[0/140 LEFT] ★ ONE OUNCE .999 FINE SILVER - CRYPTOLATOR PHYSICAL BITCOIN ★ - page 4.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: bithalo on June 03, 2014, 07:55:58 PM

I would vote for higher quality. There's a lot of lesser quality coins out there, but the thing that appealed to me with your coin was the sculpted relief, varying finishes (polished vs frosted), size, weight, and rarity. After I received my first coin, I liked it so much, I ordered another.

i think you should maintain the quality of your brand and not devalue it.

If the price of bitcoins stays high, people will be willing to pay more for the coin itself.

Great ! Ok, now I'm pretty sure I'll go with higher quality !

The only thing I need to decide is the material....

Thanks for your input ! Tongue

bithalo

legendary

Activity: 1470

Merit: 1017

Star Wars Ep. 9 is here

I would vote for higher quality. There's a lot of lesser quality coins out there, but the thing that appealed to me with your coin was the sculpted relief, varying finishes (polished vs frosted), size, weight, and rarity. After I received my first coin, I liked it so much, I ordered another.

i think you should maintain the quality of your brand and not devalue it.

If the price of bitcoins stays high, people will be willing to pay more for the coin itself.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: Pistachio on June 03, 2014, 07:28:23 PM

Quote from: Cryptolator on June 03, 2014, 05:42:09 PM

Quote from: LouReed on June 03, 2014, 05:33:18 PM

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

I would probably be able to sell them for around 10-12$ each... Maybe less...

Would you still be able to offer multi-signature with the lower cost coins? My guess is if the exchange rate continues to head up close to $1000, I think higher quality will sell. If it drops back to the $400-$500s, then the lower cost coins are the way to go. I would like to see the higher quality coins, but the market is tough right now. Smoothie didn't even get face value for his recent auction of funded 1/10 rolls. After the auction he lowered the price on his website. This could all change mattering the price of BTC.

Antique copper would be nice.

Yes, I will still offer multi-sig since it has been the most used options of the first series...

This option is really time consuming (I can't make a batch of them, I do them when I receive the order), so that is one of the reason it make the price a bit higher.

Also, at this price, it comes only in a air-tite capsule, no box unfortunately... (If peoples really want box, I may add this options but it would add something like 5$-6$ per coin)

Thanks for your input !

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: elianite on June 03, 2014, 07:20:01 PM

Quote from: Cryptolator on June 03, 2014, 06:59:07 PM

Probably quite a bit, since the die would be computer created instead of plaster hand sculpted... the material option I have is: ALUMINUM, NICODIUM, BRONZE, COPPER, NICKEL

The options I have for the most expensive one are: ANTIQUE BRONZE, SHINY BRASS, ANTIQUE NICKEL, SHINY NICKEL, ANTIQUE COPPER OR SHINY COPPER COIN

What material would you prefer ?

Definitely not: aluminum

I (and i think most) want a heavy coin, a coin with mass. Not light like made by casascius. A bold, attention grabbing thing to put on display.
shiny copper is good, antique copper is better. antique nickel is also a good bet.
If you do shiny nickel, you must use the same mint as last time, since coins will be same color. I think it could go very well.

To be quite honest, I would consider the Shiny nickel and use the same mint the coins would then be the same except for different metal and compliment each other well.

I say antique broze OR antique copper OR shiny nickel

Thanks for your input ! I think I'll stay with my current mint and I'll see how it goes, I want high quality over high profit !

I dont think I would go with Shiny Nickel since it would look too much like the silver series...

Antique Bronze could look good, I need to make my mind before 72h since I want to order before the weekend.

The process time is minimum 6 weeks, so I guess I'll have them in the end of July or something...

Pistachio

legendary

Activity: 1456

Merit: 1000

Quote from: Cryptolator on June 03, 2014, 05:42:09 PM

Quote from: LouReed on June 03, 2014, 05:33:18 PM

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

I would probably be able to sell them for around 10-12$ each... Maybe less...

Would you still be able to offer multi-signature with the lower cost coins? My guess is if the exchange rate continues to head up close to $1000, I think higher quality will sell. If it drops back to the $400-$500s, then the lower cost coins are the way to go. I would like to see the higher quality coins, but the market is tough right now. Smoothie didn't even get face value for his recent auction of funded 1/10 rolls. After the auction he lowered the price on his website. This could all change mattering the price of BTC.

Antique copper would be nice.

elianite

legendary

Activity: 1400

Merit: 1143

The Cryptonumist

Quote from: Cryptolator on June 03, 2014, 06:59:07 PM

Probably quite a bit, since the die would be computer created instead of plaster hand sculpted... the material option I have is: ALUMINUM, NICODIUM, BRONZE, COPPER, NICKEL

The options I have for the most expensive one are: ANTIQUE BRONZE, SHINY BRASS, ANTIQUE NICKEL, SHINY NICKEL, ANTIQUE COPPER OR SHINY COPPER COIN

What material would you prefer ?

Definitely not: aluminum

I (and i think most) want a heavy coin, a coin with mass. Not light like made by casascius. A bold, attention grabbing thing to put on display.
shiny copper is good, antique copper is better. antique nickel is also a good bet.
If you do shiny nickel, you must use the same mint as last time, since coins will be same color. I think it could go very well.

To be quite honest, I would consider the Shiny nickel and use the same mint the coins would then be the same except for different metal and compliment each other well.

I say antique broze OR antique copper OR shiny nickel

elianite

legendary

Activity: 1400

Merit: 1143

The Cryptonumist

Hard question. You managed to sell your first batch just fine, and now that your over that 'hump', your a respected coin maker with a brand. Your coins were AMAZING quality; stunning. That said, I think a smallish batch of 500 coppers would sell. You make high quality coins; keep it that way.

On the other hand, $25 is alot for a copper coin, BUT perhaps not so much if it has a wallet included.

I assuming your making the coppers in the same design as this previous coin In that case, I would say go with the old mint, and have them both uniform.

From a business perspective however, go with the lower quality. While the previous coin was simply amazing, with a very cheap coin of 10-12 you could get ALOT of people buying them. For me, $25 requires some consideration but ill spend $12 without much of it. You could easily become the most popular maker of such coins with wallets; many buyers would come. This is very good long-term.

All in all, tough choice..

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: LouReed on June 03, 2014, 05:51:00 PM

Quote from: Cryptolator on June 03, 2014, 05:42:09 PM

Quote from: LouReed on June 03, 2014, 05:33:18 PM

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

I would probably be able to sell them for around 10-12$ each... Maybe less...

Any idea how much the quality will suffer in order to get that price?

Probably quite a bit, since the die would be computer created instead of plaster hand sculpted... the material option I have is: ALUMINUM, NICODIUM, BRONZE, COPPER, NICKEL

The options I have for the most expensive one are: ANTIQUE BRONZE, SHINY BRASS, ANTIQUE NICKEL, SHINY NICKEL, ANTIQUE COPPER OR SHINY COPPER COIN

What material would you prefer ?

LouReed

hero member

Activity: 732

Merit: 500

Nosce te Ipsum

Quote from: Cryptolator on June 03, 2014, 05:42:09 PM

Quote from: LouReed on June 03, 2014, 05:33:18 PM

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

I would probably be able to sell them for around 10-12$ each... Maybe less...

Any idea how much the quality will suffer in order to get that price?

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: LouReed on June 03, 2014, 05:33:18 PM

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

I would probably be able to sell them for around 10-12$ each... Maybe less...

LouReed

hero member

Activity: 732

Merit: 500

Nosce te Ipsum

Quote from: Cryptolator on June 03, 2014, 04:39:50 PM

I am currently trying to find the best deal (Quality/Price) for my next batch...

I would like to go with my current minters but the price is a bit on the high side, of course the quality would be awesome like the current batch but that would mean that I would have to sell them in the 25ish bucks range...

This version would be in fine coppers (Shinny), that would look fabulous..

The denomination would be 0.1BTC and the batch would be 500.

What you guys think ?

Should I go with a cheap one and sacrifice the quality or go with higher quality ?

Thanks for helping me out making my mind, cause right now, I am really not sure what move I should make ! :/

Jonathan

I personally would prefer the higher quality myself. Do you know how much cheaper the alternative minter would be?

I too would be interested in at least 10 of the lowest possible s/n coins if the price will be at or below $25/coin.

Cryptolator

hero member

Activity: 508

Merit: 500

I am currently trying to find the best deal (Quality/Price) for my next batch...

I would like to go with my current minters but the price is a bit on the high side, of course the quality would be awesome like the current batch but that would mean that I would have to sell them in the 25ish bucks range...

This version would be in fine coppers (Shinny), that would look fabulous..

The denomination would be 0.1BTC and the batch would be 500.

What you guys think ?

Should I go with a cheap one and sacrifice the quality or go with higher quality ?

Thanks for helping me out making my mind, cause right now, I am really not sure what move I should make ! :/

Jonathan

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: hustler100 on June 03, 2014, 02:43:59 AM

These are really amazing ! Thank you Cryptolator

Put me down for you next release ! BTC

Cool

Wow !

Thanks !

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: Pistachio on June 01, 2014, 08:08:43 AM

Quote from: Cryptolator on May 30, 2014, 12:27:40 AM

Quote from: bithalo on May 29, 2014, 11:12:09 PM

Quote from: Cryptolator on May 29, 2014, 09:02:44 PM

No more coins left.

I'll put the four special coins on eBay starting with the Red next week (Yes, I know I've been saying that for something like three week, but this time, it will happen Tongue

)

Wow.. that went fast. I could have sworn there were 35 or so left as of today. Glad I got my two in.

Are you planning on making a new design soon, now that you're sold out? I'd love to have them limited again to around the same edition size.

Next batch will be lower denomination on different material with the same design and will be cheaper.

I am currently working on a new design that will be released in January 2015, since I plan to make a different design once per year.

Might have some surprise before the end of the year tho ! Wink

If you are taking reservations put me down for the first ten of your next denomination

.

I'll try to reserve 10 as low as possible serial number for you !

hustler100

full member

Activity: 130

Merit: 100

In Crypto We Trust

These are really amazing ! Thank you Cryptolator

Put me down for you next release ! BTC

Cool

Pistachio

legendary

Activity: 1456

Merit: 1000

Quote from: Cryptolator on May 30, 2014, 12:27:40 AM

Quote from: bithalo on May 29, 2014, 11:12:09 PM

Quote from: Cryptolator on May 29, 2014, 09:02:44 PM

No more coins left.

I'll put the four special coins on eBay starting with the Red next week (Yes, I know I've been saying that for something like three week, but this time, it will happen Tongue

)

Wow.. that went fast. I could have sworn there were 35 or so left as of today. Glad I got my two in.

Are you planning on making a new design soon, now that you're sold out? I'd love to have them limited again to around the same edition size.

Next batch will be lower denomination on different material with the same design and will be cheaper.

I am currently working on a new design that will be released in January 2015, since I plan to make a different design once per year.

Might have some surprise before the end of the year tho ! Wink

If you are taking reservations put me down for the first ten of your next denomination

.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: snarlpill on May 30, 2014, 04:38:49 AM

Quote from: Cryptolator on May 25, 2014, 01:05:28 AM

Quote from: snarlpill on May 25, 2014, 12:08:07 AM

Love your coins, and all physical BTC I've seen so far really. I would love to have a personal collection of them all someday when my funds allow it. I'm currently working on a section on my site discussing offline/physical wallets and I will definitely try to remember to mention Cryptolator.

Great ! Thanks !

Page mentioning Cryptolator in the safety section on my site up here. My site is mostly unfinished and the pages that are written are getting constantly updated by myself whenever I can find the time. Feel free to visit my Bitcoin faucet here if you would like to support my site.
Thanks,
snarlpill

Thanks for the mention !

snarlpill

hero member

Activity: 910

Merit: 530

$5 24k Gold FREE 4 sign-up! Mene.com/invite/h5ZRRP

Quote from: Cryptolator on May 25, 2014, 01:05:28 AM

Quote from: snarlpill on May 25, 2014, 12:08:07 AM

Love your coins, and all physical BTC I've seen so far really. I would love to have a personal collection of them all someday when my funds allow it. I'm currently working on a section on my site discussing offline/physical wallets and I will definitely try to remember to mention Cryptolator.

Great ! Thanks !

Page mentioning Cryptolator in the safety section on my site up here. My site is mostly unfinished and the pages that are written are getting constantly updated by myself whenever I can find the time. Feel free to visit my Bitcoin faucet here if you would like to support my site.
Thanks,
snarlpill

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: bithalo on May 29, 2014, 11:12:09 PM

Quote from: Cryptolator on May 29, 2014, 09:02:44 PM

No more coins left.

I'll put the four special coins on eBay starting with the Red next week (Yes, I know I've been saying that for something like three week, but this time, it will happen Tongue

)

Wow.. that went fast. I could have sworn there were 35 or so left as of today. Glad I got my two in.

Are you planning on making a new design soon, now that you're sold out? I'd love to have them limited again to around the same edition size.

Next batch will be lower denomination on different material with the same design and will be cheaper.

I am currently working on a new design that will be released in January 2015, since I plan to make a different design once per year.

Might have some surprise before the end of the year tho ! Wink

bithalo

legendary

Activity: 1470

Merit: 1017

Star Wars Ep. 9 is here

Quote from: Cryptolator on May 29, 2014, 09:02:44 PM

No more coins left.

I'll put the four special coins on eBay starting with the Red next week (Yes, I know I've been saying that for something like three week, but this time, it will happen Tongue

)

Wow.. that went fast. I could have sworn there were 35 or so left as of today. Glad I got my two in.

Are you planning on making a new design soon, now that you're sold out? I'd love to have them limited again to around the same edition size.

Topic: [0/140 LEFT] ★ ONE OUNCE .999 FINE SILVER - CRYPTOLATOR PHYSICAL BITCOIN ★ - page 4. (Read 14224 times)