| Content | Score | Started by | Date posted | ||
 |
 |
GekkoScience BM1384 Project Development Discussion Hardware
I know but it would be cool if it would mount to the s3/s5 bracket, simple and…
|
n/a | sobe-it | June 14, 2015, 04:49:09 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
The short answer is "no". The longer answer involves quoting the first post of t…
|
n/a | sobe-it | June 14, 2015, 04:25:46 PM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
Take as much time as needed. It dont HAVE to be done asap, you have done a great…
|
n/a | sobe-it | June 14, 2015, 03:04:51 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I have an s2 blade that has been mining now for about 12 hrs.
|
n/a | sobe-it | June 14, 2015, 08:19:03 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
At 0.4W/GH board-level you could be seeing closer to 15GH per chip and 110W per…
|
n/a | sobe-it | June 10, 2015, 11:58:43 AM |
|
|
|
GekkoScience BM1384 Project Development Discussion Hardware
I don't have a torn-down S3 to verify, but the S5 board and S1 board have the sa…
|
n/a | sobe-it | June 10, 2015, 11:40:31 AM |
|
|
|
antminer S5 - Chain #2 status : -'s Hardware
mine is the same way. trying to figure it out. the first chips voltage is at .4v…
|
n/a | sobe-it | June 06, 2015, 05:49:03 PM |
|
|
|
[WTS] - 10 Spondoolies SP20s w/ 10 1100w platinum supplies Computer hardware |
n/a | sobe-it | June 01, 2015, 08:43:23 PM |
|
|
|
How many mines with USB miners? Hardware
0.016 to 0.02 sounds like a lot for around 10GHs for a month.I just calculated i…
|
n/a | sobe-it | May 18, 2015, 11:02:25 AM |
|
|
|
Antminer s5 board issue Hardware
Are there any points to check to verify this? I have taken the heatsink off to c…
|
n/a | sobe-it | May 18, 2015, 06:25:24 AM |
|
|
|
How many mines with USB miners? Hardware
I have a few Antminer U1's when I first got into the game. They were fun to setu…
|
n/a | sobe-it | May 17, 2015, 05:47:10 PM |
|
|
|
S5 BeagleBone network fail - help please! Mining support
Did you happen to change the address by mistake or unknowingly? One of my s3's w…
|
n/a | sobe-it | May 17, 2015, 05:14:28 PM |
|
|
|
S5 problems - need help !!! Mining support
i would either try a lower clock or test 1 board at a time buy unplugging the wh…
|
n/a | sobe-it | May 17, 2015, 11:31:52 AM |
|
|
|
Antminer s5 board issue Hardware
one board literally does not hash no matter what port or cable i use or clock sp…
|
n/a | sobe-it | May 15, 2015, 11:03:33 PM |
|
|
|
Antminer s5 board issue Hardware
i bought an s5 off ebay and the seller said in the listing that only one board h…
|
n/a | sobe-it | May 15, 2015, 06:58:20 PM |
|
|
|
[free] 7x S1 blades 4x control boards Computer hardware
Sobe-it, do you want the controller boards ? That's all I want sadly yea, but I'…
|
n/a | sobe-it | May 06, 2015, 11:04:41 PM |
|
|
|
[free] 7x S1 blades 4x control boards Computer hardware |
n/a | sobe-it | May 06, 2015, 10:44:40 PM |
|
|
|
[WTS] 27x Antminer U1, 3x Anker 10p USB hub, 49 port USB HUB Computer hardware |
n/a | sobe-it | January 07, 2015, 12:18:11 PM |
|
|
|
Bitcoin is collapsing! Sell your ASICs NOW while you still can! Mining speculation
Incorrect. As stated above, I am not mining anything now, and I am almost done…
|
n/a | sobe-it | December 18, 2014, 12:04:09 AM |
|
|
|
[WTS] Over 1.1 TH/s of Mining Hardware - has to go Computer hardware |
n/a | sobe-it | December 16, 2014, 12:24:44 PM |
|
|
|
[WTS] Over 1.1 TH/s of Mining Hardware - has to go Computer hardware
im interested some u2's but at a fair price and escrow only
|
n/a | sobe-it | December 14, 2014, 02:04:22 PM |
|
|
|
[WTB] Old mining hardware Computer hardware
what are you looking for?I have:gridseed podsgridseed bladehex16a2antminer u1'st…
|
n/a | sobe-it | December 08, 2014, 06:14:24 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware |
n/a | sobe-it | December 07, 2014, 04:51:57 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
so i finally got around to soldering 2 boards into one. i took off the 1st and 3…
|
n/a | sobe-it | December 07, 2014, 08:46:08 AM |
|
|
|
Just some Misc Miners, Power supplies, & USB hubs for cheap. Computer hardware |
n/a | sobe-it | December 03, 2014, 02:30:05 PM |
|
|
|
The Habanero - 650GH/s - OOS Hardware
got mine hashing at 330 watts at ~420 gh/s average with the fans and water pump…
|
n/a | sobe-it | December 02, 2014, 07:28:13 PM |
|
|
|
The Habanero - 650GH/s - OOS Hardware
got mine hashing at 330 watts at ~420 gh/s average with the fans and water pump…
|
n/a | sobe-it | December 01, 2014, 11:04:03 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Allright, i thought i didn't need to add the --bmsc-options 115200:25i was using…
|
n/a | sobe-it | November 27, 2014, 03:26:47 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Did you try just connect RX(one board)-TX(second) to chain? Yep, not working yes…
|
n/a | sobe-it | November 26, 2014, 07:37:41 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Yes I just bought s1 boards from him and they will be here Friday.
|
n/a | sobe-it | November 25, 2014, 04:51:02 PM |
|
|
|
WTB: Gridseed Blade or similar Computer hardware
UK is probably not economical enough to ship to Canada. But thanks for your rep…
|
n/a | sobe-it | November 24, 2014, 08:20:48 PM |
|
|
|
WTB: Gridseed Blade or similar Computer hardware
I have a blade and 6 pods, what would you offer? I have all original packaging a…
|
n/a | sobe-it | November 24, 2014, 11:59:52 AM |
|
|
|
antminer s1, blades, controller boards, heatsinks, etc... parting out Computer hardware
Sent ya a pm, never got back to me.
|
n/a | sobe-it | November 24, 2014, 08:41:43 AM |
|
|
|
[WTS/WTT] Zeus Thunder X6 (20MHS) Computer hardware |
n/a | sobe-it | November 23, 2014, 06:01:54 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
careful with the first chip, he is the only who has quartz and clocks all other…
|
n/a | sobe-it | November 23, 2014, 12:26:35 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
update - fixed the half hashing board by scratching off the pcb mask and tinning…
|
n/a | sobe-it | November 22, 2014, 05:41:57 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
update - fixed the half hashing board by scratching off the pcb mask and tinning…
|
n/a | sobe-it | November 22, 2014, 05:16:01 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
they wont hash. i had all 4 running. one i messed up and it only hashes at half…
|
n/a | sobe-it | November 22, 2014, 04:33:14 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
they wont hash. i had all 4 running. one i messed up and it only hashes at half…
|
n/a | sobe-it | November 22, 2014, 03:41:32 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
nope cgminer wont load with that command. im using the old cgminer-run for the u…
|
n/a | sobe-it | November 22, 2014, 02:55:51 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
nope cgminer wont load with that command. im using the old cgminer-run for the u…
|
n/a | sobe-it | November 22, 2014, 01:23:10 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
how do i check that? im a noob at this stuff. the board that hashes at 1/2 speed…
|
n/a | sobe-it | November 22, 2014, 12:44:29 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
how do i check that? im a noob at this stuff. the board that hashes at 1/2 speed…
|
n/a | sobe-it | November 21, 2014, 11:11:39 PM |
|
|
|
Help with a bad seller Mining (Altcoins)
sobe-it is correct Is this your PSU http://www.newegg.com/Product/Product.aspx?…
|
n/a | sobe-it | November 20, 2014, 08:10:36 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
how do i check that? im a noob at this stuff. the board that hashes at 1/2 speed…
|
n/a | sobe-it | November 20, 2014, 06:52:46 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
well the 3rd of 4 boards has went down. so i am now forcing myself to troublesho…
|
n/a | sobe-it | November 20, 2014, 05:52:03 PM |
|
|
|
Help with a bad seller Mining (Altcoins)
if you draw too much of a load on a multiple rail psu it will trip and shut down…
|
n/a | sobe-it | November 20, 2014, 05:36:16 PM |
|
|
|
Help with a bad seller Mining (Altcoins)
If it shuts down when you load cgminer you may be tripping your psu off. Check f…
|
n/a | sobe-it | November 20, 2014, 08:32:44 AM |
|
|
|
Help with a bad seller Mining (Altcoins)
i have a thunder x6 and i use cgminer 3.1.1... i believe its this one here http:…
|
n/a | sobe-it | November 19, 2014, 10:14:50 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I also wonder whether we can run a couple (maybe more) in parallel / serial off…
|
n/a | sobe-it | November 18, 2014, 10:15:40 AM |
|
|
|
[WTS/WTT] Zeus Thunder X6 (20MHS) Computer hardware
Pms replied. TTT.
|
n/a | sobe-it | November 18, 2014, 07:35:28 AM |
|
|
|
[WTS/WTT] Zeus Thunder X6 (20MHS) Computer hardware
As title states i have a zeus thunder x6 that averages 20mhs on 210-220 clk. thi…
|
n/a | sobe-it | November 17, 2014, 09:00:07 PM |
|
|
|
The Habanero - 650GH/s - OOS Hardware
He said its a Yoli, but i dont have it in hand yet so I can't tell you any speci…
|
n/a | sobe-it | November 16, 2014, 07:00:23 PM |
|
|
|
The Habanero - 650GH/s - OOS Hardware
I just bought a used Yoli Evo/Habanero, i have a few questions. The guy claims h…
|
n/a | sobe-it | November 16, 2014, 06:27:56 PM |
|
|
|
[WTS] Various Mining Equipment S1/S2/S3/Scrypt Computer hardware
damn, i was looking for some bare s1 boards. GLWS
|
n/a | sobe-it | November 15, 2014, 05:53:29 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Quotemy cp2102s are a bit quirky too, i ended up connecting ground from cp2102 t…
|
n/a | sobe-it | November 15, 2014, 05:42:33 PM |
|
|
|
[WTS] Various Mining Equipment S1/S2/S3/Scrypt Computer hardware |
n/a | sobe-it | November 15, 2014, 05:12:40 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
QuoteThat was the release I was refering to but assumed / thought they had binar…
|
n/a | sobe-it | November 15, 2014, 12:21:11 PM |
|
|
|
[WTS] Various mining hardware Auctions
Wow over 42 btc not including shipping, must be stacked.
|
n/a | sobe-it | November 12, 2014, 02:52:28 PM |
|
|
|
[WTS] Various mining hardware Auctions
You never responded to my pm, its been a little while. I was waiting for a respo…
|
n/a | sobe-it | November 12, 2014, 10:09:01 AM |
|
|
|
original batch USB block erupters - collector item only, 330 megahash - sale? Computer hardware
i have been looking for some. the more the better, sent you a pm. lets work som…
|
n/a | sobe-it | November 10, 2014, 06:09:06 PM |
|
|
|
[WTS] Various mining hardware Auctions
N. 16 means north of 16 units? How much would a bitfury kit be shipped to 14048?
|
n/a | sobe-it | November 07, 2014, 12:56:24 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Pm's replied to.
|
n/a | sobe-it | November 03, 2014, 01:00:58 PM |
|
|
|
A tray of 260 BitFury Rev2 ASIC chips for sale Computer hardware
Damn these would be great for a little project, sadly I don't have the BTC for a…
|
n/a | sobe-it | November 03, 2014, 07:43:32 AM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Well I'd like to fill a 49 port hub but more or less would be cool. Pm me.
|
n/a | sobe-it | November 03, 2014, 07:29:00 AM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Replied to you but never got a message back.nope you said you had about 5 but yo…
|
n/a | sobe-it | November 02, 2014, 11:48:04 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Bump...... anyone have some up for grabs or what?
|
n/a | sobe-it | November 02, 2014, 10:41:38 PM |
|
|
|
[WTS] Gridseed Miners (73 available) Computer hardware
current market scrypt is getting ~$10/mhs
|
n/a | sobe-it | November 02, 2014, 09:35:11 PM |
|
|
|
Solo Mining with old outdated equipment? Mining
Someone in the thread ever found a block in solo?I haven't yet but its only been…
|
n/a | sobe-it | October 31, 2014, 04:22:37 PM |
|
|
|
[WTS] 2 x Antminer S1 Computer hardware
pm'd
|
n/a | sobe-it | October 30, 2014, 05:25:57 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
My one blade has been running for days with out any heatsink on the back. The ch…
|
n/a | sobe-it | October 30, 2014, 09:15:13 AM |
|
|
|
How much are they worth? Computer hardware
If your looking to sell pm me.
|
n/a | sobe-it | October 28, 2014, 08:01:02 AM |
|
|
|
Does anyone have some S3 coupons they want to donate to fellow forum members? Hardware
i have 2 of them
|
n/a | sobe-it | October 26, 2014, 05:15:50 PM |
|
|
|
Solo Mining with old outdated equipment? Mining
just got these real cheap off ebay and this is during their first 24 hr run.Almo…
|
n/a | sobe-it | October 26, 2014, 05:10:19 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
i have some oldschool erupters, 333mh's if you're needing them but it's probably…
|
n/a | sobe-it | October 25, 2014, 05:33:22 PM |
|
|
|
Solo Mining with old outdated equipment? Mining
just got these real cheap off ebay and this is during their first 24 hr run.
|
n/a | sobe-it | October 25, 2014, 04:26:41 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
replied
|
n/a | sobe-it | October 25, 2014, 12:03:12 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Depending on what scrypt HW you have and what you'd want for it I may be interes…
|
n/a | sobe-it | October 24, 2014, 10:55:10 AM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
Bump...I have a gridseed blade and 6 gridseed pods I can work a deal with aside…
|
n/a | sobe-it | October 24, 2014, 10:29:13 AM |
|
|
|
[WTB] Bitmaintech L1 preorders Computer hardware
Anyone with an L1 preorder who is having second thoughts, I am willing to pick u…
|
n/a | sobe-it | October 21, 2014, 11:02:58 PM |
|
|
|
[WTS] 4 Asic block erupter usbs Computer hardware
I see ant u1's go for 10 or less.
|
n/a | sobe-it | October 21, 2014, 11:31:53 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
tried hooking them together.... and no luck. it couldn't get it to set a clock…
|
n/a | sobe-it | October 20, 2014, 11:12:16 PM |
|
|
|
WTS - 4 Antminer S1 boards only - untested Computer hardware
If you haven't sold these already, you might want to make a post in this thread.…
|
n/a | sobe-it | October 20, 2014, 08:54:33 PM |
|
|
|
WTS - 4 Antminer S1 boards only - untested Computer hardware |
n/a | sobe-it | October 20, 2014, 05:59:45 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
There is another way.You can consider each board as a loop.Controler>RXD>chips>T…
|
n/a | sobe-it | October 19, 2014, 10:07:47 PM |
|
|
|
[OPEN -- POLLING] BITMAIN ANTMINER U3 USA GB Group buys
they are pretty cool. i may get one, im still trying to get all the other type u…
|
n/a | sobe-it | October 19, 2014, 12:27:09 PM |
|
|
|
Wts btc Currency exchange |
n/a | sobe-it | October 17, 2014, 07:12:37 PM |
|
|
|
[WTB] SHA or Scrypt Mining Hardware Computer hardware |
n/a | sobe-it | October 15, 2014, 05:47:04 PM |
|
|
|
[ANN] Ravenbit NODE physical coin Collectibles
purchased one. second coin from ya, looks good.
|
n/a | sobe-it | October 12, 2014, 10:06:24 PM |
|
|
|
[WTB][WTT] - Looking for USB miners Computer hardware
as title states looking for the small usb miners to mess around with. i have btc…
|
n/a | sobe-it | October 11, 2014, 12:29:33 AM |
|
|
|
Selling 3 BTC for paypal or skrill asap Currency exchange
Sent a pm earlier.
|
n/a | sobe-it | October 08, 2014, 01:19:24 PM |
|
|
|
Need to sell 1.1 btc for Paypal Currency exchange
I'm very interested, do I have to buy it all? Or would you be willing to split i…
|
n/a | sobe-it | October 07, 2014, 03:16:35 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
All the chips are connected clock in/clock out which leads to the tx/rx header (…
|
n/a | sobe-it | October 03, 2014, 10:15:07 AM |
|
|
|
Rockminer New R-Box Mining support
I dont have a rock miner but it looks as if your address isn't right. All my min…
|
n/a | sobe-it | October 03, 2014, 07:36:13 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I was getting 27 gh average but def seen 30-35 for a while. What I did was groun…
|
n/a | sobe-it | October 03, 2014, 06:43:58 AM |
|
|
|
I BUY & SELL Coins Currency exchange
I'm interested via paypal, check my trust and LMK.
|
n/a | sobe-it | October 02, 2014, 11:43:38 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
this is just running cgminer with no chip freq or options. undervolted 2.55 @ th…
|
n/a | sobe-it | October 02, 2014, 10:47:22 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | sobe-it | October 02, 2014, 02:18:11 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | sobe-it | October 02, 2014, 08:43:31 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | sobe-it | October 02, 2014, 07:26:12 AM |
Jump to: