| Content | Score | Started by | Date posted | ||
 |
 |
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Fun with numbers3T divided by 5 ASIC = 600GH/s per chip600G divided by 1440 core…
|
n/a | tolip_wen | June 17, 2014, 12:59:17 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
20nm @ ~0.7W/GH Talk about a fail.On another note: I really hope there's mo…
|
n/a | tolip_wen | June 17, 2014, 11:57:05 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Oh didn't got the Jupiter part. Well ok, but even so...having a normal 3TH/s Nep…
|
n/a | tolip_wen | June 14, 2014, 06:40:59 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
But, but , but20nm is impossible this year.I read it right here in this thread!l…
|
n/a | tolip_wen | June 02, 2014, 08:41:40 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
But, but , but20nm is impossible this year.I read it right here in this thread!l…
|
n/a | tolip_wen | June 02, 2014, 08:20:12 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Agree the standard case setup is sub optimal.My best air cooled configuration in…
|
n/a | tolip_wen | May 28, 2014, 10:58:41 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Hey, does anyone know how to tell which electrical outlets are on the same circu…
|
n/a | tolip_wen | May 27, 2014, 08:48:05 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
You guys have been spoilt by the era of easy money in bitcoin mining and have lo…
|
n/a | tolip_wen | May 19, 2014, 09:52:16 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
so far, i have 3 boards that dont work and one broken board, gone through only 6…
|
n/a | tolip_wen | May 12, 2014, 05:58:29 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
What's your theory on how the second shipment fell apart so easy again? Used bub…
|
n/a | tolip_wen | May 11, 2014, 12:18:06 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Yes indeed they were "Smashed off" in the first shipment, but also in the subseq…
|
n/a | tolip_wen | May 10, 2014, 06:33:40 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Those caps look as if they didn't get much flux, and knocked-off fairly easy, an…
|
n/a | tolip_wen | May 09, 2014, 12:15:41 AM |
|
|
|
Hardware monitoring Hardware
Teamviewer to a $150 laptop sitting on the same network as the miners. There's a…
|
n/a | tolip_wen | April 30, 2014, 09:14:22 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
So who has the engineering skills to design proper heatsink and board mounting h…
|
n/a | tolip_wen | April 30, 2014, 05:22:31 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Theres a whole world of difference between a GPU and an ASIC. All that article s…
|
n/a | tolip_wen | April 08, 2014, 10:57:12 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
And using bfgminer how i can oc? With cgminer no problem but using bfgminer i do…
|
n/a | tolip_wen | April 07, 2014, 02:51:08 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
And using bfgminer how i can oc? With cgminer no problem but using bfgminer i do…
|
n/a | tolip_wen | April 06, 2014, 10:12:11 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
to overclocking knc saturn is the same way to overclock knc jupiter?Yes, for 'al…
|
n/a | tolip_wen | April 03, 2014, 11:57:51 AM |
|
|
|
Server Power Supply Interface Board - for standalone miners and GPU rigs Hardware
Excellent thread!Thx all who posted links for parts.I'm DIYing my IBM and HP PSU…
|
n/a | tolip_wen | April 01, 2014, 04:19:09 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Hola, cuantos voltios le podria poner como maximo a cada die en la ventana advan…
|
n/a | tolip_wen | April 01, 2014, 01:38:57 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
I know that technical details are important, but what we don't know is what will…
|
n/a | tolip_wen | April 01, 2014, 12:10:29 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
few volts could be used as maximum per die having temperatures of 50 and 57 º C…
|
n/a | tolip_wen | April 01, 2014, 02:02:24 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
The gpu is also an ASIC, so of course there is a clear comparison to be made.Mos…
|
n/a | tolip_wen | March 31, 2014, 11:50:47 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Might put your window capture advance? volts to see die?I think I do not underst…
|
n/a | tolip_wen | March 31, 2014, 08:03:57 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Do they have 20nm asics ready?I hear Nvidia has delayed 20nm parts till 2015, an…
|
n/a | tolip_wen | March 31, 2014, 05:43:01 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
I know that technical details are important, but what we don't know is what will…
|
n/a | tolip_wen | March 31, 2014, 04:34:22 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
shuttle times for 28nm were ~80 days, 8 weeks was I agree, very well done on the…
|
n/a | tolip_wen | March 31, 2014, 01:54:51 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Quoted from the 20nm post... "actual cybershuttle cycle time figures on the 20n…
|
n/a | tolip_wen | March 31, 2014, 12:27:16 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Quoted from the 20nm post... "actual cybershuttle cycle time figures on the 20n…
|
n/a | tolip_wen | March 31, 2014, 12:06:52 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
has someone figures about max. chip temperature of Jupiter October and November…
|
n/a | tolip_wen | March 30, 2014, 03:39:15 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
my jupiter every week stuck settings is not seen on the website or come by the K…
|
n/a | tolip_wen | March 30, 2014, 12:09:02 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
which is the maximum OC for Jupiter October 4 VRMs?The upper limits vary.All ASI…
|
n/a | tolip_wen | March 30, 2014, 11:53:40 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
The KnC 28nm ASIC can run @ lower power, slower.It will be possible to delay the…
|
n/a | tolip_wen | March 30, 2014, 10:26:40 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
anyone still holding the first customer batch neptune order?I'm still long on Ne…
|
n/a | tolip_wen | March 27, 2014, 05:19:29 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
My November Jupiter is set at 291, as per the following line in cgminer.sh:Code:…
|
n/a | tolip_wen | March 27, 2014, 04:55:03 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Plz help somebody, how to manually set frequencies in v1.0 firmware?There is no…
|
n/a | tolip_wen | March 27, 2014, 10:46:57 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Batch 2 Neptune Order @ ~$10k USDAsk for refund ? [Y] / [N] Why ?Y, KnC and BFL…
|
n/a | tolip_wen | March 26, 2014, 01:21:17 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Simple question: Once I edit my /etc/init.d/cgminer.sh file, how do I restart cg…
|
n/a | tolip_wen | March 26, 2014, 01:03:01 PM |
|
|
|
[ANN] Spondoolies-Tech launches a new line of ASIC miners - Best W/GH/s ratio Hardware
There´s a reason why engineers/operators wears, almost, spacesuits when working…
|
n/a | tolip_wen | March 25, 2014, 08:48:53 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
My original procs.sh is/was flawed!It writes temp files to permanent storage the…
|
n/a | tolip_wen | March 23, 2014, 01:09:33 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
somebody can explain me how change cgminer for bfgminer?EDIT !!!I just upgraded…
|
n/a | tolip_wen | March 19, 2014, 03:46:37 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
A tid-bit for bfgminer users(cgminer only folks, read it and weep) An awk progra…
|
n/a | tolip_wen | March 18, 2014, 12:31:27 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support |
n/a | tolip_wen | March 19, 2014, 03:20:53 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
FYIOne of my die went on strike, protesting adverse working conditions.We negoti…
|
n/a | tolip_wen | March 17, 2014, 08:28:43 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I made a new modifications to cgminer.sh to make the clock configuration easier…
|
n/a | tolip_wen | March 14, 2014, 07:03:09 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
@ Tolip Wen: You mean the 6 solder points right next to the PCI-e adapter alread…
|
n/a | tolip_wen | March 09, 2014, 06:42:40 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I thought of a POSSIBLE use for the PCIe extensions.Step one, cut them in 1/2.(t…
|
n/a | tolip_wen | March 08, 2014, 09:02:58 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Fun with numbers@1440 cores per ASICEither 3 ASIC runnin 1Th/s (750MHz clock) or…
|
n/a | tolip_wen | March 07, 2014, 09:08:31 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
SNIPWhat temps ya running? got a IR gun? you oc'in?When I first powered it on, w…
|
n/a | tolip_wen | March 07, 2014, 05:30:15 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Are they 2 Saturns? Why not use one controller for the 4 asic boards? What brand…
|
n/a | tolip_wen | March 05, 2014, 08:29:09 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Kinda OT but WTF Some KnCMiner Hardware Pr0n.qty 1) 60mm 3x 120 radiatorqty 4) O…
|
n/a | tolip_wen | March 05, 2014, 05:33:41 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
@ bondusThe whole Rtune feedback loop has 3 flavors with just the Oct. units.8 V…
|
n/a | tolip_wen | February 26, 2014, 03:47:59 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Edit to say, after to put again the firm 0.99.1 tune, i have a little problem wi…
|
n/a | tolip_wen | February 25, 2014, 11:43:05 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Since you have ordered the parts you must know the value of then RTUNE and RTrim…
|
n/a | tolip_wen | February 25, 2014, 08:09:19 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I will start with a warning. It is unknown if this is safe. KnC may have turned…
|
n/a | tolip_wen | February 25, 2014, 05:52:42 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
TRAGEDY!I cooked a blue PCI extender.One corner of the white connector on the en…
|
n/a | tolip_wen | February 22, 2014, 08:35:59 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I might have overlooked something obvious but can someone tell me the math behin…
|
n/a | tolip_wen | February 22, 2014, 09:47:42 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
What's the "SNMP community" and "SNMP managers" thing located in the Network tab…
|
n/a | tolip_wen | February 22, 2014, 08:03:06 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I might have overlooked something obvious but can someone tell me the math behin…
|
n/a | tolip_wen | February 22, 2014, 07:48:32 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
How can we wake a dead Die up for Nov. Jupiter?The option Auto SPI Voltage can't…
|
n/a | tolip_wen | February 22, 2014, 12:17:55 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Can't seem to find the rest the chart below anywhere. Anybody know the settings…
|
n/a | tolip_wen | February 12, 2014, 05:13:32 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Can we put as settings 221 or only 231 211?Yes you can.. I don't have easy acces…
|
n/a | tolip_wen | February 06, 2014, 04:47:05 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
It was asked earlier the location of the temp measurement ICIt is located straig…
|
n/a | tolip_wen | January 27, 2014, 03:19:32 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
@temenWhat speed is each 'die' running at?(48 core per die, 4 die per ASIC)clock…
|
n/a | tolip_wen | January 27, 2014, 02:52:41 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Ideas on coolingI put air obstructions in my case so all air must pass the ASIC…
|
n/a | tolip_wen | January 24, 2014, 12:15:45 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
OK, finally decided to give this a go, october jupiter 8 vrm which was running a…
|
n/a | tolip_wen | January 10, 2014, 07:24:29 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I have one die running 950MHz (251) for over a month.Most others are way slowe…
|
n/a | tolip_wen | January 09, 2014, 06:08:50 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I've asked EK-Waterblocks http://www.ekwb.com/ to design a waterblock for the Kn…
|
n/a | tolip_wen | January 09, 2014, 02:02:03 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I've managed to get most cores enabled while running 211 but I still get lots o…
|
n/a | tolip_wen | January 08, 2014, 03:59:53 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
I've managed to get most cores enabled while running 211 but I still get lots o…
|
n/a | tolip_wen | January 08, 2014, 03:26:15 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
BTW, the only people that will benefit from removing the blue power cables insid…
|
n/a | tolip_wen | January 06, 2014, 10:51:06 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
It could also be that one of the other wires had no connection. (insulation in c…
|
n/a | tolip_wen | December 27, 2013, 08:33:56 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Found interesting. Think it's my problem, please look in yours (October miner) -…
|
n/a | tolip_wen | December 24, 2013, 05:45:57 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Need help. SD full image of October Saturn (Saturn-B52, 4 VRM)My Bad (After wron…
|
n/a | tolip_wen | December 24, 2013, 11:21:24 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Thanks. Btw is there any difference between installing bfgminer using your metho…
|
n/a | tolip_wen | December 23, 2013, 11:06:22 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
bitcoinorama mentioned KnC is planning to release PLL clock FW.You can wait for…
|
n/a | tolip_wen | December 23, 2013, 04:46:46 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
And at the end I changed to:Code:start-stop-daemon -b -S -x screen -- -S bfgmine…
|
n/a | tolip_wen | December 23, 2013, 10:29:56 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
OK, I get what each variable means and how to manipulate it, I'm just not sure t…
|
n/a | tolip_wen | December 21, 2013, 04:21:55 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Ok, my "perfect" boards consume 41-43W, but the boards with bad die-0 problems r…
|
n/a | tolip_wen | December 20, 2013, 10:24:34 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Just wanted to drop a big Thank You to tolip-wen and everyone who helped get thi…
|
n/a | tolip_wen | December 20, 2013, 07:22:04 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
tolip_wenCould give some help for the clock values (in the command line)?Or just…
|
n/a | tolip_wen | December 19, 2013, 08:34:47 AM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
hey guys any chat or irc kncminer for we talk more IRC server = FreenodeIRC cha…
|
n/a | tolip_wen | December 18, 2013, 11:56:20 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
What should I change? The bolded line?modify the line you bolded to change whole…
|
n/a | tolip_wen | December 18, 2013, 11:24:59 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
What do you mean restart the miner?sed sBD1BF1B /config/zzz.sh ; /config/zzz.sh…
|
n/a | tolip_wen | December 18, 2013, 11:13:58 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
How do you do this with bfgminer? When you launch bfgminer with the command "./b…
|
n/a | tolip_wen | December 18, 2013, 03:38:01 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
The following is my HW errors per core (hand did editing)Code:S1A0Die 0 775MHz…
|
n/a | tolip_wen | December 18, 2013, 05:03:07 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
The best results are tuning each die for low HW error.Goal of
|
n/a | tolip_wen | December 17, 2013, 10:59:56 AM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Here is a partial list of clock speed and value(s)(it goes on in both directions…
|
n/a | tolip_wen | December 15, 2013, 09:30:39 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Everyone keeps referring to 0.99 test. Is that the same as 0.99 Tuning and does…
|
n/a | tolip_wen | December 15, 2013, 09:18:04 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
TRAGEDY 2 days in a row my miner waits for me to sleep and stops one die.(I am i…
|
n/a | tolip_wen | December 13, 2013, 10:03:40 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
This is my 'slow' one.first ASIC die 0,2,3 are running 1F1die 1 is running 3E2Se…
|
n/a | tolip_wen | December 09, 2013, 08:41:57 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
While I was asleep bfgminer quit and cgminer took over at default speed.Below is…
|
n/a | tolip_wen | December 09, 2013, 07:53:17 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
TRY 1F1the first 1 is in the previous byte01 D1 (probably already tried w…
|
n/a | tolip_wen | December 09, 2013, 06:38:53 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
It seems many are interested but few familiar with the tools.DANGER WILL ROBINSO…
|
n/a | tolip_wen | December 07, 2013, 11:18:40 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
Question.Got a couple up no problem (after putting fan shrouds and one fan blade…
|
n/a | tolip_wen | December 06, 2013, 08:38:05 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
@ thorvaldI modify the one included with 99 test. If VI is the obstacle instal…
|
n/a | tolip_wen | December 06, 2013, 07:25:27 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
You should never exceed 47A and 37W indicated in the Advanced page of the test s…
|
n/a | tolip_wen | December 06, 2013, 04:35:58 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Any updates to this ? I'm sure lots of people are watching and standing by I pro…
|
n/a | tolip_wen | December 06, 2013, 03:57:07 PM |
|
|
|
Swedish ASIC miner company kncminer.com Mining (Altcoins)
CYPHERNow I understand your agressive inverse trolling recently. (engage a troll…
|
n/a | tolip_wen | December 06, 2013, 02:23:16 PM |
|
|
|
Hacking The KNC Firmware: Overclocking Mining support
Just to be clear.On die clock is normally ~749.975 MHz (
|
n/a | tolip_wen | December 05, 2013, 07:47:31 PM |
Jump to: