For instance if it doesn't go down with the current mobo, i will build another fresh rig off a new mobo i suppose, but for now lets go with the flow
So currently i can run 2 cards and the mobo with the 600w psu and once the other cards arrive with the evga psu, i switch this psu to only run the cards
I bought sata risers as i heard molex connectors burn after a while
Thank you for the support, i understand its a risk that i am taking, i hope all goes well but i need to know if one of the supply goes down how will it burn the whole thing assuming i have 2 psu's for 2 different roles? one is powering the mobo and 3 psu and one is powering only the risers & cards,
Topic: 5 Pcie mobo, add 6 gpu Mining (Gigabyte GA-EX58-UD5) - page 2. (Read 1761 times)
That motherboard actually looks like it has 5 usable PCIe slots. (3 physical x16 slots, 1 physical x1, and 1 physical x4).
Yes you are right
If the 2 1060s will be your only cards in that rig, you should be able to use 2 of the physical x16 slots without risers. (Making some kind of custom enclosure would be nice, though.)
I am planning to order 4 more cards, hence the question
The card you linked isn't necessary (and alone, it wouldn't be sufficient either) for your current purposes. You have enough PCIe slots for now. Instead, you may be looking for risers such as this one: https://www.newegg.com/Product/Product.aspx?Item=N82E16812119888
I will order 6 of these risers & 1x 3 riser to make all 6 work, i hope you get what iam saying.
These allow you to connect a PCIe x16 graphics card to a PCIe x1 slot on the motherboard. If you expand your rig, you will definitely want these. Having just one for your current plan of 2x 1060s would probably make cooling easier, but isn't absolutely necessary.
Already ordered 2 usb risers currently
Please list your other components, in addition to the two 1060s and this motherboard. Do you have any other graphics cards? What kind of CPU do you have?
I dont have any other graphic cards, these are the only two and i plan on ordering 4 more cards to complete the rig, CPU is Intel Xeon E5540 processor 2.53GHz /LGA1366/8MB/Quad-Core/FSB 1366MHz Server cpu
I am planning to run the rig via linux. simple mining OS
So far, I'm thinking a high-quality 600W PSU should have no problem running this rig with 2x 1060s (assuming you have the necessary connectors/adapters), but I'd like to find out more about the rest of your components to get a better picture.
What kind of PSU is it, exactly?
DeepCool PSU 600 Bronze Rated, that was the best option, i had avail here, need to know which psu should i buy next? and how many watts for six 1060 6gb to mine ether
not sure with the necessary connectors, what else would i be required rather than the standard that comes with psu itself
I understand the point of the PSU but this comes with a 1 year warranty, and i had already purchased it for gaming, i read the reviews arent too shabby for the unit but i cant just let the brand new psu go, so for now iam trying to go with what i have and add another good psu like seasonic/evga for the rest of the cards?
Yes you are right
If the 2 1060s will be your only cards in that rig, you should be able to use 2 of the physical x16 slots without risers. (Making some kind of custom enclosure would be nice, though.)
I am planning to order 4 more cards, hence the question
The card you linked isn't necessary (and alone, it wouldn't be sufficient either) for your current purposes. You have enough PCIe slots for now. Instead, you may be looking for risers such as this one: https://www.newegg.com/Product/Product.aspx?Item=N82E16812119888
I will order 6 of these risers & 1x 3 riser to make all 6 work, i hope you get what iam saying.
These allow you to connect a PCIe x16 graphics card to a PCIe x1 slot on the motherboard. If you expand your rig, you will definitely want these. Having just one for your current plan of 2x 1060s would probably make cooling easier, but isn't absolutely necessary.
Already ordered 2 usb risers currently
Please list your other components, in addition to the two 1060s and this motherboard. Do you have any other graphics cards? What kind of CPU do you have?
I dont have any other graphic cards, these are the only two and i plan on ordering 4 more cards to complete the rig, CPU is Intel Xeon E5540 processor 2.53GHz /LGA1366/8MB/Quad-Core/FSB 1366MHz Server cpu
I am planning to run the rig via linux. simple mining OS
So far, I'm thinking a high-quality 600W PSU should have no problem running this rig with 2x 1060s (assuming you have the necessary connectors/adapters), but I'd like to find out more about the rest of your components to get a better picture.
What kind of PSU is it, exactly?
DeepCool PSU 600 Bronze Rated, that was the best option, i had avail here, need to know which psu should i buy next? and how many watts for six 1060 6gb to mine ether
not sure with the necessary connectors, what else would i be required rather than the standard that comes with psu itself
I understand the point of the PSU but this comes with a 1 year warranty, and i had already purchased it for gaming, i read the reviews arent too shabby for the unit but i cant just let the brand new psu go, so for now iam trying to go with what i have and add another good psu like seasonic/evga for the rest of the cards?
There is no guarantee that the 1 to 3 x1 "splitter" will work with your motherboard. Just make sure that you have a plan should that be a case. Many people have had success with them, but many have not.
Suppose that your CPU may draw up to around 80W (based on the TDP), and 1060s, when pegged at stock settings, typically go about 120W.
Out of habit, I would use a higher quality PSU for the primary (directly connected to the motherboard), and if you choose to make use of your current one, I would use that as a secondary one only for cards/risers.
Your current 600W PSU should be capable of running 3 of the 1060s (3 risers and PCIe power connections on the card) alone. 120W*3=360W << 600W. You may be able to push it to 4, but I wouldn't. Perhaps you could also use this PSU for fans and whatnot.
I'd recommend purchasing a high-quality PSU rated around 700W or 750W for the motherboard/cpu/etc. and the remaining 3x 1060s. (Assuming you don't have a highly unusual number/configuration of drives, RAM, fans, etc.) You could probably get away with a high-quality 600W unit for the motherboard, but I'm bumping it up a bit just in case. The general rule for 24/7 operation with consumer PSUs is to have your estimates avoid straying too far beyond 70% of the rating.
You will want a PSU with plenty of 6 pin or 6(+2) pin PCIe power connectors, if possible. There are adapters that allow you to use 4-pin molex connectors, should you run out. (2x 4-pin molex to 1x 6 or 8 pin PCIe power). I'm not sure if the risers you purchased accept 6-pin, molex, or SATA power, so that's something to check.
Keep in mind that using a dual PSU configuration adds an extra point of failure. (I.e. if EITHER power supply were to fail, it may down the entire rig, and possibly cause damage to other components.) I don't have confidence in DeepCool, but I haven't heard about them. In the end, it's up to you.
That motherboard actually looks like it has 5 usable PCIe slots. (3 physical x16 slots, 1 physical x1, and 1 physical x4).
If the 2 1060s will be your only cards in that rig, you should be able to use 2 of the physical x16 slots without risers. (Making some kind of custom enclosure would be nice, though.)
The card you linked isn't necessary (and alone, it wouldn't be sufficient either) for your current purposes. You have enough PCIe slots for now. Instead, you may be looking for risers such as this one: https://www.newegg.com/Product/Product.aspx?Item=N82E16812119888
These allow you to connect a PCIe x16 graphics card to a PCIe x1 slot on the motherboard. If you expand your rig, you will definitely want these. Having just one for your current plan of 2x 1060s would probably make cooling easier, but isn't absolutely necessary.
Please list your other components, in addition to the two 1060s and this motherboard. Do you have any other graphics cards? What kind of CPU do you have?
So far, I'm thinking a high-quality 600W PSU should have no problem running this rig with 2x 1060s (assuming you have the necessary connectors/adapters), but I'd like to find out more about the rest of your components to get a better picture.
What kind of PSU is it, exactly?
If you plan on purchasing an additional PSU, your requirements depend largely on how far you plan on expanding your rig. The general advice I can give you without that information is to avoid cheaping out on either of your power supplies. A bad PSU can cause a myriad of problems.
PSUs originally manufactured by Seasonic or FSP are typically of high quality. (High-end models from Corsair, EVGA, XFX, etc. come to mind.) Although there's always a chance that any PSU can end up being a dud, there are many models that are usually better, and some that are usually riskier.
If the 2 1060s will be your only cards in that rig, you should be able to use 2 of the physical x16 slots without risers. (Making some kind of custom enclosure would be nice, though.)
The card you linked isn't necessary (and alone, it wouldn't be sufficient either) for your current purposes. You have enough PCIe slots for now. Instead, you may be looking for risers such as this one: https://www.newegg.com/Product/Product.aspx?Item=N82E16812119888
These allow you to connect a PCIe x16 graphics card to a PCIe x1 slot on the motherboard. If you expand your rig, you will definitely want these. Having just one for your current plan of 2x 1060s would probably make cooling easier, but isn't absolutely necessary.
Please list your other components, in addition to the two 1060s and this motherboard. Do you have any other graphics cards? What kind of CPU do you have?
So far, I'm thinking a high-quality 600W PSU should have no problem running this rig with 2x 1060s (assuming you have the necessary connectors/adapters), but I'd like to find out more about the rest of your components to get a better picture.
What kind of PSU is it, exactly?
If you plan on purchasing an additional PSU, your requirements depend largely on how far you plan on expanding your rig. The general advice I can give you without that information is to avoid cheaping out on either of your power supplies. A bad PSU can cause a myriad of problems.
PSUs originally manufactured by Seasonic or FSP are typically of high quality. (High-end models from Corsair, EVGA, XFX, etc. come to mind.) Although there's always a chance that any PSU can end up being a dud, there are many models that are usually better, and some that are usually riskier.
Hi there,
I am new to this forum and new to mining, i need to know something before i buy off my whole rig, i had an old Gigabyte GA-EX58-UD5 which i ordered before for gaming back in the day, now i wanted to mine with this mobo, i ordered (2) gtx 1060 6gb currently, the mobo has 4 pcie slots
https://static.gigabyte.com/Product/2/2958/1053.jpg
can i anyone tell me if using a 1x 3 pcie riser will make it work?
https://ae01.alicdn.com/kf/HTB1K6JrRFXXXXXZXpXXq6xXFXXXZ/PCIe-PCI-E-Riser-Card-1-to-3-PCI-express-1X-slots-Riser-Card-Switch-Multiplier.jpg
Also i had a 80 bronze 600w psu, i will connect two psu's using an add2psu, can anyone tell me the adequate psu power required so i can buy the next psu
Thank you!
I am new to this forum and new to mining, i need to know something before i buy off my whole rig, i had an old Gigabyte GA-EX58-UD5 which i ordered before for gaming back in the day, now i wanted to mine with this mobo, i ordered (2) gtx 1060 6gb currently, the mobo has 4 pcie slots
https://static.gigabyte.com/Product/2/2958/1053.jpg
can i anyone tell me if using a 1x 3 pcie riser will make it work?
https://ae01.alicdn.com/kf/HTB1K6JrRFXXXXXZXpXXq6xXFXXXZ/PCIe-PCI-E-Riser-Card-1-to-3-PCI-express-1X-slots-Riser-Card-Switch-Multiplier.jpg
Also i had a 80 bronze 600w psu, i will connect two psu's using an add2psu, can anyone tell me the adequate psu power required so i can buy the next psu
Thank you!
Jump to: