Hey folks, I wrote a slush stratum proxy setup memior that covers the part where one setts up Block Erupter blades for the slush proxy interaction.... that was giving me fits. If you too are having stratum proxy setup headaches take a read at https://bitcointalksearch.org/topic/m.3057220. Have a nice day.
H@shKraker
Topic: .5 BTC BOUNTY if you can get my Block Erupter blade hashing right w/stratum. (Read 6828 times)
September 01, 2013, 11:16:20 AM
June 01, 2013, 01:01:54 AM
Nave, how did you resolve the problem?
It's all here: https://bitcointalksearch.org/topic/solved-2btc-reward-to-get-asicminer-blades-12-ghs-on-stratum-213956
But essentially there was an android phone that was spamming the network and causing problems. Removing the phone from the network solved everything.
May 31, 2013, 08:41:36 PM
Nave, how did you resolve the problem?
May 26, 2013, 06:51:26 PM
I find it utterly insane that people are willing to buy a blade but insist on using wifi for the connection. ffs run some cat-5e and be done with wifi related issues.
This is a line of business thing, once you start investing money into mining you should stop thinking of it as a hobby and start using appropriate technology to support your needs.
This is a line of business thing, once you start investing money into mining you should stop thinking of it as a hobby and start using appropriate technology to support your needs.
I find it utterly insane that people will openly criticise others without practicing basic reading comprehension. As both of us that had this problem have stated, the blades ARE wired directly, not connected via wireless, yet having the wireless radio on caused an issue with the blades. It has since been resolved for myself and pikeadz, but thank you for bumping this thread with your genuine concern and very helpful suggestion.
May 26, 2013, 04:36:17 PM
I find it utterly insane that people are willing to buy a blade but insist on using wifi for the connection. ffs run some cat-5e and be done with wifi related issues.
This is a line of business thing, once you start investing money into mining you should stop thinking of it as a hobby and start using appropriate technology to support your needs.
This is a line of business thing, once you start investing money into mining you should stop thinking of it as a hobby and start using appropriate technology to support your needs.
May 22, 2013, 09:53:04 PM
I moved the blade downstairs but am still having the wifi issue. Turn the wifi off, hash rate goes up to 13,000. Turn it back on, and it starts alternating between my two pools every 20 seconds or so at about a constant 10,000 mh/s rate (which is better than before, but still not optimal). I am stumped.
I've been having problems with my two blades for days. I just disabled the wireless on my router and everything started working perfectly, so I think we have the same problem. With the wireless enabled I can't even get the blades to return more than 2 or 3 shares to the stratum proxy. They'll hash via getwork protocol at around 5-6GH/s though. With wireless off they work great via stratum proxy or getwork. Leaving wireless disabled for any length of time isn't really an option for me though.
I'm using a Verizon MI424WR-GEN2 router, any chance that's what you're using?
I have a Verizon westell 7500 DSL modem/wireless router combo. I finally solved the problem and it's been hashing away for over 24 hours now at over 12800. Currently 13,000mh/s. What I finally figured out was that the wireless signal from my modem/router was problematic. To get around it, I had an old linksys wrt150n lying around with dd-wrt v24 firmware. I disabled the wifi on the westell and (with the help of verizon tech support) configured it to be a modem only, leaving my linksys router to be the wireless signal. Worked like a charm, but I can't explain why. Good luck to you sir.
EDIT: .2 BTC paid to dogie in good faith for his efforts in helping me understand stratum. The rest I am going to keep because I spent about 48 hours solving this on my own. Sorry to offend you guys in the beginning of this thread. Otherwise, I hope it helps someone else who has the same problem.
I picked up a wireless router to add to my network. I disabled the wireless on my verizon modem/router and I'm still having the issue with low hash rates on my blades. Anyone able to offer any further suggestions? It would be greatly appreciated, thanks.
May 21, 2013, 11:14:42 AM
I moved the blade downstairs but am still having the wifi issue. Turn the wifi off, hash rate goes up to 13,000. Turn it back on, and it starts alternating between my two pools every 20 seconds or so at about a constant 10,000 mh/s rate (which is better than before, but still not optimal). I am stumped.
I've been having problems with my two blades for days. I just disabled the wireless on my router and everything started working perfectly, so I think we have the same problem. With the wireless enabled I can't even get the blades to return more than 2 or 3 shares to the stratum proxy. They'll hash via getwork protocol at around 5-6GH/s though. With wireless off they work great via stratum proxy or getwork. Leaving wireless disabled for any length of time isn't really an option for me though.
I'm using a Verizon MI424WR-GEN2 router, any chance that's what you're using?
I have a Verizon westell 7500 DSL modem/wireless router combo. I finally solved the problem and it's been hashing away for over 24 hours now at over 12800. Currently 13,000mh/s. What I finally figured out was that the wireless signal from my modem/router was problematic. To get around it, I had an old linksys wrt150n lying around with dd-wrt v24 firmware. I disabled the wifi on the westell and (with the help of verizon tech support) configured it to be a modem only, leaving my linksys router to be the wireless signal. Worked like a charm, but I can't explain why. Good luck to you sir.
EDIT: .2 BTC paid to dogie in good faith for his efforts in helping me understand stratum. The rest I am going to keep because I spent about 48 hours solving this on my own. Sorry to offend you guys in the beginning of this thread. Otherwise, I hope it helps someone else who has the same problem.
May 20, 2013, 02:40:00 AM
I moved the blade downstairs but am still having the wifi issue. Turn the wifi off, hash rate goes up to 13,000. Turn it back on, and it starts alternating between my two pools every 20 seconds or so at about a constant 10,000 mh/s rate (which is better than before, but still not optimal). I am stumped.
I've been having problems with my two blades for days. I just disabled the wireless on my router and everything started working perfectly, so I think we have the same problem. With the wireless enabled I can't even get the blades to return more than 2 or 3 shares to the stratum proxy. They'll hash via getwork protocol at around 5-6GH/s though. With wireless off they work great via stratum proxy or getwork. Leaving wireless disabled for any length of time isn't really an option for me though.
I'm using a Verizon MI424WR-GEN2 router, any chance that's what you're using?
May 19, 2013, 12:26:47 AM
Try setting up the port forwarding on your router to forward port 3333 (stratum) or whatever you're using?
May 19, 2013, 12:00:48 AM
I moved the blade downstairs but am still having the wifi issue. Turn the wifi off, hash rate goes up to 13,000. Turn it back on, and it starts alternating between my two pools every 20 seconds or so at about a constant 10,000 mh/s rate (which is better than before, but still not optimal). I am stumped.
My 2 Cents would be that there is some sort of QoS in your router for your WIFI and or something on your wifi chewing up your bandwidth. Seeing the blades via Stratum are fairly "powerful" there is a large amount of small transfers that happen. Advice would be to have blade plugged directly into router along with PC running the proxy software and try re enabling your wireless and changing the key so no devices can connect and see if it still does the same thing.
May 18, 2013, 09:53:45 PM
I moved the blade downstairs but am still having the wifi issue. Turn the wifi off, hash rate goes up to 13,000. Turn it back on, and it starts alternating between my two pools every 20 seconds or so at about a constant 10,000 mh/s rate (which is better than before, but still not optimal). I am stumped.
May 18, 2013, 09:01:39 AM
What's your variable difficulty set to? Try using a difficulty of 64 or something higher.
The pools all seem to suggest 8 or 16 for the blade's hash rate. I should go higher?
May 17, 2013, 11:38:41 PM
add -rt at the end of proxy initialization command
mining_proxy.py -o stratum.btcguild.com -p 3333 -rt
mining_proxy.py -o stratum.btcguild.com -p 3333 -rt
May 17, 2013, 11:26:18 PM
What's your variable difficulty set to? Try using a difficulty of 64 or something higher.
May 17, 2013, 10:50:07 PM
Been working on this all day. In the off chance anyone cares, I finally got it hashing stably for an hour. It has been slowly creeping up and is at 93% efficiency right now, or 11174 mh/s. The way I did it this time was to DISABLE my wireless internet in my whole house. This really sucks, but I am willing to do it for the time being. I tried changing channels to 1 and 11 but everytime I turn it on, the hash rate goes steadily down. The router is right underneath the blade, and has to be since I have really short ethernet cables. I will separate them tomorrow and hopefully be able to restore my wireless.
Anyone have any other ideas or similar experiences?
Anyone have any other ideas or similar experiences?
May 17, 2013, 07:16:58 PM
I made a point of disabling all my antivirus and router firewall just to eliminate all variables that might be blocking stratum (temporarily). All of a sudden, 18 hours later, windows firewall pops up in my task bar and asks me if i would like to allow stratum........ (facepalm)
I disabled windows firewall and now it's hashing at 12,300 mh/s. There have been a few periods of time when it would do this for a few minutes before. This is the longest I've seen it hash this fast though. I am praying that I solved this problem. I still feel dumb that I didn't think to disable windows firewall though. Hopefully this helps other people new to this though.
EDIT: well, so much for that idea. It hashed like crazy for 45 minutes and then went back down to 0. :/
I disabled windows firewall and now it's hashing at 12,300 mh/s. There have been a few periods of time when it would do this for a few minutes before. This is the longest I've seen it hash this fast though. I am praying that I solved this problem. I still feel dumb that I didn't think to disable windows firewall though. Hopefully this helps other people new to this though.
EDIT: well, so much for that idea. It hashed like crazy for 45 minutes and then went back down to 0. :/
May 17, 2013, 04:02:32 PM
Okay, didn't mean to insult you guys, geez lol... just trying to get some quick help. anyway, dogie helped me get stratum up but the hash rate stays around 6000. Wondering if it is defective. All the chips read 0 but efficiency won't stay above 60% for long. This is one of the problems friedcat mentioned in the troubleshooting post.
May 17, 2013, 12:37:07 PM
It is really a piece of cake:
Just run the stratum executable on your favorite OS followed by "-o STRATUM_SERVER -p PORT_STRATUM_SERVER" (from experience use a direct stratum server of the desired mining pool, it works the best).
So for BTC Guild the raw command will be (windows): mining_proxy_1.2.0.exe -o stratum.btcguild.com -p 3333
And for 50BTC the raw command will be (windows): mining_proxy_1.2.0.exe -o pool.50btc.com -p 3333
Happy stratum mining @ 13Ghps (which is ideal, because of the efficiency of pool and your network connection)!
Just run the stratum executable on your favorite OS followed by "-o STRATUM_SERVER -p PORT_STRATUM_SERVER" (from experience use a direct stratum server of the desired mining pool, it works the best).
So for BTC Guild the raw command will be (windows): mining_proxy_1.2.0.exe -o stratum.btcguild.com -p 3333
And for 50BTC the raw command will be (windows): mining_proxy_1.2.0.exe -o pool.50btc.com -p 3333
Happy stratum mining @ 13Ghps (which is ideal, because of the efficiency of pool and your network connection)!
May 17, 2013, 11:40:22 AM
such kind of offer would rather turn people away from helping you
May 17, 2013, 08:51:23 AM
Dont be a pussy, i'll do it for free. Its not that difficult.
Jump to: