Topic: 1060 vs 1070 mining rig - page 2. (Read 23779 times)
If you are looking for a 2 yr GPU with good resell value 1070 would be the best option....
If you have more rigs, that means you're paying for more motherboards, CPUs, RAMs, racks and power supplies.
It might be more cost-effective to get more expensive cards.
It might be more cost-effective to get more expensive cards.
Actually you can estimate about $750 per rig for non-GPU Equipment.
MB, PSU, CPU, RAM, SSD (Optional), Risers, Misc (wood and aluminum for frame, etc)
Not counting resale value, 1060 is still a better buy than 1070 and about a 10% better ROI give or take.
The part everyone is forgetting is availability. You can currently get a 1060 6 GB card for under $300. The cheapest 1070 you will find is $420+ and up to the point where its almost the same price as a 1080.
I think bigger is better for eth 1060 but for everything else 1080 ti ! Yes it consumes a lot of power but you have less cards and more hashing power!
in your case i would go for 6x 1060
in your case i would go for 6x 1060
I also need advice. I already have 2x 3 1080 ti. I can get 1080 ti for 700euro, and 1060 6gb for 275€. I plan to mine eth until difficult dont jump, then maybe ubiq or something. 1080 ti for zcash or something. What is better 1070 8gb 420€ or 1060 6gb 275€. I think 6 1060 6gb with 750w psu is rly good deal.
why the 1060 6gb? good for gaming, but no use for crypto. the 3gb version is under 200.
only 750w (peak) for six 1060 did not work (for me). a 750W psu will give you just 750W * 85 - 92% = ca. 650 - 700W (max).
but each 1060 takes 100 W and the CPU / MB another 120 W. you should not run 24/7 on max.
i use 2 psu (1 x 550W and 1 x 650 or 750W) for each mining rig with 6 x 1060 3gb. i found this solution more stable than 1 x 1000 W psu
The thing is your hashrate will change with higher models and they will become more. But they will also cost you more money for that. I think it will balance thr final cost anyway.
So better go for 1070 model as you will face more difficulty in the near future meaning you have to be one step ahead of everyone. Better go for 1070 in anyway the equation will balance due to cost of hardware and consumption of energy.
There is one more thing your electricity costs are way high than US. Its twice than the US country and i hope you have calculated the ROI properly. I guess you should definitely go for 1070 model only.
So better go for 1070 model as you will face more difficulty in the near future meaning you have to be one step ahead of everyone. Better go for 1070 in anyway the equation will balance due to cost of hardware and consumption of energy.
There is one more thing your electricity costs are way high than US. Its twice than the US country and i hope you have calculated the ROI properly. I guess you should definitely go for 1070 model only.
http://www.parallelminer.com/product-category/power-supply-kit/
You still need a regular PSU to power the motherboard, CPU etc though.
You still need a regular PSU to power the motherboard, CPU etc though.
Well, actually you can use a PicoPSU to power the motherboard and CPU.
I also need advice. I already have 2x 3 1080 ti. I can get 1080 ti for 700euro, and 1060 6gb for 275€. I plan to mine eth until difficult dont jump, then maybe ubiq or something. 1080 ti for zcash or something. What is better 1070 8gb 420€ or 1060 6gb 275€. I think 6 1060 6gb with 750w psu is rly good deal.
for other algos then all scales pretty the same so you can chose if you want density for a premium or if you want lot of rig to administer and pay a lil less
It might be more cost-effective to get more expensive cards.
Nope. Quite the opposite actually if you know what you're doing.
You use a used PC that comes with a cpu, ram, mobo, power supply. Then one medium size power supply for your GPUs.
This is a pretty good miner. But now you should use specialized miners. These machines are being sold a lot in China.
I would go for the 1070 rig. When ETH disables POW mining, the 1060's card architecture will not allow you to mine certain algorithms which the 1070 can do.
Its future proof and you will spend less on electricity and other computer parts.
Its future proof and you will spend less on electricity and other computer parts.
Which algorithms does that apply to? I know 3GB 1060s won't be able to mine any DAG which tops 3GB but afaik there's nothing about the 1060's card architecture which will stops it mining anything a 1070 can...
I would go for the 1070 rig. When ETH disables POW mining, the 1060's card architecture will not allow you to mine certain algorithms which the 1070 can do.
Its future proof and you will spend less on electricity and other computer parts.
Its future proof and you will spend less on electricity and other computer parts.
comparing the gpu on the worst algo for nvidia is bad, because the 1080ti and 1080 use gddrx5, which are bad on dagger, comapre it on skein or blake2s or any other algo
you are right. but there is actually no profitable blake coin to mine.
if profit of blake-coin is half to equihash or ethash i have no benefit from the better handling of the faster card.
compare it on skunk, it's very hot algo now, or equihash also is not that bad, the 1080 ti is 2.5 times faster than a 1060
Depends on how long you want to mine with the cards. If you are playing the long game until the cards die (all with powered risers), then 1050 ti. If you are looking at 3 years worth of mining then trying to sell 1070s. If you are looking at getting your ROI back then selling them to upgrade cards then 1060 (I am bias to 6gb because of better perceived resale value.)
I have 8 750 ti cards running on two rigs been running since April 2014 only one bad card with warranty exchange during that time. The 1-EVGA 1070 SC and 1-1070 SC2 have had warranty replacements already.
I have 8 750 ti cards running on two rigs been running since April 2014 only one bad card with warranty exchange during that time. The 1-EVGA 1070 SC and 1-1070 SC2 have had warranty replacements already.
comparing the gpu on the worst algo for nvidia is bad, because the 1080ti and 1080 use gddrx5, which are bad on dagger, comapre it on skein or blake2s or any other algo
you are right. but there is actually no profitable blake coin to mine.
if profit of blake-coin is half to equihash or ethash i have no benefit from the better handling of the faster card.
lol no it's not 80% more hash where you get that? a 1080ti is 80% more faster than a 1070 not 1060, maybe you are confusing with the 1080s
i used 2 recources for the comparsion:
whattomine.com
1060 - Ethhash: 21.3 Mh/s
1070 - Ethhash: 30.0 Mh/s
1080Ti - Ethhash: 35.0 Mh/s
https://www.nicehash.com/?p=calc
1060 - DaggerHashimoto: 20.13 MH/s
1070 - DaggerHashimoto: 28.69 MH/s
1080Ti - DaggerHashimoto: 35.00 MH/s
are both pages wong with the Ti?
for my 30 1060 the result is nearly as stated there.
comparing the gpu on the worst algo for nvidia is bad, because the 1080ti and 1080 use gddrx5, which are bad on dagger, comapre it on skein or blake2s or any other algo
Hmmm... I have them on Asrock 970 performance Mobo with an additional connection to power the PCI's.
Additional power is the key here.
They have been running around 60 watts each for several months with no issue. I also have 2x 1060's on risers (connected to the PSU) with no issues from the mother board. Its actually one of my most stable platforms because I don't really tweak the settings. I am not sure what the 750ti's were pulling through the Mobo but I guess I will have to keep an eye on it.
295x2 (500w card) 10 watts through mobo, 750ti (35w card) 35 watts through mobo (no pcie power connector model). So you never know.
I have 2 1050ti's running
No power connection needed only fed power through the motherboard.
No power connection needed only fed power through the motherboard.
I burned my 12V pins on motherboard atx-connector with two 750ti (without pcie power connectors) when testing them back in 2014, it was an overkill rig which went alive through btc and scrypt mining and then failed on 2x35 watts cards...
Hmmm... I have them on Asrock 970 performance Mobo with an additional connection to power the PCI's. They have been running around 60 watts each for several months with no issue. I also have 2x 1060's on risers (connected to the PSU) with no issues from the mother board. Its actually one of my most stable platforms because I don't really tweak the settings. I am not sure what the 750ti's were pulling through the Mobo but I guess I will have to keep an eye on it.
lol no it's not 80% more hash where you get that? a 1080ti is 80% more faster than a 1070 not 1060, maybe you are confusing with the 1080s
i used 2 recources for the comparsion:
whattomine.com
1060 - Ethhash: 21.3 Mh/s
1070 - Ethhash: 30.0 Mh/s
1080Ti - Ethhash: 35.0 Mh/s
https://www.nicehash.com/?p=calc
1060 - DaggerHashimoto: 20.13 MH/s
1070 - DaggerHashimoto: 28.69 MH/s
1080Ti - DaggerHashimoto: 35.00 MH/s
are both pages wong with the Ti?
for my 30 1060 the result is nearly as stated there.
i believe that the 1080ti is the better deal here, the 1060 is very poor in performance, and it's also overpriced like the other, but the 1080ti is less overpriced compared to the other, because the price was already high, before the gpu shortage, i would just buy two 1080ti for now, versus 6 x 1060
No way.
1080ti compared to 1060 3GB is just 80% more Hashpower but 250% "more Price" and 150% more power consumption.
lol no it's not 80% more hash where you get that? a 1080ti is 80% more faster than a 1070 not 1060, maybe you are confusing with the 1080s
Jump to: