Is this a private miner?
Which setting give u 37-40 Mhs on LUX if it is a public miner?
Yes, spmod.
Topic: 1080Ti Specific - Best mining option - page 100. (Read 409677 times)
Is this a private miner?
Which setting give u 37-40 Mhs on LUX if it is a public miner?
Yes, spmod.
Lux coin 
1 ti = 37-40 mh\s
1080 = 26-28 mh\s
1 ti = 37-40 mh\s
1080 = 26-28 mh\s
Is this a private miner?
Which setting give u 37-40 Mhs on LUX if it is a public miner?
Lux coin
1 ti = 37-40 mh\s
1080 = 26-28 mh\s
1 ti = 37-40 mh\s
1080 = 26-28 mh\s
Need an advice
Do my corsair rm1000x can handle 3x 1080ti?
You can use it, but you have to low PL to 70-80% for most cards. With 100% PL your PSU will work at 95-100% of it max capacity and it will not be good to it. Do my corsair rm1000x can handle 3x 1080ti?
For NVidia XZC mining use the latest CUDA9, x86 ccminer from tpruvot (currently 2.2.3) https://github.com/tpruvot/ccminer/releases
Don't forget to add
Don't use djm34 miner. It shows higher hashrate on miner, but actually performs worse in MPH.
It keep submitting previous job after block was mined. MPH actually rejects it but don't report it to the miner, just increases "invalid shares" counter.
Don't forget to add
Code:
--submbit-stale
parameter to BAT file. It will increase your hashrate at MPH a little bit too.Don't use djm34 miner. It shows higher hashrate on miner, but actually performs worse in MPH.
It keep submitting previous job after block was mined. MPH actually rejects it but don't report it to the miner, just increases "invalid shares" counter.
I try --submbit-stale but it always say unknown option, even with the one you linked
is it safe to connect 1080ti thru one cable using spliiter so one cable connects two pcie on card when using 65% power settings
You mean like this
I've been powering my 1080ti's like that for 6 months now without a problem. Cables don't even get a little hot even at 75% TDP.
I thought it was unsafe to do this for video cards drawing more than 200W?
that depends more on the quality of cable. good quality 16awg wiring can handle 300W+, while lower quality power supplies may get hot wires above 200W. at 75% tdp the card should draw less than 200w
is it safe to connect 1080ti thru one cable using spliiter so one cable connects two pcie on card when using 65% power settings
You mean like this
I've been powering my 1080ti's like that for 6 months now without a problem. Cables don't even get a little hot even at 75% TDP.
yep like that. cool thanks for reply
is it safe to connect 1080ti thru one cable using spliiter so one cable connects two pcie on card when using 65% power settings
You mean like this
https://i.imgur.com/MO91JuG.jpg
I've been powering my 1080ti's like that for 6 months now without a problem. Cables don't even get a little hot even at 75% TDP.
I thought it was unsafe to do this for video cards drawing more than 200W?
Need an advice
Do my corsair rm1000x can handle 3x 1080ti?
Do my corsair rm1000x can handle 3x 1080ti?
No issues at all for me.
I have 3 cards @ 75% tdp, about 190-200w each so say 600w for the cards, around 100-200w for the system depending on what you have, so you're under 800w, so you still have that 20% safety of a 1000w PSU running at 80% load.
Thanks mate
Need an advice
Do my corsair rm1000x can handle 3x 1080ti?
Do my corsair rm1000x can handle 3x 1080ti?
No issues at all for me.
I have 3 cards @ 75% tdp, about 190-200w each so say 600w for the cards, around 100-200w for the system depending on what you have, so you're under 800w, so you still have that 20% safety of a 1000w PSU running at 80% load.
Need an advice
Do my corsair rm1000x can handle 3x 1080ti?
Do my corsair rm1000x can handle 3x 1080ti?
+1 I am curious too, currently running 2 on it, thinking about adding another one.
Need an advice
Do my corsair rm1000x can handle 3x 1080ti?
Do my corsair rm1000x can handle 3x 1080ti?
is it safe to connect 1080ti thru one cable using spliiter so one cable connects two pcie on card when using 65% power settings
You mean like this
I've been powering my 1080ti's like that for 6 months now without a problem. Cables don't even get a little hot even at 75% TDP.
Anyone still mining with 1080ti after nicehash gone online again ?
nope, we all sold our 1080Ti ! Damn Nicehash !I guess I am too late to the party
mining with a 1080Ti (and any other GPU) has nothing to do with any pool, so of course we are still mining with our 1080Ti.
Then a very noob question comes next. Is it profitable to run 2x1080ti on awesomeminer ? Should I mine an specific coin or use auto exchanges ? Any advices to a 1080ti noob with the current mining situation ?
P.S. enjoying my 1080ti to play, but want to get into the cryptocoin world
Anyone still mining with 1080ti after nicehash gone online again ?
nope, we all sold our 1080Ti ! Damn Nicehash !I guess I am too late to the party
mining with a 1080Ti (and any other GPU) has nothing to do with any pool, so of course we are still mining with our 1080Ti.
Anyone still mining with 1080ti after nicehash gone online again ?
nope, we all sold our 1080Ti ! Damn Nicehash !I guess I am too late to the party
Anyone still mining with 1080ti after nicehash gone online again ?
nope, we all sold our 1080Ti ! Damn Nicehash !
Anyone still mining with 1080ti after nicehash gone online again ?
Hi,
I get 0,03 XZC with 2x GTX 1080 ti.
Is that normal ?!
What do you get for 1 1080ti and which pool do you use?
On whattomine I should get arround 0,145 -_-
I get 0,03 XZC with 2x GTX 1080 ti.
Is that normal ?!
What do you get for 1 1080ti and which pool do you use?
On whattomine I should get arround 0,145 -_-
someone can say anything ?
Hey ppl,
What do you mine right now? nist5, blake2s, something else?
What do you mine right now? nist5, blake2s, something else?
play games!
Jump to: