Author

Topic: 1080Ti Specific - Best mining option - page 286. (Read 409677 times)

legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
July 15, 2017, 02:05:45 PM
Have 1080Ti Palit SJS and got about 730 sol/s on Win10 with 230W power consumption (1860 MHz/5650 MHz/925 mV Core/Memory/voltage). But somebody report about 770-800 Sol/s on equihash. What settings shoud be used?

you will only get 770-800 on the top of the line cards, zotacs and aurous i believe. PLus honestly, its not worth the power consumption, you should look for around 700 sol/s and 80% or less TDP, whatever settings work, noone has magic numbers for you, my zotac is at +0/+0 right now for 700 sol/s and 200 watts Grin
full member
Activity: 405
Merit: 136
July 15, 2017, 12:45:18 PM
Have 1080Ti Palit SJS and got about 730 sol/s on Win10 with 230W power consumption (1860 MHz/5650 MHz/925 mV Core/Memory/voltage). But somebody report about 770-800 Sol/s on equihash. What settings shoud be used?
legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
July 15, 2017, 11:48:57 AM
what else are you mining guys? im mining and holding skein for 2 weeks now..

me too, i'm holding to another day of crazy market, so if we sell DGB for 0,00001BTC it'll be terrific

Mainly mining eth for my AMD farm and holding. For my 1080ti farm, mining what's most proffitable and dumping into USD. But these few days I am holding the mined btc since they are relatively cheap compared to recent times. May acquire up to 2 btc before dumping mined coins again.

i have been holding my LBC, hoping to see ROI on my little ti farm (just 7 cards), when/if it hits 20k again inna month or 2
if it hits 10k ill dump maybe tho, not much else one CAN do to try stay in the money nowadays :/
i think its smart to hold your ETH, all my AMD has been liquidated or i would do the same
it WILL pump again one day for SURE imo
newbie
Activity: 37
Merit: 0
July 15, 2017, 09:53:14 AM
So c11 looked to be real good at 9$ish a card but then the coin crashed hard to bad
full member
Activity: 168
Merit: 100
July 15, 2017, 08:41:15 AM
what else are you mining guys? im mining and holding skein for 2 weeks now..

me too, i'm holding to another day of crazy market, so if we sell DGB for 0,00001BTC it'll be terrific

Mainly mining eth for my AMD farm and holding. For my 1080ti farm, mining what's most proffitable and dumping into USD. But these few days I am holding the mined btc since they are relatively cheap compared to recent times. May acquire up to 2 btc before dumping mined coins again.


It seems like- it'll be more profitable if a person buys BTC then holds it then mining lol considering the stuff happening. If the drop of BTC doesn't stop at $1840 it could get ugly real quick.

sr. member
Activity: 610
Merit: 265
July 15, 2017, 01:05:19 AM
what else are you mining guys? im mining and holding skein for 2 weeks now..

me too, i'm holding to another day of crazy market, so if we sell DGB for 0,00001BTC it'll be terrific

Mainly mining eth for my AMD farm and holding. For my 1080ti farm, mining what's most proffitable and dumping into USD. But these few days I am holding the mined btc since they are relatively cheap compared to recent times. May acquire up to 2 btc before dumping mined coins again.
newbie
Activity: 33
Merit: 0
July 14, 2017, 06:29:03 PM
what else are you mining guys? im mining and holding skein for 2 weeks now..

me too, i'm holding to another day of crazy market, so if we sell DGB for 0,00001BTC it'll be terrific
legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
July 14, 2017, 04:21:36 PM
I have 4 1080tis, one gigabyte and 3 zotac. I can adjust the fan speed to gigabyte but the zotacs won't adjust.

has anyone faced something similar? using afterburner  Huh

i think the zotac has an under 60 degrees override on fan, install that Zotac OC softwear and you can disable it, then use afterburner freely Smiley
but i think you HAVE to install that Zotac program to disable that fan control

full member
Activity: 287
Merit: 100
July 14, 2017, 03:43:55 PM
I have 4 1080tis, one gigabyte and 3 zotac. I can adjust the fan speed to gigabyte but the zotacs won't adjust.

has anyone faced something similar? using afterburner  Huh
full member
Activity: 168
Merit: 100
July 14, 2017, 10:48:36 AM
So DGB is a full hardcore downtrend and has been for quite a while ,

ZEC - has been disabled by Polnoneix for withdraw or deposit

BTC - looks like it's in a descending triangle- now I HOPE it turns out Bullish- if it does - everyone who has not switched BTC into USD so far will earn big-however, if it breaks down-sell yo house n shoes.  Trading range is getting narrow and narrower. Fingers crossed for upside break with conviction.
member
Activity: 194
Merit: 12
Trust me. I'm a holder.
July 14, 2017, 06:45:48 AM
hey guys i have a 1080ti and i want dgb skein of yiimp.pool ccminer pls share miner settings?

It is:

ccminerAlexis78.exe -a skein -o stratum+tcp://yiimp.ccminer.org:4933 -u DGB_Wallet_Address u -p c=DGB,skien,stats

assuming miner is Alexis version.

thank you Smiley
sr. member
Activity: 382
Merit: 251
July 14, 2017, 05:15:49 AM
hey guys i have a 1080ti and i want dgb skein of yiimp.pool ccminer pls share miner settings?

It is:

ccminerAlexis78.exe -a skein -o stratum+tcp://yiimp.ccminer.org:4933 -u DGB_Wallet_Address u -p c=DGB,skien,stats

assuming miner is Alexis version.
member
Activity: 194
Merit: 12
Trust me. I'm a holder.
July 14, 2017, 04:56:08 AM
hey guys i have a 1080ti and i want dgb skein of yiimp.pool ccminer pls share miner settings?
full member
Activity: 302
Merit: 102
Mining with noise and without noise is all possibl
July 13, 2017, 11:12:01 AM
Maybe can do group purchase. Lol....

Not a bad idea  Grin

The difficulty jump and the amount of HASH makes it too risky - I bought it, and watched while the wallet installed the difficulty rise. Ultimately I wish there was a group purchase available. Make me an offer guys - I am not, nor will not mine it if someone gives me a decent offer.

I was joking....

Frankly i wont pre paid for it. As you said just too risky with so many unknow. I responded to SP with the same too.

Maybe upon using n proven ok then donate that can be considered. Ops. Sorry.

Else we just hv to deal with keep searching for other coins to mine and keep
newbie
Activity: 29
Merit: 0
July 13, 2017, 10:33:51 AM
Maybe can do group purchase. Lol....

Not a bad idea  Grin

The difficulty jump and the amount of HASH makes it too risky - I bought it, and watched while the wallet installed the difficulty rise. Ultimately I wish there was a group purchase available. Make me an offer guys - I am not, nor will not mine it if someone gives me a decent offer.
sr. member
Activity: 382
Merit: 251
July 13, 2017, 08:30:40 AM
Maybe can do group purchase. Lol....

Not a bad idea  Grin
full member
Activity: 302
Merit: 102
Mining with noise and without noise is all possibl
July 13, 2017, 08:18:59 AM
SP model is clearly not suitable for newbie and single or only few cards.
It's just not optimize.

Maybe can do group purchase. Lol....
full member
Activity: 192
Merit: 100
July 13, 2017, 04:02:10 AM
If anyone wants to purchase the SP spreadcoin private miner at a discount price ($15 profit per 1080ti, $9 profit per 1070, 5$ profit per 1060) I'm selling it for half price 0.025 BTC

my btc address: 3Dt62uBuNCDxHcA8cFxaaJHZjtAufoq7EP

Send me a PM with your email and I will send it out to you.

So _at this time_ it is still making 15 usd per day? Can we see proof first?

It was making 15$ per day for about 2 days.  Not enought  time to make back you $180 USD unless you have like 10 1080ti's.
full member
Activity: 192
Merit: 100
July 13, 2017, 03:58:24 AM
The profit has declined to $5.7 per day per 1080ti..

Spreadminer sp-mod #11 abit faster



I would call it even less than that.  went 48 hours only found one block with 6 1080ti's.  I was working ok when difficulty was down.   Far too risky to drop $180 US dollars on a miner for the profits to fall away in a day.  You need a new way to implement your mods SP.  It's jsut too risky.
member
Activity: 84
Merit: 11
July 12, 2017, 05:58:11 PM
do you guys keep your voltages and clocks fixed or leave them fluctuate?

Overclock and limit TDP, it ends up being equivalent to undervolting.
Jump to: