| Content | Score | Started by | Date posted | ||
 |
 |
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
might have figured out where that resistor went.. one of my hashing boards shut…
|
n/a | soy | April 23, 2015, 10:43:07 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I've compared signals between the good and bad hash board on the S3+. The one s…
|
n/a | soy | April 22, 2015, 12:47:56 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Following Bitmain's suggestion I shut down my second S3+ and tested the bad hash…
|
n/a | soy | April 21, 2015, 12:54:23 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Following Bitmain's suggestion I shut down my second S3+ and tested the bad hash…
|
n/a | soy | April 21, 2015, 11:23:16 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
AFAIK there is no working solution to running S5 off SD card. There are instruct…
|
n/a | soy | April 21, 2015, 10:57:13 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Following Bitmain's suggestion I shut down my second S3+ and tested the bad hash…
|
n/a | soy | April 21, 2015, 10:47:38 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Following Bitmain's suggestion I shut down my second S3+ and tested the bad hash…
|
n/a | soy | April 21, 2015, 10:43:19 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Following Bitmain's suggestion I shut down my second S3+ and tested the bad hash…
|
n/a | soy | April 20, 2015, 01:40:12 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The large tank pump has arrived from China but the other two pumps have been mov…
|
n/a | soy | April 20, 2015, 04:29:00 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The large tank pump has arrived from China but the other two pumps have been mov…
|
n/a | soy | April 20, 2015, 12:58:35 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
The S3+ has two hashing boards. The miner runs at 226.76GH/s with only one boar…
|
n/a | soy | April 19, 2015, 08:05:34 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Running 2 S3+'s on a single cart, one lower than the other but due to power supp…
|
n/a | soy | April 18, 2015, 11:16:12 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
S3#2 on which I re-flowed solder at the PCIE connectors and on the inside top of…
|
n/a | soy | April 14, 2015, 10:11:55 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Changed my mind when I considered the fan noise. The room has air exhausting vi…
|
n/a | soy | April 13, 2015, 10:25:33 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Found a use for the heat. My hens have been coming up short with eggs so I pick…
|
n/a | soy | April 13, 2015, 02:10:38 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Cannot change mining pools in settings. Any advice?1) ssh in2) run the command '…
|
n/a | soy | April 13, 2015, 07:33:54 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
S3#2 on which I re-flowed solder at the PCIE connectors and on the inside top of…
|
n/a | soy | April 12, 2015, 12:47:51 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
So, the z750 supplies work under heavy load. Typically a computer supply will c…
|
n/a | soy | April 11, 2015, 02:30:13 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I tried running the pull fan on a problem S3 at full speed and found that to get…
|
n/a | soy | April 11, 2015, 09:23:32 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
S3#2 on which I re-flowed solder at the PCIE connectors and on the inside top of…
|
n/a | soy | April 09, 2015, 03:05:45 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
What might be a consideration is that the design is robust and although rated fo…
|
n/a | soy | April 08, 2015, 02:09:03 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
So, the z750 supplies work under heavy load. Typically a computer supply will c…
|
n/a | soy | April 08, 2015, 11:03:27 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Wow man, you are waaay overthinking and building your power supplies/usage.All y…
|
n/a | soy | April 08, 2015, 09:30:01 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
so one of my blades dropped off.. i went to checked and found thisthe s3 wasnt o…
|
n/a | soy | April 08, 2015, 09:42:08 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, in the post he says the most efficient test was 575-590watts, 804-817GH/s…
|
n/a | soy | April 07, 2015, 08:48:05 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, in the post he says the most efficient test was 575-590watts, 804-817GH/s…
|
n/a | soy | April 07, 2015, 01:56:04 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, in the post he says the most efficient test was 575-590watts, 804-817GH/s…
|
n/a | soy | April 07, 2015, 09:16:15 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, in the post he says the most efficient test was 575-590watts, 804-817GH/s…
|
n/a | soy | April 06, 2015, 07:11:11 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
seriously - the paper clip technique is not a big deal - theres literally milliw…
|
n/a | soy | April 06, 2015, 06:58:07 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I'm afraid most of the that don't will hot cables Don't be, been using speaker w…
|
n/a | soy | April 06, 2015, 04:04:03 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | soy | April 06, 2015, 02:51:27 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | soy | April 06, 2015, 02:14:26 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | soy | April 06, 2015, 01:58:58 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I'm afraid most of the that don't will hot cables Don't be, been using speaker w…
|
n/a | soy | April 06, 2015, 01:50:32 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I'm afraid most of the that don't will hot cables Don't be, been using speaker w…
|
n/a | soy | April 06, 2015, 11:51:07 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Characterizing my S5 @ 350M and see there's no voltage adjustment and ran a sear…
|
n/a | soy | April 06, 2015, 10:22:01 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I'm afraid most of the that don't will hot cables Don't be, been using speaker w…
|
n/a | soy | April 06, 2015, 09:47:32 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Just took the top off the 'new' bottle of liquid flux. The foil seal is broken,…
|
n/a | soy | April 05, 2015, 10:33:51 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
My flux arrived so tomorrow while fresh I'll rip down my lousy S3#2, removing al…
|
n/a | soy | April 04, 2015, 06:11:00 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
I have an Ant S3+That I can access, log into, but both boards will not come onli…
|
n/a | soy | April 04, 2015, 05:56:45 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | soy | April 03, 2015, 12:25:18 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Just two PCIE connectors plugged closest to the RJ45 and it normally runs for si…
|
n/a | soy | April 03, 2015, 05:54:12 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
What's the minimum per fan CFM on a 2x fan setup?I'm able to run at a frequency…
|
n/a | soy | April 03, 2015, 04:34:01 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Hello, I come to you because I 've realized a problem of hashrate on my S3 no mo…
|
n/a | soy | April 03, 2015, 04:27:59 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I tested underclocking-volting the C1.The best setting was suggested by another…
|
n/a | soy | April 03, 2015, 09:32:31 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
What's the minimum per fan CFM on a 2x fan setup?I'm able to run at a frequency…
|
n/a | soy | April 03, 2015, 10:02:24 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
.... we'll have to agree to disagree as I believe it is so far fetched to assume…
|
n/a | soy | April 02, 2015, 10:10:32 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Oops. Checking the good S3, S3#1, after a day at 237.5M and a great hashrate wh…
|
n/a | soy | April 01, 2015, 10:16:45 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Summer coming. Adding a little water to the tank every day or two. Without the…
|
n/a | soy | April 01, 2015, 05:28:09 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
The repasting suggestion appeared fairly early. It was almost described as some…
|
n/a | soy | March 31, 2015, 01:20:19 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
^^^ I don't think there's more to add to that ..... I don't have a malfunctionin…
|
n/a | soy | March 31, 2015, 12:39:02 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
^^^ I don't think there's more to add to that ..... I don't have a malfunctionin…
|
n/a | soy | March 31, 2015, 12:21:03 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
10-4, soy. I will post back if I have to try the reset.I am moving my internet h…
|
n/a | soy | March 31, 2015, 11:43:31 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Yes but I'm a retired technician and one does what one does.Just my thinking thi…
|
n/a | soy | March 31, 2015, 11:30:55 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
10-4, soy. I will post back if I have to try the reset.I am moving my internet h…
|
n/a | soy | March 31, 2015, 09:54:10 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Yes but I'm a retired technician and one does what one does.Just my thinking thi…
|
n/a | soy | March 31, 2015, 09:49:27 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Well if it's right in the gui like that it will be way easier to set than on my…
|
n/a | soy | March 31, 2015, 09:41:30 AM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Yes but I'm a retired technician and one does what one does.
|
n/a | soy | March 30, 2015, 05:53:43 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Has anybody found a fix for falling hashrate on some S3's? The miners I bought…
|
n/a | soy | March 30, 2015, 05:13:58 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Ahhh ... I was in the wrong forum earlier.I have a miner that I cannot see on my…
|
n/a | soy | March 30, 2015, 05:11:13 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Has anybody found a fix for falling hashrate on some S3's? The miners I bought…
|
n/a | soy | March 30, 2015, 12:20:38 PM |
|
|
|
ANTMINER S3+ Discussion and Support Thread Hardware
Cold morning I decided to move another S3 into the living room and dial them bot…
|
n/a | soy | March 29, 2015, 01:10:49 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Those are available in chrome at Walmart. I've been using a less expensive 4 sh…
|
n/a | soy | March 28, 2015, 06:48:30 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-"…
|
n/a | soy | March 28, 2015, 04:56:29 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
It seems deliberate as if to dissuade. And no, simply flashing the card wouldn'…
|
n/a | soy | March 28, 2015, 09:47:39 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
I own a metal fab shop, would anyone be interested in either galvanized, aluminu…
|
n/a | soy | March 28, 2015, 09:59:13 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Best option in my opinion is s3 case Ah, but would the cover PCIE connections p…
|
n/a | soy | March 28, 2015, 09:55:01 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, without taking the hood off, reset the miner using the hard reset button.…
|
n/a | soy | March 27, 2015, 05:15:07 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The second C1 still has the ssh login failure. To test if the problem was a wro…
|
n/a | soy | March 27, 2015, 05:12:33 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Okay, without taking the hood off, reset the miner using the hard reset button.…
|
n/a | soy | March 27, 2015, 04:54:03 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The problem again: On both C1's I put a script in /sbin and ran cp -rf /etc/sha…
|
n/a | soy | March 27, 2015, 03:50:59 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The problem again: On both C1's I put a script in /sbin and ran cp -rf /etc/sha…
|
n/a | soy | March 27, 2015, 03:10:09 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The problem again: On both C1's I put a script in /sbin and ran cp -rf /etc/sha…
|
n/a | soy | March 27, 2015, 01:38:28 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The problem again: On both C1's I put a script in /sbin and ran cp -rf /etc/sha…
|
n/a | soy | March 27, 2015, 01:14:43 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
My Notes from the teardown of my C1 Miner1. Be aware that the cooling blocks (th…
|
n/a | soy | March 27, 2015, 09:15:43 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
hii got problem with one unit.one of boards is dropping after few hours of hashi…
|
n/a | soy | March 26, 2015, 03:57:40 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Really loving this machine.
|
n/a | soy | March 26, 2015, 03:52:45 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Okay, up and running. Wow. It's light. Surprised to find only 4 PCIE connecti…
|
n/a | soy | March 26, 2015, 03:16:24 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Ah, finished my back room wiring to add an S5. Just looked and it's in Anchorag…
|
n/a | soy | March 25, 2015, 04:55:53 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Conclusion: the after market Syscooling pumps that have sharp edges and corners…
|
n/a | soy | March 25, 2015, 10:39:00 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
The most telling and important part of the miner is the cgminer version, mine on…
|
n/a | soy | March 25, 2015, 09:23:53 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
May I ask which firmware you're using? I tried one and got a failure to load th…
|
n/a | soy | March 24, 2015, 06:50:54 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
A difficulty with my C1#2. I changed the parameters including password and can…
|
n/a | soy | March 24, 2015, 06:19:51 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
May I ask which firmware you're using? I tried one and got a failure to load th…
|
n/a | soy | March 24, 2015, 05:45:24 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
A difficulty with my C1#2. I changed the parameters including password and can…
|
n/a | soy | March 24, 2015, 05:15:50 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
A difficulty with my C1#2. I changed the parameters including password and can…
|
n/a | soy | March 24, 2015, 04:14:48 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Perplexing. The JB Weld quite cured I put the after market pump back in the loo…
|
n/a | soy | March 24, 2015, 03:20:08 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
The stock pump seems to have thicker walls than the after market Syscooling pump…
|
n/a | soy | March 24, 2015, 12:29:50 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
It seems clear Bitmain lost confidence in Syscooling. The fault as I see it may…
|
n/a | soy | March 24, 2015, 11:05:04 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
5 out of 5 pumps developed leaks this week. seems the glue on the reservoir hous…
|
n/a | soy | March 23, 2015, 05:23:30 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
5 out of 5 pumps developed leaks this week. seems the glue on the reservoir hous…
|
n/a | soy | March 23, 2015, 09:21:52 AM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
My S5 order shows paid, unshipped, valid, order date 3/18 but then again so does…
|
n/a | soy | March 23, 2015, 09:31:08 AM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Wow. I can't run any of mine at that low voltage at almost full blast. You got g…
|
n/a | soy | March 22, 2015, 08:44:52 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Spoke too soon. Back up, and x's are appearing in the one C1 again. Wonder i…
|
n/a | soy | March 22, 2015, 07:02:38 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
Spoke too soon. Back up, and x's are appearing in the one C1 again. Wonder i…
|
n/a | soy | March 22, 2015, 03:07:39 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
And running with a pump/fans power supply divorced from the miners, it's easy to…
|
n/a | soy | March 22, 2015, 02:53:20 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I was able to run two miners with one pump and two radiators. Temps are 4-5 degr…
|
n/a | soy | March 22, 2015, 02:51:07 PM |
|
|
|
ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH Hardware
Along the lines of when the Ants update the GUI and how...Anyone having 1 blade…
|
n/a | soy | March 22, 2015, 02:31:20 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I flushed the loop yesterday and I woke up today to the pump squirting coolant o…
|
n/a | soy | March 22, 2015, 02:06:15 PM |
|
|
|
ANTMINER C1 Discussion and Support Thread Hardware
I was able to run two miners with one pump and two radiators. Temps are 4-5 degr…
|
n/a | soy | March 22, 2015, 01:31:59 PM |
Jump to: