By the way, I just built your cables. Hopefully they do the trick, and should be in the mail tomorrow.
yeah I am going to use them and try to see what happens to the 2980 I am running.
I am also going to test one of these 2000w boards as someone was kind enough to send me one.
Interesting. I have a stock of 1k cable coming in from some partners in China. Was going to test the waters on the website/Amazon. I am doing 2 footers with 6 pinners on each end.
By the way, who sent you a board!? Silent knight I suppose.
-Optim
well I am stuck with the 2880/2980 gear
so they have 20 jacks so if I run 2 avalon 6's the y cable allows 16 jacks to go to 8 jacks. pulling 2200 watts ac.
so 2200/16 = 137.50 watts at each 2880/2980 breakout board jack used.
now it is 2200/8 = 275 watts at each 2880/2980 breakout board jack used.
got to be safer ½ the load on each jack.
if I did not have all the 2980 psu's and the boards switching would be easier. (about 700 usd)
but after testing the 2980's they are true platinum.
and the 2000 watt hps are not plat most likely they are silver.
I am passing on the donator question. But it will be nice to test your gear.
The offer stands if you want to play with the 2880 psu (same pinout as the 2980)