[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 832.

Lucko

hero member

Activity: 826

Merit: 1000

Quote from: organofcorti on April 20, 2013, 07:09:31 PM

Quote from: Lucko on April 20, 2013, 05:36:30 AM

Would it be possible to get a maintenance mode? Yesterday I had to wait for more then 4 hours for block to end so I could shout down miners for some maintenance. I'm not asking for much but to be able to use this option 1 per mount and rewords would be calculated not with slash method but with some other more linear one for block when it was started... Or maybe with slash but it would use the time of the start of maintenance mode as a end of a block... If this is too difficult I understand and I have a work around. When I plan to do that and I don't forget I switch to BTC Guild and PPS at earlier time so I can turn down miners whenever I like. But I would like to see a way to do it without waiting for the end of a block.

Perhaps a better way to ask would be "Slush can we have PPS here to and I don't mind paying a little extra. Please?"

However on average it doesn't matter when you shut your miners down for maintenance if it's often enough. Over time, your earnings will be than better than on a PPS pool with a greater fee.

Good idea. Switch to PPS at the end of the block option...

And if you look from statistical point solo would be the best way to go. Did any of that in near past?

nottm28

hero member

Activity: 574

Merit: 500

Quote from: organofcorti on April 20, 2013, 07:09:31 PM

Quote from: Lucko on April 20, 2013, 05:36:30 AM

Would it be possible to get a maintenance mode? Yesterday I had to wait for more then 4 hours for block to end so I could shout down miners for some maintenance. I'm not asking for much but to be able to use this option 1 per mount and rewords would be calculated not with slash method but with some other more linear one for block when it was started... Or maybe with slash but it would use the time of the start of maintenance mode as a end of a block... If this is too difficult I understand and I have a work around. When I plan to do that and I don't forget I switch to BTC Guild and PPS at earlier time so I can turn down miners whenever I like. But I would like to see a way to do it without waiting for the end of a block.

Perhaps a better way to ask would be "Slush can we have PPS here to and I don't mind paying a little extra. Please?"

However on average it doesn't matter when you shut your miners down for maintenance if it's often enough. Over time, your earnings will be than better than on a PPS pool with a greater fee.

Slush, while you at it can you write some code to improve the pool luck...

Hippie Tech

legendary

Activity: 1624

Merit: 1001

All cryptos are FIAT digital currency. Do not use.

Quote from: Lucko on April 20, 2013, 03:39:43 PM

Quote from: Hippie Tech on April 20, 2013, 09:27:20 AM

Wtf is up with the nooob storm ! ? Grin

ROI stats ? Maintenance mode ? LMfreakinAO

I guess you shoulda quit after that last 2 minute round. eheh

Can I get you as a adviser then to tell me when a 2 minute round comes in...

Now it was just a suggestion how to make a pool better for users... You don't need to be rude about it... And we have a say in Slovenia. There are no dumb question just dumb answers.

I wasn't trying to be an ass.. just having a little fun because I've been there/ done that myself. lol eg.. asked a noobish question..

Let he/she who is without noob, cast the first troll. Cool

In other words, don't take anything personally. I know I'm not.

pEACe

qbits

full member

Activity: 219

Merit: 100

Quote from: Lucko on April 20, 2013, 03:39:43 PM

Quote from: Hippie Tech on April 20, 2013, 09:27:20 AM

Wtf is up with the nooob storm ! ? Grin

ROI stats ? Maintenance mode ? LMfreakinAO

I guess you shoulda quit after that last 2 minute round. eheh

Can I get you as a adviser then to tell me when a 2 minute round comes in...

Now it was just a suggestion how to make a pool better for users... You don't need to be rude about it... And we have a say in Slovenia. There are no dumb question just dumb answers.

there is another one which is even more appropriate: knowledge is silent, ignorance is loud (znanje molči, neznanje kriči).

organofcorti

donator

Activity: 2058

Merit: 1007

Poor impulse control.

Quote from: Lucko on April 20, 2013, 05:36:30 AM

Would it be possible to get a maintenance mode? Yesterday I had to wait for more then 4 hours for block to end so I could shout down miners for some maintenance. I'm not asking for much but to be able to use this option 1 per mount and rewords would be calculated not with slash method but with some other more linear one for block when it was started... Or maybe with slash but it would use the time of the start of maintenance mode as a end of a block... If this is too difficult I understand and I have a work around. When I plan to do that and I don't forget I switch to BTC Guild and PPS at earlier time so I can turn down miners whenever I like. But I would like to see a way to do it without waiting for the end of a block.

Perhaps a better way to ask would be "Slush can we have PPS here to and I don't mind paying a little extra. Please?"

However on average it doesn't matter when you shut your miners down for maintenance if it's often enough. Over time, your earnings will be than better than on a PPS pool with a greater fee.

Lucko

hero member

Activity: 826

Merit: 1000

Quote from: Hippie Tech on April 20, 2013, 09:27:20 AM

Wtf is up with the nooob storm ! ? Grin

ROI stats ? Maintenance mode ? LMfreakinAO

I guess you shoulda quit after that last 2 minute round. eheh

Can I get you as a adviser then to tell me when a 2 minute round comes in...

Now it was just a suggestion how to make a pool better for users... You don't need to be rude about it... And we have a say in Slovenia. There are no dumb question just dumb answers.

Lanidarc

newbie

Activity: 48

Merit: 0

Quote from: ?? on ??

Quote from: slush on April 19, 2013, 08:12:24 AM

Quote from: ?? on ??

Hey, can you make stratum proxy compatible with python 2.4.3?

Python 2.4.3 is quite obsolete now and I have no plans for adding support for 2.4 branch. However I'll accept patches adding compatibility with older versions.

Is there an easy way to upgrade python without screwing everything up?

Jeez, wtf is up with these old geezers posting air-headed, off-topic, ill-posed problems to the thread?

Hippie Tech

legendary

Activity: 1624

Merit: 1001

All cryptos are FIAT digital currency. Do not use.

Wtf is up with the nooob storm ! ? Grin

ROI stats ? Maintenance mode ? LMfreakinAO

I guess you shoulda quit after that last 2 minute round. eheh

Lucko

hero member

Activity: 826

Merit: 1000

Would it be possible to get a maintenance mode? Yesterday I had to wait for more then 4 hours for block to end so I could shout down miners for some maintenance. I'm not asking for much but to be able to use this option 1 per mount and rewords would be calculated not with slash method but with some other more linear one for block when it was started... Or maybe with slash but it would use the time of the start of maintenance mode as a end of a block... If this is too difficult I understand and I have a work around. When I plan to do that and I don't forget I switch to BTC Guild and PPS at earlier time so I can turn down miners whenever I like. But I would like to see a way to do it without waiting for the end of a block.

Lanidarc

newbie

Activity: 48

Merit: 0

Quote from: irritant on April 19, 2013, 07:33:24 PM

would it be possible to add the feature to make different workers payout to different addresses? might be useful so I can keep track of the ROI of different workers (I understand if it just complicates things and gives more chance for errors, but from a users point of view it would be nice) not really necessary, I could also just write things down or something I guess

Why don't you simply make multiple accounts?

Also, while I can see this being interesting for a few people, the ROI on any setup simply comes down to Mh/s and one can simply use one of the online calculators to see the merits of any given machine/device. Since the difficulty and pool Gh/s change with time, the ROI you might gather is pretty much meaningless other than sum total BTC by some particular setup. Why waste Slush's time asking for crap like this? Huh

irritant

sr. member

Activity: 473

Merit: 250

Sodium hypochlorite, acetone, ethanol

would it be possible to add the feature to make different workers payout to different addresses? might be useful so I can keep track of the ROI of different workers (I understand if it just complicates things and gives more chance for errors, but from a users point of view it would be nice) not really necessary, I could also just write things down or something I guess

Oktoberfest

newbie

Activity: 15

Merit: 0

Alright, great you've got it back up! Good work slush!
Question though...

Is it alright to use any three of these still?

stratum.bitcoin.cz
stratum2.bitcoin.cz
stratum3.bitcoin.cz

I'm still on 3 since that's what worked yesterday when the others didn't. Just need to make sure. Thanks in advance.

ntgrac

newbie

Activity: 14

Merit: 0

Approx. cluster performance (30 min average): 9048.284 Ghash/s

Very good work slush.

anti

newbie

Activity: 22

Merit: 0

Thanks Slush for getting the pool back up! Wink

Given all the DDoS and the surge in new users, have you ever changed C in the score-based reward algorithms or has it remained to be 300?

Lanidarc

newbie

Activity: 48

Merit: 0

Quote from: roukkie on April 19, 2013, 08:51:55 AM

im using gui miner and i want to mine with cudaminer but i cant any suggestion why??(my gpu is gt 440).for now i mining with opencl just fine...

There's not much reason to make that move with that card. You won't get any performance boost.

You should read this thread:

https://bitcointalksearch.org/topic/nvidia-kepler-k20-from-134mhashs-to-330mhashs-with-cuda-163750

roukkie

newbie

Activity: 29

Merit: 0

im using gui miner and i want to mine with cudaminer but i cant any suggestion why??(my gpu is gt 440).for now i mining with opencl just fine...

slush

legendary

Activity: 1386

Merit: 1097

Quote from: joolzg on April 19, 2013, 06:55:58 AM

also Slush whats the reason for 100 confirmations before earnings become confirmed?

100 confirmations for block maturity is one of basic bitcoin rules. I cannot move coins which are "locked" in unmatured blocks.

slush

legendary

Activity: 1386

Merit: 1097

Quote from: ?? on ??

Hey, can you make stratum proxy compatible with python 2.4.3?

Python 2.4.3 is quite obsolete now and I have no plans for adding support for 2.4 branch. However I'll accept patches adding compatibility with older versions.

slush

legendary

Activity: 1386

Merit: 1097

Quote from: Otaci on April 19, 2013, 06:41:11 AM

During the recent DDOS I switched to BTCGuild for a while. I'm back here now. One feature that they have which is pretty nice is the "Inactive Miner Notification". It sends an e-mail when a miner becomes inactive for over x minutes. Any chance of having a similar feature in this pool?

Yes, soon.

joolzg

member

Activity: 76

Merit: 10

also Slush whats the reason for 100 confirmations before earnings become confirmed?

joolz

Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 832. (Read 4382671 times)