Topic: 16GH/s - BeagleBone ASIC cape (4 BFL ASICs) - Interest check (Read 3541 times)
Wow, thread digger.
The guy's more than capable at programming he's made quite a sweet looking Eruptor Beagle board miner, but PCB and chip assembly is an unknown, plus anything remotely connected to BFL is considered extremely risky...
Too bad can't get some Bitfury chips in that.
Well I guess I spoke way too soon... you can get BitFury chips and guess what... you can get some in August.
We will also explore that option. We're not married to any single chip vendor, instead we just want to bring the nicest turn-key miners to market.
I'd definently be interested in a bit fury cape.
Very very interested, if anyone is still following this thread. I'd have to take the "roof" off my BeagleBone but that's a sacrifice I'd be more than happy to make.
(Sorry, I bought my BBB from Adafruit, but I still think the MineNinja is awesome. I'm considering getting a MineNinja and tasking my current BBB with non-mining-related stuff.)
(Sorry, I bought my BBB from Adafruit, but I still think the MineNinja is awesome. I'm considering getting a MineNinja and tasking my current BBB with non-mining-related stuff.)
Very interested. But it's all about delivery day and cost per Gh/s. Show me the plans.
The guy's more than capable at programming he's made quite a sweet looking Eruptor Beagle board miner, but PCB and chip assembly is an unknown, plus anything remotely connected to BFL is considered extremely risky...
Too bad can't get some Bitfury chips in that.
Well I guess I spoke way too soon... you can get BitFury chips and guess what... you can get some in August.
We will also explore that option. We're not married to any single chip vendor, instead we just want to bring the nicest turn-key miners to market.
The guy's more than capable at programming he's made quite a sweet looking Eruptor Beagle board miner, but PCB and chip assembly is an unknown, plus anything remotely connected to BFL is considered extremely risky...
Too bad can't get some Bitfury chips in that.
Well I guess I spoke way too soon... you can get BitFury chips and guess what... you can get some in August.
Love napkin sketch 
On serious not would love to see Canary and Beagle team up and get this up and going. +1 for that idea
On serious not would love to see Canary and Beagle team up and get this up and going. +1 for that idea
Back of the napkin (literally!) design. We need to work out some more details, but I am very interested in working with CanaryInTheMine's group buy.
Heat transfer engineer here interested in designing the fan/radiator/water cooling portion of the system.
Keep us in mind.
Watching with great interest. Currently involved in CanaryInTheMine's BFL chip group buy
I too would be interested in a couple of complete turnkey systems in the $500 to $750 range (depending upon delivery date).
Back of the napkin (literally!) design. We need to work out some more details, but I am very interested in working with CanaryInTheMine's group buy.
developing an add-on board for the BeagleBone (known as a "cape" in Beagleease) that would contain 4 BFL ASICs. ... complete system would be somewhere between $500-$1000
Proceeding as follows,4 BFL chips = 16GH (+ to overclock, - to chip binning quality),
Midpoint of your complete system estimate = $750 (let's go ahead and put chip cost in there, being liberal),
cost per GH between $40 and $50.
Might be a little pricey by October? If Avalon ships, the Klondike boards are quite less than that, no?
Let us know when they're in stock.
As you may or may not know we're currently shipping BeagleBone Black based mining hosts, the MineNinja.
I'm considering developing an add-on board for the BeagleBone (known as a "cape" in Beagleease) that would contain 4 BFL ASICs. It would use the BeagleBone to control the ASICs via SPI, and would also run MineNinja, so it would be a turn-key, no host needed mining solution. Realistically we would be able to get these built and be ready to ship at the beginning of October. Pricing for the complete system would be somewhere between $500-$1000, depending on how many units are committed for the first run.
Any interest?
interested. i have 3500 chips ordered. where are you located? oh wait, you participated in my group buys, right? I'm considering developing an add-on board for the BeagleBone (known as a "cape" in Beagleease) that would contain 4 BFL ASICs. It would use the BeagleBone to control the ASICs via SPI, and would also run MineNinja, so it would be a turn-key, no host needed mining solution. Realistically we would be able to get these built and be ready to ship at the beginning of October. Pricing for the complete system would be somewhere between $500-$1000, depending on how many units are committed for the first run.
Any interest?
The guy's more than capable at programming he's made quite a sweet looking Eruptor Beagle board miner, but PCB and chip assembly is an unknown, plus anything remotely connected to BFL is considered extremely risky...
Too bad can't get some Bitfury chips in that.
There will be great general interest around the product when it is available for purchase.
The comparison will be 375 bucks for a 2 chip BFL that is running 8 Gh/s. If you can do a 4 chip solution running 16 Gh/s for 500 bucks you will sell more than you can make. At 1000 bucks you wont sell any. (BFL will catch up with orders one day...)
The comparison will be 375 bucks for a 2 chip BFL that is running 8 Gh/s. If you can do a 4 chip solution running 16 Gh/s for 500 bucks you will sell more than you can make. At 1000 bucks you wont sell any. (BFL will catch up with orders one day...)
I would love to see it. If you can get one working atm you could sell all day for 500 and quite a few at 1000. At 500 depending on timeline could be great. I wont blame you for BFL's faults. Personally would love thier chip to take off in devices.
Again all depends on when final product is done and can deliver.
Again all depends on when final product is done and can deliver.
The guy's more than capable at programming he's made quite a sweet looking Eruptor Beagle board miner, but PCB and chip assembly is an unknown, plus anything remotely connected to BFL is considered extremely risky...
And that's not what this community likes to spend money on - you guys prefer fancy renderings, vapor chips, and unrealistic delivery schedules.
Not this guy. Inform me of your milestones, release periodic updates, talk about anticipated risks, tell me about the issues when those risks materialize, succinctly articulate any schedule slips along with a brief explanation, and ultimately deliver the product. I don't need any fancy pictures, or unrealistic stakes on the ground, BFL-style drama, just some good old fashioned honest business talk and product. Reiterating I am interested in acquiring multiple 16 GHs units at your 1K price. I saw 900 somewhere on the thread. That's obviously good too. Make it happen. Best of luck. I will be waiting.
This. I have cash looking for a product that isn't just vapor - lots of cash. But no more pre-orders for me, period. Show me the Gh/s.
See Burnin's thread for what I would consider good communication through the development process...
When you have something that is 100% functional and available to ship, I would consider it.
I would keep the price as low as possible. A lot of people will want to kick the tires before committing to any purchases.
I would keep the price as low as possible. A lot of people will want to kick the tires before committing to any purchases.
this
Jump to: