mdude77,
Just sent another 165,000 FSC to your donation address. Transaction ID: 098ae49ee5b97f3acacfcc207922b81ff874eab88a80ddacef16180c8ea57d8c
Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 373. (Read 2591964 times)
I installed p2pool 2 days ago and still no payment.
I see the past two days no block has been found.
I assume today or tomorrow 1 or 2 blocks will be found and get payouts.
Which brings me to the next question.
How many blocks is p2pool is trying to discover at the same time?
I see the past two days no block has been found.
I assume today or tomorrow 1 or 2 blocks will be found and get payouts.
Which brings me to the next question.
How many blocks is p2pool is trying to discover at the same time?
so tell me what did happen, when you undervolaged.
less shares or more? why
if i put my ants to the limit theres no gain, vs 180gh.
i can laugh, because it seems to me that theres no gain going over 0.83v/275mhz/ 1.1v/350mhz
you only use more power, much more power.
350mhz is like 180gh with 360w
275mhz is like 140gh with 160w
less shares or more? why
if i put my ants to the limit theres no gain, vs 180gh.
i can laugh, because it seems to me that theres no gain going over 0.83v/275mhz/ 1.1v/350mhz
you only use more power, much more power.
350mhz is like 180gh with 360w
275mhz is like 140gh with 160w
The question is the cost in electricity worth the difference? At 200 gh/s my S1 costs me about $34 a month in electricity. The difference between 200 and 140gh/s is about
M
Quote from: bitdigger2013 link=topic=18313.msg7181252#msg7181252
I have only 6 peers out, could this be an issue?
6 is the default, it is plenty, max should be 10 not sure how/why you would go to 20...
Version: 13.4-24-gf0eeb48-dirty
Pool rate: 537TH/s (12% DOA+orphan) Share difficulty: 1570000
Node uptime: 12.9 hours Peers: 20 out, 0 in
Local rate: 415GH/s (0.0% DOA) Expected time to share: 4.5 hours
Shares: 7 total (0 orphaned, 0 dead) Efficiency: 113.3%
Payout if a block were found NOW: 0.01278865 BTC to 1KUeBzZEtGdupam6bK4VfEHFXJhk1C7XCn. Expected after mining for 24 hours: 0.0193 BTC per block.
Current block value: 25 BTC Expected time to block: 1.1 days
Pool rate: 537TH/s (12% DOA+orphan) Share difficulty: 1570000
Node uptime: 12.9 hours Peers: 20 out, 0 in
Local rate: 415GH/s (0.0% DOA) Expected time to share: 4.5 hours
Shares: 7 total (0 orphaned, 0 dead) Efficiency: 113.3%
Payout if a block were found NOW: 0.01278865 BTC to 1KUeBzZEtGdupam6bK4VfEHFXJhk1C7XCn. Expected after mining for 24 hours: 0.0193 BTC per block.
Current block value: 25 BTC Expected time to block: 1.1 days
I have only 6 peers out, could this be an issue?
see after xxxx if you have those, recseck becaus 2.8-3.0
and it wont help to pull one cord off , shut down the psu ....
and it wont help to pull one cord off , shut down the psu ....
i noticed that the carpenter pencil is the worst to use but result is best ?
its like 0.1€/kwh here in finland, do the math.
I just told you what ive done, P2pool is great
if you regret or think you have done something bad use your finger or rubber to clean it off?
its like 0.1€/kwh here in finland, do the math.
I just told you what ive done, P2pool is great
if you regret or think you have done something bad use your finger or rubber to clean it off?
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
Thanks! I am going to give it a try 
.
Kindly,
Muhammed Zakhir
.Kindly,
Muhammed Zakhir
Those ants are relly good, for hunting a block - not for ghashshio
Thank god for those good Linux things
Thank god for those good Linux things
4x ants 
Version: 13.4-24-gf0eeb48-dirty
Pool rate: 537TH/s (12% DOA+orphan) Share difficulty: 1570000
Node uptime: 12.9 hours Peers: 20 out, 0 in
Local rate: 415GH/s (0.0% DOA) Expected time to share: 4.5 hours
Shares: 7 total (0 orphaned, 0 dead) Efficiency: 113.3%
Payout if a block were found NOW: 0.01278865 BTC to 1KUeBzZEtGdupam6bK4VfEHFXJhk1C7XCn. Expected after mining for 24 hours: 0.0193 BTC per block.
Current block value: 25 BTC Expected time to block: 1.1 days
Pool rate: 537TH/s (12% DOA+orphan) Share difficulty: 1570000
Node uptime: 12.9 hours Peers: 20 out, 0 in
Local rate: 415GH/s (0.0% DOA) Expected time to share: 4.5 hours
Shares: 7 total (0 orphaned, 0 dead) Efficiency: 113.3%
Payout if a block were found NOW: 0.01278865 BTC to 1KUeBzZEtGdupam6bK4VfEHFXJhk1C7XCn. Expected after mining for 24 hours: 0.0193 BTC per block.
Current block value: 25 BTC Expected time to block: 1.1 days
Keep it running, with 0.1 fees and enjoy shares?
Can you cheat the god? with overclkoojgdgjing?
It was like 15 yeara ago I couldnt understand oc dilemma?
I still cant but I realize its there!
Can you cheat the god? with overclkoojgdgjing?
It was like 15 yeara ago I couldnt understand oc dilemma?
I still cant but I realize its there!
I cant say anything else, but dont overclock - but try it if you dont belive...
hw errors doesnt really tell anything - but try it.
i get 2x hashrate, with ants 2.8-3 kohms its really worth it, i hve 4 ants
its annoying to understand things when you leave the best pool there is
hw errors doesnt really tell anything - but try it.
i get 2x hashrate, with ants 2.8-3 kohms its really worth it, i hve 4 ants
its annoying to understand things when you leave the best pool there is
Hi,
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
Variance. You need 3 days to fill out your PPLNS share queue-- so you are only at 1.2/3 = 0.4 of your expected block payout. You had bad luck for 1.2 days, you could do much better. I have been purring along at 530GH/s and per-block between 0.02 to 0.028 the past several blocks.
Anything I should be tuning on my end? or just need to have luck average out over time?
Hi,
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
Variance. You need 3 days to fill out your PPLNS share queue-- so you are only at 1.2/3 = 0.4 of your expected block payout. You had bad luck for 1.2 days, you could do much better. I have been purring along at 530GH/s and per-block between 0.02 to 0.028 the past several blocks.
Hi,
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
Need some advice on if this seems right. I have been running on my own node for 1.2 days at 1.2 TH and my result so far does not seem right.
Local rate: 1.20 TH/s (DOA 38.57 GH/s / 3.51%) Shares: Total: 12 (Orphan: 1, Dead: 0)
Expected payout: 0.01571202
is this just variance related or an obvious issue with my node?
was getting .04+ daily with ghash.io
so tell me what did happen, when you undervolaged.
less shares or more? why
if i put my ants to the limit theres no gain, vs 180gh.
i can laugh, because it seems to me that theres no gain going over 0.83v/275mhz/ 1.1v/350mhz
you only use more power, much more power.
350mhz is like 180gh with 360w
275mhz is like 140gh with 160w
less shares or more? why
if i put my ants to the limit theres no gain, vs 180gh.
i can laugh, because it seems to me that theres no gain going over 0.83v/275mhz/ 1.1v/350mhz
you only use more power, much more power.
350mhz is like 180gh with 360w
275mhz is like 140gh with 160w
https://bitcointalksearch.org/topic/guide-undervolt-antminer-s1-119wgh-at-the-wall-526060
Go ahead for gh/ ghash pays for it, and you pay for nothing.
Stupid pays for nothing, pretty soon its going to go down with this shit, like 200gh with 180 gear.
One can imagine of 200gh rate with 2x 70 blades.
Ofcourse you can put it how high its possible to read the stats, but its the thuth that its only 2x 70 that ant s1 is
There might be a slight possibility that you hit a diamond when going high, but i dont takr my bets on it.
One cant fool P2pool, because....
i have many pictures of shares how in hte earth i can paste it ..
This P2pool seems to be foolproof, thank you for it.
Stupid pays for nothing, pretty soon its going to go down with this shit, like 200gh with 180 gear.
One can imagine of 200gh rate with 2x 70 blades.
Ofcourse you can put it how high its possible to read the stats, but its the thuth that its only 2x 70 that ant s1 is
There might be a slight possibility that you hit a diamond when going high, but i dont takr my bets on it.
One cant fool P2pool, because....
i have many pictures of shares
how in hte earth i can paste it ..This P2pool seems to be foolproof, thank you for it.
it works like a charm here, but i cant say if it works for you, join to my node.
just now i realised its not possible
I get 2x for what im supposed to
just now i realised its not possible
I get 2x for what im supposed to
Im not sure of this , but if you overclock something are you sure its good for your brains - those might melt.
Im getting more results here with undervoltaging, might be wrong - you tell me.
1.6kw -> 600w with ants, i love ants!
just have to use pencil, and a volt meter. works here
https://bitcointalksearch.org/topic/guide-undervolt-antminer-s1-119wgh-at-the-wall-526060
Im getting more results here with undervoltaging, might be wrong - you tell me.
1.6kw -> 600w with ants, i love ants!
just have to use pencil, and a volt meter. works here
https://bitcointalksearch.org/topic/guide-undervolt-antminer-s1-119wgh-at-the-wall-526060
Jump to: