[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 38.

wavelengthsf

full member

Activity: 658

Merit: 118

Quote from: ?? on ??

I just hooked up a s9 Antminer and cannot get worker state to turn on my account eventhough the miner has been mining for a couple hours. I do have the URL correct and the worker correct in the miner. Please assist it may sound like a crazy question but I cannot figure it out. Thanks in advance.

Post your Antminer status page screen shot so we can help

Sp3cul8r

newbie

Activity: 41

Merit: 0

Quote from: ?? on ??

I just hooked up a s9 Antminer and cannot get worker state to turn on my account eventhough the miner has been mining for a couple hours. I do have the URL correct and the worker correct in the miner. Please assist it may sound like a crazy question but I cannot figure it out. Thanks in advance.

Did you hit "Save and Apply" in Cgminer? Also, just because the miner is making noise doesn't mean that it is mining. You are labeled as a newbie, so I'm not sure if you understand this concept. I use Avalon miners and the light on the back of the miner has to be green, not yellow, to denote active mining. I'm not sure how it works on S9s, but it is probably similar.

allinvain

legendary

Activity: 3080

Merit: 1080

lol it does sound like a crazy question Cheesy

As long as you got the right Stratum address and the worker name is correct AND created on the pool side it should all work without any problems.

wavelengthsf

full member

Activity: 658

Merit: 118

Quote from: Thetaj on October 14, 2017, 09:05:13 AM

Yo guys, what the shit happened to the blocks today? are we getting raped by luck?

The 150% luck of the day before got us all drunk, and now we're hung over with reality.

Thetaj

full member

Activity: 402

Merit: 116

Yo guys, what the shit happened to the blocks today? are we getting raped by luck?

allinvain

legendary

Activity: 3080

Merit: 1080

Quote from: tahoejoe on October 13, 2017, 11:50:25 AM

I hope its ok to post this type of question here. I do not see any customer service link on the pool site.
I have a payout transaction that is unconfirmed since yesterday, now 24 hours old. Still pending in my wallet.

https://blockchain.info/tx/a99de750f54cf778c0ce5f84ad11fefc0a6f67a972f9025e7089d21f2fa2f87f

Wait it out or how to escalate the issue with slush?

Wait it out a bit more. As long as you have a correct payout address it should eventually confirm. They pay almost no fees to the network when sending out payouts so the transactions are prioritized lower by miners (ironic isn't it..lol)

tahoejoe

newbie

Activity: 2

Merit: 0

I hope its ok to post this type of question here. I do not see any customer service link on the pool site.
I have a payout transaction that is unconfirmed since yesterday, now 24 hours old. Still pending in my wallet.

https://blockchain.info/tx/a99de750f54cf778c0ce5f84ad11fefc0a6f67a972f9025e7089d21f2fa2f87f

Wait it out or how to escalate the issue with slush?

wavelengthsf

full member

Activity: 658

Merit: 118

Quote from: bussumseheide on October 10, 2017, 10:26:41 AM

Todays 65% is extreme low, has slush pool performed this bad in the past ever?

Yes. There are also days when it's luck is higher than 130%. It's all variance.

bussumseheide

newbie

Activity: 47

Merit: 0

Todays 65% is extreme low, has slush pool performed this bad in the past ever?

allinvain

legendary

Activity: 3080

Merit: 1080

Quote from: Biffa on October 09, 2017, 05:16:33 PM

Because luck

Today is his lucky day, cause he gets to learn about mining luck.

@agismaniax - welcome to the great bitcoin lottery!

Biffa

legendary

Activity: 3234

Merit: 1220

Because luck

agismaniax

newbie

Activity: 49

Merit: 0

in the last 3 days, pool luck is dropping a lot. why? Huh

Logan4el

full member

Activity: 158

Merit: 103

Check voltage on the psu and socket during drops.

chupalt

newbie

Activity: 1

Merit: 0

We just stood up 4 Avalon 741s on slushpool. Mining around 30 TH/s, but we're seeing a lot of variation in our hashrate (especially during the day). It will be great for awhile and then start to go all over the place. We have 2 workers setup each with 2 Avalon 741s. Everything seems to be ok on our end. Temperatures are in the good range, internet seems to be stable. I've tried tweaking the minimum difficulty up from the default 128, but that just seemed to make things worse.

Anyone have any ideas where we should focus our troubleshooting?

https://imgur.com/a/3JEIB

robe.games.ios

newbie

Activity: 35

Merit: 0

hi, I developed a crypto mining monitor iOS app and would like to add support for Slushpool. I'm not a bitcoin miner and so I'm looking for volunteers to help test its functionality. Basically you can monitor your miner stats with the app. Data will come slushpool API. All readonly properties. Let me know thanks. Here is my app.
Ethereum Mining Monitor
https://itunes.apple.com/us/app/ethereum-mining-monitor/id1139650210?mt=8

prodia

newbie

Activity: 1

Merit: 0

Quote from: VTL1 on August 20, 2017, 10:15:14 AM

Hi guys

Does someone know why Slushpool is still getting namecoins but not giving out rewards for it?

I have seen the same issue, been happening for a month(8/1/2017) on my dashboard, just sent a 2nd message to slushpool feedback as the first one was not answered

We know they are supposed to be converted, but the display has stopped functioning and every block ID is in a "processing" state.

I hope slushpool announces something about it, officially.

allinvain

legendary

Activity: 3080

Merit: 1080

Quote from: RealHummer on September 02, 2017, 06:04:19 PM

Quote from: allinvain on September 02, 2017, 01:07:06 PM

Quote from: RealHummer on September 02, 2017, 09:17:44 AM

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

I jerked around for hours today, power cycled checked the spelling you name it. I finally rebooted my router I have them plugged into and that took care of it. Weird how it worked for Kano but not slushpool.

Thanks for the input

Hmm, yeah that is bizzare. Do you have custom DNS server set in your router? Or some kind of DNS cache system? Maybe also your router's routing table took a dump. Who knows. Glad you got it solved.

RealHummer

full member

Activity: 238

Merit: 113

Quote from: allinvain on September 02, 2017, 01:07:06 PM

Quote from: RealHummer on September 02, 2017, 09:17:44 AM

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

I jerked around for hours today, power cycled checked the spelling you name it. I finally rebooted my router I have them plugged into and that took care of it. Weird how it worked for Kano but not slushpool.

Thanks for the input

allinvain

legendary

Activity: 3080

Merit: 1080

Quote from: RealHummer on September 02, 2017, 09:17:44 AM

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

RealHummer

full member

Activity: 238

Merit: 113

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 38. (Read 4382648 times)