Pages:
Author

Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 93. (Read 2591920 times)

legendary
Activity: 1308
Merit: 1011
I've been reading about this p2pool difficulty scaling issue. It said the more hash power being put in, the more harder it gets and by the time it is high enough, it will be like solo mining.
This applies to any variant of mining, including a solo.
Nonsense. Pooled mining is nothing like that, except in the case of p2pool.
What nonsense? Difficulty is increased not by all miners, but only by those who added the extra power. With increasing difficulty of the coin in any type of the pool, those who did not extend their power will receive a smaller payment.
And this situation is both in p2pools and in the regular pools and in solo mode. If you want to get more benefits or to stay in the same level - increase the power of your equipment.
member
Activity: 88
Merit: 10
Don't you think it is better to ask your group first before you ask here lol?
the one that you list going to contribute around 1000 th/s?

I've been seeing the p2pool hash is always around 500 - 1000 th/s for quite sometime even before you post this.
there's a spike of hash power increase yesterday but only like 12 hour duration and it drop again like usual. So where is this hash power that you are talking about.
Don't u think the global p2pool hash should be 1500++ th/s if its all goes to p2pool ?
On the forum, except some enthusiasts, the same talkers as here.
Goodbye.
newbie
Activity: 48
Merit: 0
I have question to all forum member.
Why do you use p2pool if you don't want to make efforts.
Everyone knows that to be successful you need the power, but nobody wants to give. We have collected more 200Th, and you are left with p2pool. Look at the graph of power pool!
What happend? Tell me please!

Don't you think it is better to ask your group first before you ask here lol?
the one that you list going to contribute around 1000 th/s ?

I've been seeing the p2pool hash is always around 500 - 1000 th/s for quite sometime even before you post this.
there's a spike of hash power increase yesterday but only like 12 hour duration and it drop again like usual. So where is this hash power that you are talking about.
Don't u think the global p2pool hash should be 1500++ th/s if its all goes to p2pool ?
member
Activity: 88
Merit: 10
I have question to all forum member.
Why do you use p2pool if you don't want to make efforts.
Everyone knows that to be successful you need the power, but nobody wants to give. We have collected more 200Th, and you are left with p2pool. Look at the graph of power pool!
What happend? Tell me please!
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
ck, could you kind enough to explain to me about this scaling issue, preferably in noob wording lol...
In a regular pool, the more hashrate the pool has, the less variation there is in each miner's payouts. In p2pool it is biphasic. Initially as the hashrate of the pool increases your variation decreases, and then as the hashrate gets larger again, variation starts increasing again. If all miners were on p2pool, it'd be like they were solo mining at 1/20th of the current network diff which would be horrific variation. It's one of the limitations of the p2pool design that's been talked about, thrashed out and debated about for years on end without a solution.
newbie
Activity: 48
Merit: 0
I've been reading about this p2pool difficulty scaling issue. It said the more hash power being put in, the more harder it gets and by the time it is high enough, it will be like solo mining.
This applies to any variant of mining, including a solo.
Nonsense. Pooled mining is nothing like that, except in the case of p2pool.

ck, could you kind enough to explain to me about this scaling issue, preferably in noob wording lol...
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
I've been reading about this p2pool difficulty scaling issue. It said the more hash power being put in, the more harder it gets and by the time it is high enough, it will be like solo mining.
This applies to any variant of mining, including a solo.
Nonsense. Pooled mining is nothing like that, except in the case of p2pool.
legendary
Activity: 1308
Merit: 1011
I've been reading about this p2pool difficulty scaling issue. It said the more hash power being put in, the more harder it gets and by the time it is high enough, it will be like solo mining.
This applies to any variant of mining, including a solo.
member
Activity: 88
Merit: 10
If you want to be a businessman you have to make a business. All of us have to put all his power to p2pool NOW! When you deside to connect to p2pool may be late. Time is very quickly thing.
newbie
Activity: 48
Merit: 0
Sorry for this noob question.
I've been reading about this p2pool difficulty scaling issue. It said the more hash power being put in, the more harder it gets and by the time it is high enough, it will be like solo mining.

If this is the case, is there really nothing that could be done ?

It would be nice if there's a fix to this problem and maybe one day we can see p2pool global hashrate can reach maybe 100-200 Ph/s across all available node.
member
Activity: 88
Merit: 10
Hi, kids!
Are you ready to rock&roll?
member
Activity: 88
Merit: 10
Hello.
To connect to p2pool via proxy on our server. Write to me in PM your wallet address. In response you will receive the address with Your port. For example: che2pool.mine.nu:3345. Control of work at: http://che2pool.mine.nu:9332/
As a backup we recommend you to choose the nearest any other p2pool node. Select the node for the ping here http://poolnode.info/
The meaning of proxy fixes antminer software when working on p2pool'e and aggregation capacity to improve the effectiveness of the story in this case appears as one with great power and work on one wallet.
Gradually, the power to enter makes no sense. No time to wait. Either connect immediately or not do it at all. Note that in the case of partial connection of your remaining miners will compete and interfere with the fact that connected to p2pool! The efficiency of your miners and the pool will be severely reduced. The lack of power in p2pool 10% will reduce the chance of success many times more. Look at the graph of this purse 1DaDnQK8GyCuAtdAfBubBYAehjY5gCpGsb (http://che2pool.mine.nu:9332/). There are some S7 are stable for many days. You already ran all the tests! Periodically, about once or twice a day on the settings page of the miner to click Save&Apply. Happens restarting cgminer daemon without rebooting the miner. If the miner working steadily at a frequency of about 4.7 Th and makes too many errors, and to restart it is not necessary. About three days wallet will only acquire shares. Therefore, the block need to be ready to get high. See weekly charts of the miners on the node, increasing the expected payout. http://che2pool.mine.nu:9332/...
It is our wishes.
Good luck!
member
Activity: 88
Merit: 10
At March 26, we will plug on all power on p2pool. Join us!
The more we have, the more luck! Even one miner could turn the tide!
For those interested we can arrange a port to the proxy. Write in PM.
legendary
Activity: 1257
Merit: 1004
pool.sexy
Hi.
Here is a list of those wishing to connect. Join. https://forum.bits.media/index.php?/topic/21542-p2pool-opros/
- scopus - 30 Th/s
- vidikudik - 20 Th/s
- ramsis - 150 Th/s
- igorwhite - 300 Th/s
- antontmn - 54 Th/s
- m_a17 - 6 Th/s
- KlopS5 - 16 Th/s
- core -  0.4 Th/s
- dimazzzv - 1,5 Th/s
- Neotex - 6 Th/s
- omo74 -0,6 Th/s
- UserRu - 10 Th/s
- Andrey Shmidt - 140 Th/s
- ant5 - 300 Th/s
 
Ha 24.03.16 - 1034,5 Th/s  (Without rental power.).

Need to get some more Ph and go to the pool together at one point.
Wake up! Sun is up!

Greate oaks from lettle acorns grow! Cheek brings success.

I like you  Cheesy

C'mon guys, p2pool (and bitcoin classic  Wink ) needs your contribution
member
Activity: 88
Merit: 10
Hi.
Here is a list of those wishing to connect. Join. https://forum.bits.media/index.php?/topic/21542-p2pool-opros/
- scopus - 30 Th/s
- vidikudik - 20 Th/s
- ramsis - 150 Th/s
- igorwhite - 300 Th/s
- antontmn - 54 Th/s
- m_a17 - 6 Th/s
- KlopS5 - 16 Th/s
- core -  0.4 Th/s
- dimazzzv - 1,5 Th/s
- Neotex - 6 Th/s
- omo74 -0,6 Th/s
- UserRu - 10 Th/s
- Andrey Shmidt - 140 Th/s
- ant5 - 300 Th/s
 
Ha 24.03.16 - 1034,5 Th/s  (Without rental power.).

Need to get some more Ph and go to the pool together at one point.
Wake up! Sun is up!

Greate oaks from lettle acorns grow! Cheek brings success.
member
Activity: 88
Merit: 10
legendary
Activity: 1258
Merit: 1027
if i set up p2pool with -a my adress will it pay out to that one only?
like if my friend mine at my p2pool and uses his own btc adress will it go to him `?
BUMP

If the miner submits a valid bitcoin address as their user name anything that miner mines will be paid to the submitted address.

Setting -a means any miner that does not have a valid bitcoin address as a user name will mine to that address.

It's worth noting that any fees set up for the node operators benefit will also be paid to the -a address.
member
Activity: 88
Merit: 10
This picture illustrates the result of optimization of our nodes.

Optimizing p2pool.jpg

member
Activity: 88
Merit: 10
Hi

i'm having a problem using p2pool

Code:
root@security:~/p2pool# ................
2016-03-22 13:27:39.411692 >     raise Error_for_code(resp['error']['code'])(resp['error']['message'], resp['error'].get('data', None))
2016-03-22 13:27:39.411717 > p2pool.util.jsonrpc.NarrowError: -10 Bitcoin is downloading blocks...
^Croot@security:~/p2pool#

and it still say "Bitcoin is downloading blocks..." any one knows how it would take ?

You have to wate till the end of downloading. I have wating three days. See the debug.log. Find at bottom date of the block witch currently donloading.
member
Activity: 88
Merit: 10
Hello everyone.
By many experiments were obtained the optimal settings for personal nodes. After fine tuning the node parameter Bitcoind GetBlockTemplate Latency has dropped from 5-10 seconds to 0.1-0.2 seconds. The average DOA decreased from 5-7% to 1-4%. The amount of dead shares fell to zero. For normal operation, S5 and S7, you must use proxy from ckpool.
For use attaching the selected parameters.
bitcoin.conf
Code:
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
disablewallet=1
rpcport=8332
port=8333
rpcuser=
rpcpassword=
maxconnections=30
mintxfee=0.000001
minrelaytxfee=0.0003
rc.local
Code:
#!/bin/sh -e
ulimit -n 1000000
/sbin/ifconfig eth0 txqueuelen 10000
LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so /usr/local/bin/bitcoind -conf=/root/.bitcoin/bitcoin.conf -blocknotify=/usr/bin/notify.sh -shrinkdebugfile
screen -dmS RNC /usr/local/bin/relaynetworkclient 127.0.0.1 8333
sleep 60
LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so /etc/init.d/start-p2pool start
sleep 60
screen -dmS ckproxy3334 ckpool -p -k -n ckproxy3334 -c /home/root/ckolivas-ckpool/ckproxy3334.conf
screen -dmS ckproxy3335 ckpool -p -k -n ckproxy3335 -c /home/root/ckolivas-ckpool/ckproxy3335.conf
screen -dmS ckproxy3336 ckpool -p -k -n ckproxy3336 -c /home/root/ckolivas-ckpool/ckproxy3336.conf
screen -dmS ckproxy3337 ckpool -p -k -n ckproxy3337 -c /home/root/ckolivas-ckpool/ckproxy3337.conf
screen -dmS ckproxy3338 ckpool -p -k -n ckproxy3338 -c /home/root/ckolivas-ckpool/ckproxy3338.conf
screen -dmS ckproxy3339 ckpool -p -k -n ckproxy3339 -c /home/root/ckolivas-ckpool/ckproxy.3339.conf
screen -dmS ckproxy3340 ckpool -p -k -n ckproxy3340 -c /home/root/ckolivas-ckpool/ckproxy.3340.conf
exit 0
sysctl.conf
Code:
vm.swappiness = 10
vm.vfs_cache_pressure = 1000
kernel.sem = 250 256000 32 1024
 kernel.shmall = 2772801
 kernel.shmmax = 16825767253
 kernel.shmmni = 4096
 fs.file-max = 655360

net.core.rmem_max = 16777216
 net.core.wmem_max = 16777216
 net.ipv4.tcp_rmem = 4096 87380 16777216
 net.ipv4.tcp_wmem = 4096 65536 16777216
 net.ipv4.tcp_no_metrics_save = 1.
 net.ipv4.icmp_echo_ignore_broadcasts = 1.
ckproxy.conf for S7 (example)
Code:
{
"proxy" :  [
<------>{
<------><------>"url" : "10.162.33.200:9332",
<------><------>"auth" : "14DShfQviV9ehJL43yEvdje8cS5x3rSVKc",
<------><------>"pass" : "123"
<------>},
<------>{
<------><------>"url" : "crypto.office-on-the.net:9332",
<------><------>"auth" : "14DShfQviV9ehJL43yEvdje8cS5x3rSVKc",
<------><------>"pass" : "123"
<------>}
],
"update_interval" : 30,
"serverurl" : [
<------>"192.168.33.200:3334",
<------>"127.0.0.1:3334"
<------>],
"mindiff" : 1024,
"startdiff" : 1024,
"maxdiff" : 4992,
"clientsvspeed" : false,
"loglevel" : 1,
"logdir" : "logs"
}
Comments from here on are ignored.

ckproxy.conf for S5 (example)
Code:
{
"proxy" :  [
<------>{
<------><------>"url" : "stratum+tcp://10.162.33.200:9332",
<------><------>"auth" : "14DShfQviV9ehJL43yEvdje8cS5x3rSVKc",
<------><------>"pass" : "123"
<------>},
<------>{
<------><------>"url" : "stratum+tcp://crypto.office-on-the.net:9332",
<------><------>"auth" : "14DShfQviV9ehJL43yEvdje8cS5x3rSVKc",
<------><------>"pass" : "123"
<------>}
],
"update_interval" : 30,
"serverurl" : [
<------>"192.168.33.200:3338",
<------>"127.0.0.1:3338"
<------>],
"mindiff" : 256,
"startdiff" : 256,
"maxdiff" : 1042,
"clientsvspeed" : false,
"loglevel" : 1,
"logdir" : "logs"
}
Comments from here on are ignored.
Wellcome to our node: che2pool.mine.nu:9332. If you want we make you own port with personal wallet.
Bye.
Pages:
Jump to: