Topic: 1080Ti Specific - Best mining option - page 201. (Read 409660 times)
What are good pools for Zcoin?
Guys for Zcoin djm34's version works as advertised. Hash rate 2400kh/s and is reflected accurately in MPH.
Using ccminerx64-2.2, hash rate is 2.7K, but on pool the actual hash is 40% lower.
The earnings are slightly lower than Skein, but after factoring electricity cost, Zcoin is the winner.
Using ccminerx64-2.2, hash rate is 2.7K, but on pool the actual hash is 40% lower.
The earnings are slightly lower than Skein, but after factoring electricity cost, Zcoin is the winner.
thx for this, I will give it a try.
the power / temp difference is huge.
On lyra2z i have the fans set to 30% and cards are at 60C.
Nobody is mining Vert Coin with the 1080ti's? I think it's a pretty decent option atm.
Guys for Zcoin djm34's version works as advertised. Hash rate 2400kh/s and is reflected accurately in MPH.
Using ccminerx64-2.2, hash rate is 2.7K, but on pool the actual hash is 40% lower.
The earnings are slightly lower than Skein, but after factoring electricity cost, Zcoin is the winner.
Using ccminerx64-2.2, hash rate is 2.7K, but on pool the actual hash is 40% lower.
The earnings are slightly lower than Skein, but after factoring electricity cost, Zcoin is the winner.
hehe, i think he made a mistake ;p
the 1070ti, tho pretty much confirmed at this point is pretty hush hush, see my thread for speculation/latest news there
i mean i would love to be wrong and this guy has one in hand but i doubt it ;p
anyone mining zcoin for a node/MTP pump? seems they borked the chain with recent update, check your earnings! Oc noticed it
Good luck to all haha
the 1070ti, tho pretty much confirmed at this point is pretty hush hush, see my thread for speculation/latest news there
i mean i would love to be wrong and this guy has one in hand but i doubt it ;p
anyone mining zcoin for a node/MTP pump? seems they borked the chain with recent update, check your earnings! Oc noticed it
Good luck to all haha
I have been mining ZEN on Zhash and Luckpool. My stats are below:
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
Those seem like pretty horrid numbers...
I have been mining ZEN on Zhash and Luckpool. My stats are below:
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
1070 ti?
I didn't think the 1070 Ti was out yet... unless you managed to get an engineering or media test sample? It should drop on Oct. 26 according to this article: http://www.guru3d.com/news_story/geforce_gtx_1070_ti_launch_date_october_26th_specs_and_details.html
I'm hoping that it will drop the prices on GTX 1070s down to where they were at the start of summer.... which would make many gamers (and miners) happy.
I have been mining ZEN on Zhash and Luckpool. My stats are below:
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070Ti. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
1070 ti?
I have been mining ZEN on Zhash and Luckpool. My stats are below:
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
So an average of $36.80 per day. On luckpool it was $24.65 per day, on Zhash it was $41.18, so that's why I switched back.
It was done using 15x 1080Ti and 2x 1070. To make it easy, lets just say it was done with 16x 1080Ti. That works out to $2.3 per card, which I think is about all anyone is going to make using a 1080Ti atm unfortunately. I'm using a ZEN value of $8.14.
GPU: MSI GTX 1080Ti AERO
PSU: RM750x (dual setup), GPU powered 2+2, 2+3, 3+3
All cards are set to 130W power limit.
PSU: RM750x (dual setup), GPU powered 2+2, 2+3, 3+3
All cards are set to 130W power limit.
What power supply do you have vs what cards?
Is it normal that hashrate per card decrease with more GPUs attached to single MB ?
I have 3 systems for testing, each with 4/5/6 GPUs configuration running on identical HW, SW.
Each card is attached via powered riser (they are not all same, different batches) to PCIe x1 slot.
I can see that system with 4 cards performs best in the meaning of hashrate per card, 2nd is 5GPU and 3rd is 6GPU.
Difference on equihash algo with ccminer 2.2.0 on linux is ~10% (best/worst).
What could be a bottleneck ?
It is not really a problem but I would like to know why it performs like that.
I have 3 systems for testing, each with 4/5/6 GPUs configuration running on identical HW, SW.
Each card is attached via powered riser (they are not all same, different batches) to PCIe x1 slot.
I can see that system with 4 cards performs best in the meaning of hashrate per card, 2nd is 5GPU and 3rd is 6GPU.
Difference on equihash algo with ccminer 2.2.0 on linux is ~10% (best/worst).
What could be a bottleneck ?
It is not really a problem but I would like to know why it performs like that.
ZCOIN is really nice for the low power consumption and heat produced. Whenever we have tried it in the past though the resulting payments are far lower then any estimates. I'm not sure if that's due to miner software or pools being messed up..... I'm curious to see what you guys report on zpool after a couple of days mining there. Hopefully with the modified ccminer it will perform as expected.
What miner is giving you 3400?.
ccminer2.0rc2 cuda 6.5
You sure suprnova is good ?
It seems to give me less than wtm says.
zpool is good ?
I'm getting 2.7kh/s. FE 1080ti +160 core, 0 mem, 80%PL. It hovers at 57% Power however. Trying it out on mph.
Using the ccminer-x64 2.2 that came with SIGT miner.
By the way, Skein is making only 5% less, though it uses 200W vs 135W.
What miner is giving you 3400?.
ccminer2.0rc2 cuda 6.5
You sure suprnova is good ?
It seems to give me less than wtm says.
zpool is good ?
All current options are terrible.
Suprnova -> I get more coins than in MPH when is working, but stop working very often, so the final result is worse.
MPH -> see zcoin's thread, people no happy with the reported hash v.s. miner hash
zpool -> the owner just re-started this algo two/three days ago, so no many blocks
The best is that you try to see what fits better for you.
What miner is giving you 3400?.
ccminer2.0rc2 cuda 6.5
You sure suprnova is good ?
It seems to give me less than wtm says.
zpool is good ?
These are the results I get as well with Djm34 'official' version. With Tpruvot's version I get about 2950, but MPH accepts only about 80% of that.
Power usage is fine as well. This is the real nice thing of algo lyra2z.
I use this one : https://github.com/djm34/ccminer-msvc2015/releases/
tested with this one too, same 2500 hashrate : https://github.com/Tourgasm/xzc-ccminer/releases/
Don't understand such a difference with you
What intensity do you set for the miner ? it's 16 by defautl, I can't go higher than 20, higher it crashes
Edit : okay my miners were wrong.
The good one gives me 3400 khs !!!
That's djm34's I was talking about. As I said before, I get the same as you running in linux.
It's tpruvot's that gives higher hashes, but there's something wrong in it that makes the pools accept much less hashes. Please, take a look at the final pages of zcoin's thread for more information.
What miner is giving you 3400?.
These are the results I get as well with Djm34 'official' version. With Tpruvot's version I get about 2950, but MPH accepts only about 80% of that.
Power usage is fine as well. This is the real nice thing of algo lyra2z.
Oookay my miners were wrong.
The good one gives me 3400 khs !!!
Edit : Is it usefull to overclock memory too for this algo ?
optimizing for lyra2z, does it react to core, memory or none?
Loving this algo, 1080ti does great on it and cards stay very cool.
getting ~3000kh/s on msi aero 1080ti oc
Loving this algo, 1080ti does great on it and cards stay very cool.
getting ~3000kh/s on msi aero 1080ti oc
Which pool do you mine and what is your current settings?
Miningpoolhub
ccminer 2.2 x86
cminer -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u x -p x --cpu-priority=3
384.94 driver / win 10 ltsb 2016 x64
MSI 1080ti aero oc
PL 110
core + 160
mom - 300
fan 40%
temp 58C
not sure if the core oc is necessary at all, those were the skunkhash settings and i just switched algo.
Why u mine on miningpoolhub that doesnt accept all ur hashrate? U mine 30% less then u should. Their pool is retarded unfortunately
I just noticed that too
Usually I am very happy with mph, but it seems their zcoin one is broken.
Only reporting 8mh/s while i have 12.
is supernova mining Z[Suspicious link removed]d ?
how do you get 3000 k/hs ?
I only get 2500 khs with my aorus 1080TI, +100 core + 400 mem, NVIDIA 385.41 driver
but the power usage is only 52% in afterburner..( even is card set to 100% =
Anyone can help me ?
These are the results I get as well with Djm34 'official' version. With Tpruvot's version I get about 2950, but MPH accepts only about 80% of that.
Power usage is fine as well. This is the real nice thing of algo lyra2z.
optimizing for lyra2z, does it react to core, memory or none?
Loving this algo, 1080ti does great on it and cards stay very cool.
getting ~3000kh/s on msi aero 1080ti oc
Loving this algo, 1080ti does great on it and cards stay very cool.
getting ~3000kh/s on msi aero 1080ti oc
Which pool do you mine and what is your current settings?
Miningpoolhub
ccminer 2.2 x86
cminer -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u x -p x --cpu-priority=3
384.94 driver / win 10 ltsb 2016 x64
MSI 1080ti aero oc
PL 110
core + 160
mom - 300
fan 40%
temp 58C
not sure if the core oc is necessary at all, those were the skunkhash settings and i just switched algo.
Why u mine on miningpoolhub that doesnt accept all ur hashrate? U mine 30% less then u should. Their pool is retarded unfortunately
I just noticed that too
Usually I am very happy with mph, but it seems their zcoin one is broken.
Only reporting 8mh/s while i have 12.
is supernova mining Zcoin good ?
how do you get 3000 k/hs ?
I only get 2500 khs with my aorus 1080TI, +100 core + 400 mem, NVIDIA 385.41 driver
but the power usage is only 52% in afterburner..( even is card set to 100% =
Anyone can help me ?
Jump to: