| Content | Score | Started by | Date posted | ||
 |
 |
antminer s3 help Mining support
Have a read of this guide.https://bitcointalk.org/index.php?topic=702653In parti…
|
n/a | RichBC | October 17, 2015, 09:43:18 AM |
|
|
|
Antminer S5 blade Step down voltage chip --Help need it Hardware
I'd place my bids on TPS61170 as compatible.I didn't check the pinout against wh…
|
n/a | RichBC | October 17, 2015, 09:36:19 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
I've been working on trying to calculate the reg_data for BM1382/4 on demand, an…
|
n/a | RichBC | October 17, 2015, 08:19:06 AM |
|
|
|
Would i be better off waiting for the 16nm miners? Mining speculation
Also, why you metioned Innosilicon? I haven't hear about them for really a long…
|
n/a | RichBC | October 17, 2015, 03:09:01 AM |
|
|
|
bathroom floor heating trough watercooled miners Hardware
I think it's a great idea, always seems such a pity that "Miner Heat" is treated…
|
n/a | RichBC | October 17, 2015, 02:59:43 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
Did anyone ever get an R1 shipped from ITOP?Bitmain shipped out the R1 units pre…
|
n/a | RichBC | October 16, 2015, 10:38:11 AM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
My power supply showed up and I've been playing with it a bit. Shit, you weren't…
|
n/a | RichBC | October 16, 2015, 02:10:04 AM |
|
|
|
Antminer S2 Underclock Mining support
Nice job, you just need to do the S3 now. Here's what I managed to get my S3 to…
|
n/a | RichBC | October 15, 2015, 05:58:49 AM |
|
|
|
Antminer S2 Underclock Mining support
At 0.76V 225MHzRich
|
n/a | RichBC | October 14, 2015, 05:54:15 PM |
|
|
|
Antminer S2 Underclock Mining support
Just looking back at my S1 notes my best results were at 0.76V. Remember that th…
|
n/a | RichBC | October 14, 2015, 05:50:10 PM |
|
|
|
Antminer S2 Underclock Mining support
Well done on finding the resistors. In some ways it's quite simple... If the vol…
|
n/a | RichBC | October 14, 2015, 04:42:21 PM |
|
|
|
Ready to Rock and Roll Mining support
Matt what have you been doing while waiting for the S5 to arrive? First port o…
|
n/a | RichBC | October 14, 2015, 04:36:06 PM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
Yes it's a great pity that you cannot adjust the frequency on the fly. One thing…
|
n/a | RichBC | October 14, 2015, 04:28:53 PM |
|
|
|
How good is 10TH/s? Mining speculation
I would highly recommend you mine in a pool. Even though 10 TH/s is a pretty goo…
|
n/a | RichBC | October 14, 2015, 08:31:46 AM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
Yes a guy had just installed a 4MW Farm and was selling off some panels that had…
|
n/a | RichBC | October 14, 2015, 01:07:51 AM |
|
|
|
Just getting into the game Mining support
Thank you for this information! Would I connect it to the PSU or a port on the S…
|
n/a | RichBC | October 13, 2015, 02:52:04 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Multiply by 0.71 or divide by 1.41http://www.trans-tronic.co.uk/rectifier/?circ…
|
n/a | RichBC | October 13, 2015, 02:38:36 PM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
From what i understand batteries are expensive and they have a short lifetime? M…
|
n/a | RichBC | October 13, 2015, 02:31:10 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I would regard this as purely hypothetical. It could be made to work but you wou…
|
n/a | RichBC | October 13, 2015, 01:58:36 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Rectified & smothed 120v AC is 93v DCHmm not sure what rectifier you are using…
|
n/a | RichBC | October 13, 2015, 01:11:36 PM |
|
|
|
S7 OVERCLOCK Hardware
I'm not sure i"m gonna do it but i'd like to know how I can OVERCLOCK to the max…
|
n/a | RichBC | October 13, 2015, 11:08:40 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
"String" or "Module" refers to the way the Chips are powered. Might be better to…
|
n/a | RichBC | October 13, 2015, 10:51:06 AM |
|
|
|
Antminer S2 Underclock Mining support
Not sure if the S2 has been done, but a lot of people have done the "Pencil Mod"…
|
n/a | RichBC | October 13, 2015, 08:15:54 AM |
|
|
|
Undervolt S3 line voltage with variac. What would happen? Mining support
As you suspect it's not going to work... First off it's the PSU that would be pl…
|
n/a | RichBC | October 13, 2015, 08:10:04 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Well at least they have admitted it's not shipped.....
|
n/a | RichBC | October 13, 2015, 03:41:39 AM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
Yes a nice result. For me with my 15c electricity some form of undervolting is e…
|
n/a | RichBC | October 13, 2015, 01:31:17 AM |
|
|
|
Need S5 and S4 and S3 Hashboards Schematics Hardware
Antminer S1 schematics are available.https://github.com/AntMiner/AntGen1/tree/ma…
|
n/a | RichBC | October 12, 2015, 04:38:02 PM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
Electricity fee：0.5 CNYIs this USD or CNY? At usd that is lowest going still on…
|
n/a | RichBC | October 12, 2015, 04:18:18 PM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
I was initially sceptical about the Bucs when Phil mentioned them, however i hav…
|
n/a | RichBC | October 12, 2015, 03:55:29 PM |
|
|
|
Antminer S5 - Underclock - Undervolt - Best J/GH Mining support
Looks to be a nice supply, will be interested to hear how you get on? I have bee…
|
n/a | RichBC | October 12, 2015, 03:43:50 PM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
It's a pre-order for Cloud Mining on the B-Eleven, priced at 0.76BTC/T, now 0.78…
|
n/a | RichBC | October 12, 2015, 03:30:45 PM |
|
|
|
Antminer S5+ Only One Batch Mining speculation
Best guess would be that it was to clear stocks of the BM1384 chip ahead of the…
|
n/a | RichBC | October 12, 2015, 02:25:04 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Yes agreed, even my Antrouter R1 was marked as.Carrier Tracking No. Date 2…
|
n/a | RichBC | October 12, 2015, 01:35:34 PM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
If you or anyone else has one they can power up can they PM me? I'll give you fi…
|
n/a | RichBC | October 12, 2015, 01:19:29 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Like it or not they have been very clear on the PSU spec from the start, althoug…
|
n/a | RichBC | October 12, 2015, 12:20:17 PM |
|
|
|
My Bitmaintech s-7 underpreforms at freq 600 + freq 550 , not freq 500 (Fixed!) Hardware
OK well that simplifies things. So the board with the < 12V was that measured…
|
n/a | RichBC | October 12, 2015, 11:50:28 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Like it or not they have been very clear on the PSU spec from the start, althoug…
|
n/a | RichBC | October 12, 2015, 11:44:02 AM |
|
|
|
My Bitmaintech s-7 underpreforms at freq 600 + freq 550 , not freq 500 (Fixed!) Hardware
Question bradli? When the miner is fully plugged up what is your PSU configurati…
|
n/a | RichBC | October 12, 2015, 10:52:34 AM |
|
|
|
My Bitmaintech s-7 underpreforms at freq 600 + freq 550 , not freq 500 (Fixed!) Hardware
Is that measurement of 12.08V made with the S7 Hashing, and what about the other…
|
n/a | RichBC | October 12, 2015, 09:09:59 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
I can tell you when I managed to get my shit numbers my pcie cords measure 11.6…
|
n/a | RichBC | October 12, 2015, 02:44:56 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
Yes me too, looks like they are rolling... Rich
|
n/a | RichBC | October 12, 2015, 02:37:02 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
"String" or "Module" refers to the way the Chips are powered. Might be better to…
|
n/a | RichBC | October 12, 2015, 02:18:19 AM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
It would appear that the chips (probably Innosilicon A3) used in it are not "fu…
|
n/a | RichBC | October 12, 2015, 01:58:41 AM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
My assumptions are just gleaned from what I have read on the Net & Forum, no fir…
|
n/a | RichBC | October 11, 2015, 02:29:51 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
if you don't plug all 3 plugs per board, you void your warranty. I have no idea…
|
n/a | RichBC | October 11, 2015, 02:20:41 PM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
My understanding is Miner design is LK Group, chips assumed to be InnoSilicon? B…
|
n/a | RichBC | October 11, 2015, 02:14:27 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
That's a Yes and Yes. Rich
|
n/a | RichBC | October 11, 2015, 02:02:44 PM |
|
|
|
B-Eleven sha-256 ASIC miner Hardware
100% SCAM....after KnC, Butterfly labs and etc. who the fuck will purchase a min…
|
n/a | RichBC | October 11, 2015, 01:55:25 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
So long as your antenna is from a 2.4GHz device (most will be) then yes you just…
|
n/a | RichBC | October 11, 2015, 01:47:06 PM |
|
|
|
Antminer S5 blade Step down voltage chip --Help need it Hardware
I do not know the part number of the chip, however it's a DC-DC step up converte…
|
n/a | RichBC | October 11, 2015, 01:45:16 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
There is wireless capability however you need to add a pigtail & antenna.http://…
|
n/a | RichBC | October 11, 2015, 01:10:56 PM |
|
|
|
S3+ (BM1382) Overclocking with voltage setting Mining support
Thanks for the reply. Yes agreed this is all old stuff... It was just when on my…
|
n/a | RichBC | October 10, 2015, 04:47:27 PM |
|
|
|
Diff thread Oct 1 to Oct 14 picks are Closed. 2x bonus! + a surprise? Mining speculation
Seriously I am interpreting all this and what I get is Bitfury KNC SP-Tech have…
|
n/a | RichBC | October 09, 2015, 03:28:22 PM |
|
|
|
[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs Hardware
Even if by strange happenstance one was forced to use mining controller with a h…
|
n/a | RichBC | October 09, 2015, 01:22:28 PM |
|
|
|
Antminer s5 not expected Hashrate Mining support
Need new glasses on the x & 0 However the x seem to have reduced with the lowe…
|
n/a | RichBC | October 09, 2015, 12:02:04 PM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
If you're shipping from China you can definitely ship it cheaper, why is this no…
|
n/a | RichBC | October 09, 2015, 10:22:45 AM |
|
|
|
Antminer s5 not expected Hashrate Mining support
The row of zeros on the status screen indicates that it has not found any of the…
|
n/a | RichBC | October 09, 2015, 10:15:29 AM |
|
|
|
Antminer s5 not expected Hashrate Mining support
Sounds like one board has stopped hashing. Have you done a reboot? If that fails…
|
n/a | RichBC | October 08, 2015, 05:33:06 PM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
This is a great project, would be so nice to see some recycling, and as I have a…
|
n/a | RichBC | October 08, 2015, 04:59:58 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I am going to keep working on my boards and will probably get there in the end.…
|
n/a | RichBC | October 08, 2015, 03:47:09 PM |
|
|
|
How many time until get back my investment? Mining speculation
Hummm... Tell me real examples of these minimum withdrawal limits, please (the l…
|
n/a | RichBC | October 08, 2015, 09:35:52 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
On the back of the router it is two pin chinese plug , It will comes with plug a…
|
n/a | RichBC | October 08, 2015, 07:59:33 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Yes that board looks ok, however dependant on how it failed you it may not have…
|
n/a | RichBC | October 08, 2015, 07:52:59 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
OK I have reordered the measurements to represent how they are connected on the…
|
n/a | RichBC | October 08, 2015, 04:40:46 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
OK so the indutor has shifted but must still be soldered to the pads. Also worth…
|
n/a | RichBC | October 08, 2015, 04:09:08 AM |
|
|
|
BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll Hardware
The "Trouble" with the S5 is the chain voltage supply. It is both it's greatest…
|
n/a | RichBC | October 08, 2015, 03:52:26 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
The reason you cannot see L1 is because the way the inductor has moved is to cov…
|
n/a | RichBC | October 08, 2015, 03:44:09 AM |
|
|
|
Is mining dead ? Mining speculation
Hi, when I got into bitcoins, people around me already told me mining is dead. B…
|
n/a | RichBC | October 08, 2015, 03:38:19 AM |
|
|
|
The quest for the Antminer S5 Ribbon Data cable. Mining support
Since this thread is already here, I might as well use it. Today I resurrected a…
|
n/a | RichBC | October 08, 2015, 03:12:28 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Thanks for posting that I did not know of that revision. I was thinking somethi…
|
n/a | RichBC | October 08, 2015, 02:31:55 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
I just checked it and it looks like you're right the free shipping is gone, wond…
|
n/a | RichBC | October 08, 2015, 02:02:15 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I think you are right I wish we had the story behind it. As far as I know it's…
|
n/a | RichBC | October 08, 2015, 01:45:54 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
You will find that it's only free postage if you order a single unit, but a grea…
|
n/a | RichBC | October 07, 2015, 04:01:20 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I would definitely do it with the heatsink off, just much less mass to heat so l…
|
n/a | RichBC | October 07, 2015, 03:02:45 PM |
|
|
|
"Modern" home mining hardware? Mining speculation
I suggest the Lketc Mintforger Dragon 1 Th/s (1000 Gh/s) Sha-256 Asic 28nm Bitco…
|
n/a | RichBC | October 07, 2015, 02:12:36 AM |
|
|
|
Antminer R1 Hardware
Im pretty sure if they clocked it higher that would be bad end result with no fa…
|
n/a | RichBC | October 06, 2015, 03:10:51 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
600MHz is the maximum frequency?I have one cold place, where is always between 0…
|
n/a | RichBC | October 06, 2015, 12:50:07 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
So a strong correlation between the Hash Rate & the Error Rate, but seems to be…
|
n/a | RichBC | October 06, 2015, 10:01:14 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
That is very annoying. Are you sure you are giving the Miner long enough for the…
|
n/a | RichBC | October 06, 2015, 08:16:12 AM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Do we know what the result is if you power the controller before the hash boards…
|
n/a | RichBC | October 05, 2015, 03:20:13 PM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
I had hoped that the Adapters had been removed from sale so that they could remo…
|
n/a | RichBC | October 05, 2015, 01:34:02 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
Also you are quoting some very broad ranges of Hash Rate, how long have you trie…
|
n/a | RichBC | October 05, 2015, 01:30:50 PM |
|
|
|
ANTMINER S7 SPECULATION! Mining speculation
Don't forget that Power Consumption is also dependant on the PSU efficiency. His…
|
n/a | RichBC | October 05, 2015, 01:28:16 PM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
I had hoped that the Adapters had been removed from sale so that they could remo…
|
n/a | RichBC | October 05, 2015, 01:16:16 PM |
|
|
|
ANTMINER S5+ is available to order, 7.722TH/S 0.445J/GH Hardware
Well something on the bright side my hash card number 5 has been intermittently…
|
n/a | RichBC | October 05, 2015, 01:02:40 PM |
|
|
|
Diff thread Oct 1 to Oct 14 picks are Open. 2x bonus! + a surprise? Mining speculation
Picks going fast while we have been sleeping in the UK. Let's hope it's not thi…
|
n/a | RichBC | October 04, 2015, 02:24:45 AM |
|
|
|
Antminer S5 blade Step down voltage chip --Help need it Hardware
I do not know the part number of the chip, however it's a DC-DC step up converte…
|
n/a | RichBC | October 04, 2015, 02:17:03 AM |
|
|
|
ANTMINER S7 BATCH 2 - VS - ANTMINER S7 BATCH 3 Hardware
amount of chips are equal, the difference is in default frequency575 MB vs. 600…
|
n/a | RichBC | October 03, 2015, 03:25:09 PM |
|
|
|
[Guide] Dogie's Comprehensive Bitmain Antminer S7 Setup [HD] Hardware
I received 1 s7 but not working properly.With 600 frei it s not stable and do it…
|
n/a | RichBC | October 03, 2015, 11:52:58 AM |
|
|
|
Should i start mining? (More info inside) Mining speculation
Trouble is that even with Free Electricity it's tough. One of the best value for…
|
n/a | RichBC | October 03, 2015, 07:30:43 AM |
|
|
|
BITMAIN AntRouter R1: 1st wireless networking device with bitcoin mining chip Hardware
cybtc write-up: http://www.cybtc.com/article-1961-1.htmlInteresting line from th…
|
n/a | RichBC | October 03, 2015, 06:56:20 AM |
|
|
|
tax customs in different countries Legal
Import Duty, VAT, Handling Charges etc are a pain. Here in the UK as a rule of t…
|
n/a | RichBC | October 03, 2015, 02:57:28 AM |
|
|
|
My Bitmaintech s-7 underpreforms at freq 600 + freq 550 , not freq 500 (Fixed!) Hardware
guys try to be objective in things, we all know that Chinese products are of poo…
|
n/a | RichBC | October 03, 2015, 01:49:50 AM |
|
|
|
The combined sidehack-novak usb stick review thread. AKA GekkoScience BM1384 Hardware
If an S5 could be run at 488MHz it'd be 1.6TH but it'd also draw about 1KW and r…
|
n/a | RichBC | October 02, 2015, 04:31:22 PM |
|
|
|
ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH Hardware
We don't know / Bitmain have not told us the reason for Batch 2 being 575Mhz, 46…
|
n/a | RichBC | October 02, 2015, 04:20:45 PM |
|
|
|
The combined sidehack-novak usb stick review thread. AKA GekkoScience BM1384 Hardware
Nice result with Max, what core Voltage were you running? As an aside if an S5 c…
|
n/a | RichBC | October 02, 2015, 03:06:19 PM |
|
|
|
Sooo, What reputable mining rig manufactures are left? Mining speculation
Bitfury very much still around, and may have the best ASIC available Today with…
|
n/a | RichBC | October 02, 2015, 02:01:31 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Paperclip should work but the button is often offset from the hole so make certa…
|
n/a | RichBC | October 01, 2015, 03:18:46 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Sounds like something got messed up during the SSH edit process? I would do a ha…
|
n/a | RichBC | October 01, 2015, 03:12:58 PM |
|
|
|
Diff thread sept 17th. to sept 30th Picks are closed!! Mining speculation
Congrats to edonkey and thanks for the rollover. Yes I think we were lucky this…
|
n/a | RichBC | October 01, 2015, 02:05:10 PM |
Jump to: