| Content | Score | Started by | Date posted | ||
 |
 |
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.9.1 Mining software (miners)
Using priv commands is to do with the W/R optionsTo enable remote access priv co…
|
n/a | pekatete | June 04, 2015, 07:18:22 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.9.1 Mining software (miners)
I've updated the AntS1 binary in my binaries git hub of 4.9.1c cgminer including…
|
n/a | pekatete | June 04, 2015, 04:35:32 AM |
|
|
|
What hardware to buy with $500K. Can you get 16NM or 20NM ASICs? Mining speculation
Since you are taliking about dropping $500K, I'd say look at setting up a mining…
|
n/a | pekatete | May 30, 2015, 11:06:50 AM |
|
|
|
Overclocking antminer S5 Hardware
i fit an S3 fan but the temperature rise 10º one blade goes from 52º to 64º the…
|
n/a | pekatete | May 30, 2015, 08:11:12 AM |
|
|
|
Antminer S5 + 3D printied mods Hardware
It does matter if your fin is so thin that it dissipates more than it can conduc…
|
n/a | pekatete | May 30, 2015, 04:16:40 AM |
|
|
|
Bitfury - Mining Lighbulb Hardware
No.1) It won't happenedYes.Still, I don't want one.
|
n/a | pekatete | May 29, 2015, 03:57:54 PM |
|
|
|
Bitfury - Mining Lighbulb Hardware
hmmm ..... would make for a nice distributed transaction confirmation infrastruc…
|
n/a | pekatete | May 29, 2015, 03:10:49 PM |
|
|
|
Antminer S5 + 3D printied mods Hardware
..... Heatsink's leaves tend to get cold further from the solid part and hot onl…
|
n/a | pekatete | May 29, 2015, 02:15:57 PM |
|
|
|
Antminer S5 + 3D printied mods Hardware
I'm thinking here that this is as good a precursory discussion to a complete red…
|
n/a | pekatete | May 29, 2015, 09:42:25 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
I had no qualms at all about voicing my opinion regarding their price gouging on…
|
n/a | pekatete | May 28, 2015, 05:55:22 PM |
|
|
|
Overclocking antminer S5 Hardware
How i do this?"If your PSU can step up the voltage, do it a touch, say 12.5v" My…
|
n/a | pekatete | May 28, 2015, 05:43:08 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
when did sidehack label them. I do not recall that in any of his threads.Well,…
|
n/a | pekatete | May 28, 2015, 05:23:41 PM |
|
|
|
Overclocking antminer S5 Hardware
1. Mind the ambient temp - as it gets warmer so will the rig's ability dissipate…
|
n/a | pekatete | May 28, 2015, 12:01:18 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
..... Bitmain never responded to my last couple emails so I'll have to hit them…
|
n/a | pekatete | May 28, 2015, 11:41:42 AM |
|
|
|
Antminer S5 + 3D printied mods Hardware
Fantastic! Wondrous effort and very well done. I really I'm interested in the pr…
|
n/a | pekatete | May 28, 2015, 09:03:31 AM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
This thing is, on the face of it, a fire hazard! Once we get an independent, for…
|
n/a | pekatete | May 21, 2015, 05:36:41 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
hashboard pinout for s3 not the same as s1)))... s1 workng fine via cp2102.... a…
|
n/a | pekatete | May 19, 2015, 10:49:10 AM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
.... and commenting the same opinion I've already expressed repeatedly based on…
|
n/a | pekatete | May 18, 2015, 04:05:41 PM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
And I can't believe people haven't yet gotten tired of flaming Dogie in every th…
|
n/a | pekatete | May 18, 2015, 03:33:06 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Someone can share solutions for S3 blades to cp2102 or attach 4 boards to the on…
|
n/a | pekatete | May 18, 2015, 10:41:13 AM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
I provided the feature from the specifications, but feel free to report me to th…
|
n/a | pekatete | May 18, 2015, 09:33:28 AM |
|
|
|
BITMAIN AntMiner APW3-12-1600 PSU Series Hardware
So, does this mean that you will only provide support for people using Bitmain(T…
|
n/a | pekatete | May 18, 2015, 06:34:57 AM |
|
|
|
[ANN] Sfards: SF3301 sample chip is available [Updated 04/05/15] Hardware
I am thinking the price of the sample chips reflects, to an extent, the final re…
|
n/a | pekatete | May 04, 2015, 09:43:01 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I haven't ripped down a C1 yet. Started but quit. You use paste on the side to…
|
n/a | pekatete | May 02, 2015, 03:49:07 AM |
|
|
|
[ANN] Sfards: SF3301 Datasheet Open Source [Updated 30/4/15] Hardware
@J4bberwock - is that just a footprint for the chip (or circuitry too)? How many…
|
n/a | pekatete | May 01, 2015, 05:27:24 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Odd. I've been running my two C1's at 243.75/0675,960-985GH/s so they'd last lo…
|
n/a | pekatete | May 01, 2015, 05:18:14 PM |
|
|
|
[ANN] Sfards: SF3301 Datasheet Open Source [Updated 30/4/15] Hardware
@TheRealSteve - take your own advice .... even better, mind your own business.@J…
|
n/a | pekatete | May 01, 2015, 05:09:16 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
Hey Slush, is there anyway to add other SHA 256 coins to the pools? So miners wi…
|
n/a | pekatete | May 01, 2015, 02:45:58 PM |
|
|
|
[ANN] Sfards: SF3301 Datasheet Open Source [Updated 30/4/15] Hardware
I am surprised also by the comment about the cost of such a DC2DC gadget. It see…
|
n/a | pekatete | May 01, 2015, 07:01:50 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Some news from Kano stirring about the S1/S2/S3 on the cgminer end ...... someth…
|
n/a | pekatete | April 25, 2015, 12:10:55 PM |
|
|
|
AntMiner S4+ available for global sales on April 20th, shipping within one week Hardware
Price PSU Shipping $ Total Watts Gh/s S5(2) 680 60 86 826 1…
|
n/a | pekatete | April 20, 2015, 02:03:10 PM |
|
|
|
AntMiner S4+ available for global sales on April 20th, shipping within one week Hardware
Once again we don't need more miners or even better miners. We need higher btc…
|
n/a | pekatete | April 20, 2015, 11:42:01 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I don't have spare blades, so i've can't test this setup. And this is for s5 not…
|
n/a | pekatete | April 20, 2015, 11:22:54 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
AFAIK there is no working solution to running S5 off SD card. There are instruct…
|
n/a | pekatete | April 20, 2015, 07:23:08 AM |
|
|
|
Antminer S3 batch 6 overclocking Mining support
Still running your S3's Pek?Yep, still running them ...OC'ing them?Or underclock…
|
n/a | pekatete | April 20, 2015, 06:34:39 AM |
|
|
|
Antminer S3 batch 6 overclocking Mining support
Still running your S3's Pek?Yep, still running them ...
|
n/a | pekatete | April 18, 2015, 08:00:38 AM |
|
|
|
[ANN] Sfards: SF3301 Specifications Revealed [Updated 14/4/15] Hardware
We’d like to reiterate that our ASIC’s development board design and its software…
|
n/a | pekatete | April 15, 2015, 08:44:27 AM |
|
|
|
[ANN] Sfards: SF3301 Specifications Revealed [Updated 14/4/15] Hardware
Dogie, I think it's high time you'll put a disclaimer about your BitmainTech aff…
|
n/a | pekatete | April 14, 2015, 04:02:26 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I stand corrected. I picked up my Dell N750P-S0 today and it clearly states12VD…
|
n/a | pekatete | April 11, 2015, 07:42:42 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
When i mine with slush's pool it always says my best share is zero is their anyw…
|
n/a | pekatete | April 11, 2015, 07:36:46 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
So, the z750 supplies work under heavy load. Typically a computer supply will c…
|
n/a | pekatete | April 08, 2015, 11:20:52 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
So, the z750 supplies work under heavy load. Typically a computer supply will c…
|
n/a | pekatete | April 08, 2015, 10:41:14 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Fan mod 1. Thermalright 130CFM pull - fan is PWM but run with blue wire hack, ak…
|
n/a | pekatete | April 04, 2015, 07:57:27 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
wow awesome freq with very low tempsho much power to do it?I use 2 550W Dell ser…
|
n/a | pekatete | April 04, 2015, 06:28:52 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
wow awesome freq with very low tempsho much power to do it?I use 2 550W Dell ser…
|
n/a | pekatete | April 04, 2015, 06:03:38 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Fan mod 1. Thermalright 130CFM pull - fan is PWM but run with blue wire hack, ak…
|
n/a | pekatete | April 04, 2015, 05:35:42 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Interesting. Batch Five is now sold out.Nope, batch 5 is now / still available .…
|
n/a | pekatete | April 04, 2015, 01:33:51 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Ugh. Nevermind. Like talking to a stone wall. I'll be the mature one and move on…
|
n/a | pekatete | April 04, 2015, 10:30:44 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
It 'has to do with me' when you attacked me for no reason. If you don't like wha…
|
n/a | pekatete | April 04, 2015, 10:08:38 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Ofcourse, you need tools (that's a no-brainer) ... a dremel would be a good star…
|
n/a | pekatete | April 04, 2015, 07:01:07 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
.... I wish a company made a copper option with heatpipes, could make a huge di…
|
n/a | pekatete | April 03, 2015, 06:24:11 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
.... I wish a company made a copper option with heatpipes, could make a huge di…
|
n/a | pekatete | April 03, 2015, 10:30:09 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
.... I wish a company made a copper option with heatpipes, could make a huge di…
|
n/a | pekatete | April 03, 2015, 09:33:24 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Damn... Shipping cost for 1 S5 (to Russia) via EMS became129.613 USD.Who is craz…
|
n/a | pekatete | April 03, 2015, 05:37:32 AM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
So... Chance and luck are different things?Of course! The word "chance" has gam…
|
n/a | pekatete | April 02, 2015, 02:46:46 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
So... Chance and luck are different things?Of course! The word "chance" has gam…
|
n/a | pekatete | April 02, 2015, 12:49:57 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
@Pekatete,if your purcahse was within the last 90-days, please e-mail support@bi…
|
n/a | pekatete | April 01, 2015, 09:00:19 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
@pekatete,dead fan, we do offer replacement. The fans used on Antminer is not a…
|
n/a | pekatete | April 01, 2015, 08:36:02 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Thank you for the stats!!52 is a bit warm but it is well in the range.Not sure y…
|
n/a | pekatete | April 01, 2015, 07:48:59 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
So no cares? Everyone here just talking about fans. I think they are missing the…
|
n/a | pekatete | April 01, 2015, 07:08:05 PM |
|
|
|
Trying to get involved... Mining speculation
To get involved or not involved.Give me your number ... I'll call you, maybe!One…
|
n/a | pekatete | April 01, 2015, 06:09:20 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
What is the fan model on the S3. Have to remember there are lots of people out h…
|
n/a | pekatete | April 01, 2015, 03:22:49 PM |
|
|
|
ANTMINER S2 upgrade kit? EDIT: New info 3/11 Hardware
Why are you still talking about it. Same reason you are talking about it really…
|
n/a | pekatete | April 01, 2015, 02:24:18 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Just three fans available and mentioned, with the cheapest being the thermalrigh…
|
n/a | pekatete | April 01, 2015, 01:15:15 PM |
|
|
|
ANTMINER S2 upgrade kit? EDIT: New info 3/11 Hardware
Currently china is in the famous Sand Storm Seasons. ....I also do not believe…
|
n/a | pekatete | April 01, 2015, 01:24:30 PM |
|
|
|
ANTMINER S2 upgrade kit? EDIT: New info 3/11 Hardware
Umisoo.com sent out some e-mail notifications to the customers their miners are…
|
n/a | pekatete | April 01, 2015, 10:27:45 AM |
|
|
|
ANTMINER S2 upgrade kit? EDIT: New info 3/11 Hardware
Hi Guys,How big is the chance that the Antminer S2 upgrade set will be using the…
|
n/a | pekatete | March 31, 2015, 03:33:32 PM |
|
|
|
ANTMINER S2 upgrade kit? EDIT: New info 3/11 Hardware
Hi Guys,How big is the chance that the Antminer S2 upgrade set will be using the…
|
n/a | pekatete | March 31, 2015, 02:07:17 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
^^^ enough from me said on that .... we'll have to agree to disagree as I believ…
|
n/a | pekatete | March 31, 2015, 01:53:52 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
The repasting suggestion appeared fairly early. It was almost described as some…
|
n/a | pekatete | March 31, 2015, 01:09:55 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
^^^ I don't think there's more to add to that ..... I don't have a malfunctionin…
|
n/a | pekatete | March 31, 2015, 12:27:17 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
^^^ I don't think there's more to add to that ..... I don't have a malfunctionin…
|
n/a | pekatete | March 31, 2015, 12:08:29 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Yes but I'm a retired technician and one does what one does.Just my thinking thi…
|
n/a | pekatete | March 31, 2015, 10:46:38 AM |
|
|
|
2 AVA4.1s Won! [2200 TH] CKPool (kano.is) from the cgminer devs [0.9% PPLNS] Pools
What does the 'Network' time counter mean?That is the elapsed time since the net…
|
n/a | pekatete | March 30, 2015, 06:53:10 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Yes but I'm a retired technician and one does what one does.Just my thinking thi…
|
n/a | pekatete | March 30, 2015, 06:01:53 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
Pool luck is just that and, theoretically, not influenced by hash speeds / rates…
|
n/a | pekatete | March 30, 2015, 03:23:51 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
I know th theory is "luck" evens out over the long term, but I am begining to be…
|
n/a | pekatete | March 30, 2015, 03:08:20 PM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
Most of them balance out similar in the end.Like the three blocks found in an ho…
|
n/a | pekatete | March 30, 2015, 12:47:35 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Seeing the C1 may be out of fashion, anyone have any unused, valid C1 vouchers f…
|
n/a | pekatete | March 30, 2015, 10:30:28 AM |
|
|
|
[ANN] Sfards: SF3301 Tapeout Complete [Updated 10/3/15] Hardware
How can you determine that without knowing the specifications of scypt mode only…
|
n/a | pekatete | March 30, 2015, 09:36:23 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
Semantic arguments and opinionated browbeating ..... !? You've comprehensively d…
|
n/a | pekatete | March 27, 2015, 11:12:58 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
Yep, I'm pretty firmly entrenched in the opinion that helping people is a good t…
|
n/a | pekatete | March 27, 2015, 10:37:58 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
You are set in your ways so I'd say a self moderated thread is the way for you t…
|
n/a | pekatete | March 27, 2015, 09:56:27 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
If I call you out on what appears to be a boneheaded comment and it seems unfair…
|
n/a | pekatete | March 27, 2015, 09:29:34 PM |
|
|
|
2 AVA4.1s Won! [2200 TH] CKPool (kano.is) from the cgminer devs [0.9% PPLNS] Pools
Gotcha.Shifts are supposed to be ~50 minutes long. Kano did a really nice detai…
|
n/a | pekatete | March 27, 2015, 04:54:50 PM |
|
|
|
Server Power Supply Interface Board - for standalone miners and GPU rigs Hardware
So where can I get one for this:http://m.ebay.com/itm/311075940517?nav=SEARCHTha…
|
n/a | pekatete | March 26, 2015, 10:01:11 AM |
|
|
|
2 AVA4.1s Won! [4400 TH] CKPool (kano.is) from the cgminer devs [0.9% PPLNS] Pools
Just had a short network outage.It was an upstream router for 60-90sMany miners…
|
n/a | pekatete | March 25, 2015, 03:32:05 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
Yeah, funny you should mention... My contact at Bitmain hasn't gotten me any goo…
|
n/a | pekatete | March 24, 2015, 08:02:37 AM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
I found out that by logging with ssh and runningCode:curl http://username:passwo…
|
n/a | pekatete | March 21, 2015, 11:35:21 AM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
Ok done these steps on my Ubuntu VM, what would be the next step after ""make de…
|
n/a | pekatete | March 21, 2015, 09:19:15 AM |
|
|
|
[9000 TH] Slush's Pool (mining.bitcoin.cz); TX FEES + VarDiff Pools
Today I was standing up some new miners, and went in to create a unique worker f…
|
n/a | pekatete | March 20, 2015, 08:16:51 PM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
That's what I'm looking for, to install no-ip on the SPxx itself. It would be an…
|
n/a | pekatete | March 19, 2015, 02:51:27 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Anyone with S5 coupons they'd want off their hands? PM please.... or send to bit…
|
n/a | pekatete | March 19, 2015, 11:40:03 AM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
Anyone know how to install no-ip (or some other free ddns service) on a SPxx for…
|
n/a | pekatete | March 19, 2015, 11:36:34 AM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
Anyone know how to install no-ip (or some other free ddns service) on a SPxx for…
|
n/a | pekatete | March 19, 2015, 06:37:44 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
340usd per unit? https://www.bitmaintech.com/productDetail.htm?pid=0002015030309…
|
n/a | pekatete | March 19, 2015, 06:24:36 AM |
|
|
|
2 AVA4.1s Won! [4400 TH] CKPool (kano.is) from the cgminer devs [0.9% PPLNS] Pools
Was that back to back restarts? I've been thrown off again ..... after being bac…
|
n/a | pekatete | March 17, 2015, 07:37:41 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Gun stores provide Guns and ammo. Does that mean that I should start shooting up…
|
n/a | pekatete | March 17, 2015, 03:45:21 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
This may have been covered somewhere in this thread, but it is the first time I'…
|
n/a | pekatete | March 17, 2015, 10:37:42 AM |
|
|
|
2 AVA4.1s Won! [4400 TH] CKPool (kano.is) from the cgminer devs [0.9% PPLNS] Pools
Shift graphs .... I think the default should be Zero based ..... now that the op…
|
n/a | pekatete | March 17, 2015, 10:31:53 AM |
Jump to: