Ok is any one using server psu's?
had one running on a DPS-600 but did not had my kill-a-watt then so no numbersit's said these have far over 90% efficiency
Topic: 4 Antminer S1's on 1 PSU ? - page 3. (Read 8218 times)
it's said these have far over 90% efficiency
Ok is any one using server psu's?
IE dell hp?
IE dell hp?
Fortron Raider S 750W (80+ Silver) - two S1 non overclocked 735W at the wall (230V)
and if one unit only then 359W at the wall
and if one unit only then 359W at the wall
You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
I'm running 2 ants per AX860 PSU and 3 ants per EVGA G2 1300W PSU
i think you should use Corsair ax860(comes with 7 years warranty) platinum it has a 93% eff. on 230v i used to have 2 antminers @ 180ghash stock clock and 25 usb sticks with no problem. best psu you can get otherwise you should go for the Evga Supernova 1300 Gold(10 years warranty) where u can run 3 ants on.
Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.
The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.
My bad then. Sorry for the false info. At least I learnt something new today
Agreed, all of my Ants use less than 400W at the wall running at 200GH/s using a good quality, Gold PSU.
Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.
The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.
My bad then. Sorry for the false info. At least I learnt something new today
Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.
The 500w measurement is completely false, was done w/ a shitty PSU. At the wall w/ a 80+ GOLD @ 120v, I see about 1w / mhz, so 400mhz is about 400w! Take 10% off that and these use roughly 360w @ 400mhz, on the PSU itself.
Apparently a 530W psu can run a standard (not over clocked) S1. So you'll need 2.12kW to run 4 (530*4). These are all my assumptions, but sushi told me that 530W should be able to run a 180gh/s S1.
LEPA has a 1600W PSU but no one tried that yet
however there are some stable >2kW server psu's
however there are some stable >2kW server psu's
You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
I'm running 2 ants per AX860 PSU and 3 ants per EVGA G2 1300W PSU
You should be able to safely run 2 Ants on a 1000W PSU, or 3 ants on a 1300W PSU.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
I would not try to run 4 Ants on a single PSU. It's difficult and expensive to find a single PSU that can run over 1600W.
Each Ant requires 2 dedicated PCI-E cables to safely run.
As the title says
What the best PSU to run 4 Antminer's that are clocked at 375
Or
do i run 2 PSU's with 2 on Each !!!!!!
What the best PSU to run 4 Antminer's that are clocked at 375
Or
do i run 2 PSU's with 2 on Each !!!!!!
Jump to: