in an order but when I went to pay my bank said the swift number was incom…
|
n/a | NotFuzzyWarm | February 29, 2016, 07:22:28 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Just tossing this rather interesting idea out there for general cogitation.... h…
|
n/a | NotFuzzyWarm | February 29, 2016, 01:32:53 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Bitfury already has a more efficient chip available0.1 j/GH http://bitfury.com/p…
|
n/a | NotFuzzyWarm | February 25, 2016, 08:31:52 PM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
Excuse the noob question, but does the S5 controller need to be extracted from a…
|
n/a | NotFuzzyWarm | February 25, 2016, 08:15:59 PM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
As ya know, I still have more than a few s5's running with 5 hosted by you ... W…
|
n/a | NotFuzzyWarm | February 25, 2016, 06:47:35 PM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
Query: Can a 'real' Beagle be flashed with Bitmains firmware and would it be a d…
|
n/a | NotFuzzyWarm | February 25, 2016, 06:44:12 PM |
|
|
|
Community Miner Design Discussion Hardware
Real records (Vinyl) is still a big business with many current artists releasing…
|
n/a | NotFuzzyWarm | February 24, 2016, 04:45:23 PM |
|
|
|
Community Miner Design Discussion Hardware
You left out the turntables. https://www.google.com/search?q=audiophile+turntabl…
|
n/a | NotFuzzyWarm | February 24, 2016, 01:03:12 PM |
|
|
|
Community Miner Design Discussion Hardware
I've seen TSSOP and QFP with belly pads.Good to learn something new. Makes sense…
|
n/a | NotFuzzyWarm | February 24, 2016, 12:14:43 PM |
|
|
|
Single Red and Black wires w/ connector on BITMAIN's AntMiner APW3-12-1600 PSU Hardware
Since I haven't used the AntMiner PSU before, without adding a switch, the only…
|
n/a | NotFuzzyWarm | February 24, 2016, 10:26:11 AM |
|
|
|
Bitfury Designs released under CC-BY-SA Hardware
Bitstream or GTFO.... Now seriously, on your next 16nm chip you need to do two…
|
n/a | NotFuzzyWarm | February 24, 2016, 09:54:04 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
'Prolly should say that my extreme conservative approach to pcb layout comes fro…
|
n/a | NotFuzzyWarm | February 23, 2016, 08:32:09 PM |
|
|
|
Community Miner Design Discussion Hardware
Unless in the future they get the per-chip power needs below ~1 or 2watts at mos…
|
n/a | NotFuzzyWarm | February 24, 2016, 09:12:50 AM |
|
|
|
Solar array starting to look good. Hardware
I need to find the video of it, but I remember that a university evaluated the d…
|
n/a | NotFuzzyWarm | February 23, 2016, 10:10:36 PM |
|
|
|
2000W Power Breakout Board (DPS2000BB to PC-Ie x12) Hardware
During the summer the area those are in gets up to low 90'sF and all is happy th…
|
n/a | NotFuzzyWarm | February 23, 2016, 08:07:25 PM |
|
|
|
Community Miner Design Discussion Hardware
Speaking of connectors: I was trying to find the list of bands & performers endo…
|
n/a | NotFuzzyWarm | February 23, 2016, 07:59:03 PM |
|
|
|
2000W Power Breakout Board (DPS2000BB to PC-Ie x12) Hardware
I will have to look into the 2980s. If they are that much better, it may be wel…
|
n/a | NotFuzzyWarm | February 23, 2016, 07:46:58 PM |
|
|
|
Community Miner Design Discussion Hardware
Also I was probably a bit grouchy because today is sandwich day but I didn't get…
|
n/a | NotFuzzyWarm | February 23, 2016, 07:34:35 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
'Prolly should say that my extreme conservative approach to pcb layout comes fro…
|
n/a | NotFuzzyWarm | February 23, 2016, 07:23:08 PM |
|
|
|
Community Miner Design Discussion Hardware
Also I was probably a bit grouchy because today is sandwich day but I didn't get…
|
n/a | NotFuzzyWarm | February 23, 2016, 07:03:19 PM |
|
|
|
Community Miner Design Discussion Hardware
1 Firewire cable from the PC feeds first drive, that drive and all other drives…
|
n/a | NotFuzzyWarm | February 23, 2016, 06:20:30 PM |
|
|
|
Single Red and Black wires w/ connector on BITMAIN's AntMiner APW3-12-1600 PSU Hardware
Hello,Newbie here.I'm sorry if this question has been asked and answered, but in…
|
n/a | NotFuzzyWarm | February 23, 2016, 05:12:26 PM |
|
|
|
Community Miner Design Discussion Hardware
Here are Firewire stats from one of our systems that has been running 24x7 for t…
|
n/a | NotFuzzyWarm | February 23, 2016, 04:15:28 PM |
|
|
|
Community Miner Design Discussion Hardware
Funny, because I have exactly the opposite experience. I've never had USB-B prob…
|
n/a | NotFuzzyWarm | February 23, 2016, 04:10:34 PM |
|
|
|
Community Miner Design Discussion Hardware
what about the ability to run them with a nic on each mineror run 1 nic to a swi…
|
n/a | NotFuzzyWarm | February 23, 2016, 04:02:25 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Yes if you see any "snake" type traces its because they are parallel IO traces t…
|
n/a | NotFuzzyWarm | February 22, 2016, 07:18:48 PM |
|
|
|
2000W Power Breakout Board (DPS2000BB to PC-Ie x12) Hardware
I avoided the voltage adjustment based on the issues I've read about with the A6…
|
n/a | NotFuzzyWarm | February 22, 2016, 06:54:35 PM |
|
|
|
2000W Power Breakout Board (DPS2000BB to PC-Ie x12) Hardware
Optim, here ya go: Discussion about the 2kw supply - but curves for the IBM DPS2…
|
n/a | NotFuzzyWarm | February 22, 2016, 01:15:19 PM |
|
|
|
2000W Power Breakout Board (DPS2000BB to PC-Ie x12) Hardware
Well poop! Yer, right, everywhere it's about the 2kw supply - except for the per…
|
n/a | NotFuzzyWarm | February 22, 2016, 02:09:00 PM |
|
|
|
Community Miner Design Discussion Hardware
Only a heap of Avalon 6 chips so far for Kilo's commissioned project.But, folks…
|
n/a | NotFuzzyWarm | February 19, 2016, 07:15:29 PM |
|
|
|
Community Miner Design Discussion Hardware
Nor I for a BTC Community miner. If the failed WASP project teaches anything it…
|
n/a | NotFuzzyWarm | February 18, 2016, 06:35:11 PM |
|
|
|
Miner-boiler heating water vs air miner Hardware
I've mentioned this idea before in other threads: Ever think of selling them to…
|
n/a | NotFuzzyWarm | February 18, 2016, 06:30:34 PM |
|
|
|
Community Miner Design Discussion Hardware
I focused on the pi because I've got some laying around that i'd love to put to…
|
n/a | NotFuzzyWarm | February 19, 2016, 12:10:05 AM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
Not sure if this was posted yet: https://www.bw.com/news/show-65-proclamationLo…
|
n/a | NotFuzzyWarm | February 18, 2016, 09:48:34 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I bought a male stove plug to attach to my cable. I had 25 feet of cable to run…
|
n/a | NotFuzzyWarm | February 18, 2016, 06:41:44 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Software no but I'll see what links to design articles re high-speed design and…
|
n/a | NotFuzzyWarm | February 17, 2016, 10:29:32 PM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
Can anyone verify the power factor on one of these? I'm wondering if the one I t…
|
n/a | NotFuzzyWarm | February 17, 2016, 11:26:15 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Got the notice from Bitmain that my 2x batch 10 miners have shipped. I should ha…
|
n/a | NotFuzzyWarm | February 18, 2016, 09:53:49 AM |
|
|
|
2016 Current/Upcoming Hardware Discussion Hardware
I am hoping that with all of this we will see a little competition making it aff…
|
n/a | NotFuzzyWarm | February 18, 2016, 09:41:10 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
I think it may be a bit more complicate then legos . I cannot say much about boa…
|
n/a | NotFuzzyWarm | February 17, 2016, 08:39:37 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Hm. What are the chip pinouts, protocols, and voltages required to fire it? I ma…
|
n/a | NotFuzzyWarm | February 17, 2016, 01:30:14 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Not quite sure why everyone is surprised that a Manufacturer does not deal with…
|
n/a | NotFuzzyWarm | February 16, 2016, 07:35:34 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Hm. What are the chip pinouts, protocols, and voltages required to fire it? I ma…
|
n/a | NotFuzzyWarm | February 17, 2016, 12:23:46 AM |
|
|
|
Hacking KNC Neptune / Jupiter / Titan miners back to life. Why not? Mining (Altcoins)
Just popped in out of curiosity but level translators are use to translate I/O t…
|
n/a | NotFuzzyWarm | February 16, 2016, 10:31:38 PM |
|
|
|
Hacking KNC Neptune / Jupiter / Titan miners back to life. Why not? Mining (Altcoins)
These dingbats have a picture of it, but no description.http://www.aliexpress.co…
|
n/a | NotFuzzyWarm | February 16, 2016, 09:49:35 PM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
Interesting to see some pictures of the B11 Miner although it does not completel…
|
n/a | NotFuzzyWarm | February 16, 2016, 07:48:53 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Btw bitmaintech is taking money for presales as I do not think they have shipped…
|
n/a | NotFuzzyWarm | February 16, 2016, 12:15:49 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Not quite sure why everyone is surprised that a Manufacturer does not deal with…
|
n/a | NotFuzzyWarm | February 15, 2016, 10:35:43 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Well we had more dealers and resellers, but then manufacturers started selling d…
|
n/a | NotFuzzyWarm | February 15, 2016, 08:42:32 PM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
I honestly haven't read the entire thread - but I just got some cool new toys an…
|
n/a | NotFuzzyWarm | February 15, 2016, 11:20:37 AM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
The 'Standard Tank' bit being banged around prolly came from my mention of IF th…
|
n/a | NotFuzzyWarm | February 14, 2016, 09:35:29 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
^^ The possibility of the package size and same limited coms setup makes for an…
|
n/a | NotFuzzyWarm | February 12, 2016, 10:58:19 PM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
np. Think my first 2 were from late batch 2 or early 3. I was luckily cautious e…
|
n/a | NotFuzzyWarm | February 13, 2016, 12:18:33 AM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
The first 2 I got from Bitmain have 12 PCIe connectors. Also no provision for DC…
|
n/a | NotFuzzyWarm | February 12, 2016, 10:24:55 PM |
|
|
|
Bitfury: "16nm... sales to public start shortly" Hardware
Then it becomes a write-off. Hell, stuffing the DC with 28nm chips could be part…
|
n/a | NotFuzzyWarm | February 12, 2016, 03:03:19 PM |
Jump to: