SupEr3421Senha_SECRETAandGRandE
A special +1 to this one... Thiago: LOL, beleza!!! haha
Topic: A Complete Guide to P2Pool - Merged Mining (BTC/NMC/DVC/IXC/I0C) plus LTC, Linux - page 24. (Read 198782 times)
February 13, 2012, 10:44:07 PM
SupEr3421Senha_SECRETAandGRandE
A special +1 to this one... Thiago: LOL, beleza!!! haha
February 13, 2012, 10:14:20 PM
Fellas!
I just add the info about merged mining using I0Coin too!
Cheers!
Thiago
I just add the info about merged mining using I0Coin too!
Cheers!
Thiago
February 13, 2012, 09:08:12 PM
Guys!
I just add the info about merged mining using IXCoin!
Check it out!
Also, I'm trying to run i0coin but it does not work. Anyone have the source URL of i0coin?!
Cheers!
Thiago
I just add the info about merged mining using IXCoin!
Check it out!
Also, I'm trying to run i0coin but it does not work. Anyone have the source URL of i0coin?!
Cheers!
Thiago
I just find my first IXcoin, 96 IXC for me! LOL
February 13, 2012, 08:26:37 PM
Guys!
I just add the info about merged mining using IXCoin!
Check it out!
Also, I'm trying to run i0coin but it does not work. Anyone have the source URL of i0coin?!
Cheers!
Thiago
I just add the info about merged mining using IXCoin!
Check it out!
Also, I'm trying to run i0coin but it does not work. Anyone have the source URL of i0coin?!
Cheers!
Thiago
February 13, 2012, 07:56:02 PM
How does p2pool know the index/code/ID of each coin type in the list of merged mining hashes?
Does its call to get work for merged mining to the coin's daemon tell it that? As I don't see you telling those numbers in your example of how to start merged mining...
-MarkM-
Does its call to get work for merged mining to the coin's daemon tell it that? As I don't see you telling those numbers in your example of how to start merged mining...
-MarkM-
When you use the P2Pool "--merged" option, it will do the job for you.
I'm working to activate merged mining for IXcoin and I0coin now just for fun... lol
February 13, 2012, 07:36:17 PM
How does p2pool know the index/code/ID of each coin type in the list of merged mining hashes?
Does its call to get work for merged mining to the coin's daemon tell it that? As I don't see you telling those numbers in your example of how to start merged mining...
-MarkM-
Does its call to get work for merged mining to the coin's daemon tell it that? As I don't see you telling those numbers in your example of how to start merged mining...
-MarkM-
February 13, 2012, 04:53:49 PM
February 13, 2012, 04:32:49 PM
is there an IRC for p2pool?
February 13, 2012, 04:05:40 PM
dick!! haha
any way looks like my test rig is just too slow, so ill point my dedicated miner at it and see what happens.
so now i have almost 1.6gh pointed at my p2pool server, still says shares:0.... but my bamt interface shows over 100 shares accepted.. normal? (sorry i know noob... but without asking ill never learn!)
also the expected time to share fluctuates a lot between 24min and 35 min, and it varies both directions.
The lower difficulty shares are for monitoring your rigs. The higher difficulty shares will take a while. It sounds like you have everything working properly.
Edit: High difficulty shares are the ones that count towards payment when mining with P2Pool.
gotcha! well sweet.. going to give this a shot and see how i like it!
i love not paying a fee to a pool op
are there any security concerns with this over a standard mining implementation? i mean obviously wallet protection is key, but anything else?
February 13, 2012, 03:53:50 PM
dick!! haha
any way looks like my test rig is just too slow, so ill point my dedicated miner at it and see what happens.
so now i have almost 1.6gh pointed at my p2pool server, still says shares:0.... but my bamt interface shows over 100 shares accepted.. normal? (sorry i know noob... but without asking ill never learn!)
also the expected time to share fluctuates a lot between 24min and 35 min, and it varies both directions.
NM shares 1
sweet.. just took a while to get cookin but there it is! February 13, 2012, 03:50:02 PM
dick!! haha
any way looks like my test rig is just too slow, so ill point my dedicated miner at it and see what happens.
February 13, 2012, 03:40:47 PM
Question about this (getting further)
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share:
did i miss something?
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share: did i miss something?
Mmm... How much time you are mining using your P2Pool node?!
i pointed my guiminer box directly to it and only it... so i would assume 100%
100%?!
You wait to complete the Bitcoin blockchain download before start P2Pool?!
I guess it is better to ask for help at P2Pool main thread... Because I'm new here too...
https://bitcointalksearch.org/topic/1500-th-p2pool-decentralized-dos-resistant-hop-proof-pool-18313
Anyway, I'll do whatever I can to help you...
dick!! haha
any way looks like my test rig is just too slow, so ill point my dedicated miner at it and see what happens.
February 13, 2012, 03:38:22 PM
i pointed my guiminer box directly to it and only it... so i would assume 100%
No, he means how long has it been mining? And how much Mh/s?
doh, sorry
well its running at 94mh right now just got 4 stale sahres.. so it looks like tis working just my test box is too slow to take advantage
February 13, 2012, 03:32:51 PM
i pointed my guiminer box directly to it and only it... so i would assume 100%
No, he means how long has it been mining? And how much Mh/s?
Yes! That's what I mean... lol
February 13, 2012, 03:32:05 PM
Question about this (getting further)
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival: Expected time to share:
did i miss something?
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share: did i miss something?
Mmm... How much time you are mining using your P2Pool node?!
i pointed my guiminer box directly to it and only it... so i would assume 100%
100%?!
You wait to complete the Bitcoin blockchain download before start P2Pool?!
I guess it is better to ask for help at P2Pool main thread... Because I'm new here too...
https://bitcointalksearch.org/topic/1500-th-p2pool-decentralized-dos-resistant-hop-proof-pool-18313
Anyway, I'll do whatever I can to help you...
February 13, 2012, 03:29:47 PM
i pointed my guiminer box directly to it and only it... so i would assume 100%
No, he means how long has it been mining? And how much Mh/s?
February 13, 2012, 03:23:52 PM
Question about this (getting further)
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival: Expected time to share:
did i miss something?
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share: did i miss something?
Mmm... How much time you are mining using your P2Pool node?!
i pointed my guiminer box directly to it and only it... so i would assume 100%
February 13, 2012, 03:20:58 PM
Question about this (getting further)
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival: Expected time to share:
did i miss something?
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share: did i miss something?
Mmm... How much time you are mining using your P2Pool node?!
February 13, 2012, 03:03:01 PM
Question about this (getting further)
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival: Expected time to share:
did i miss something?
im trying to connect my guiminer on my gaming rig just to see that it works before i direct my new mining rig at this guy.
never mind about username password.. im seeing something odd.
it appears to work, but no shares are being accepted.. just says
New work for worker! Difficulty: 0.999985 Share difficulty: 538.162112 Total block value: 50.057100 BTC including 41 transactions
2012-02-13 13:11:53.547647 P2Pool: 17385 shares in chain (8791 verified/17389 total) Peers: 10 (0 incoming)
2012-02-13 13:11:53.547867 Local: 0H/s in last 0.0 seconds Local dead on arrival:
Expected time to share: did i miss something?
February 13, 2012, 03:00:00 PM
To mergedmine NMC with P2Pool on Ubuntu you just enter the following code after changing 'rpcuser' and 'rpcuserpassword'
* Namecoin
Code:
git clone git://github.com/namecoin/namecoin.git
cd ~/namecoin/src/
make -f makefile.unix namecoind
mkdir ~/.namecoin/
Content of ~/.namecoin/bitcoin.conf:
Code:
server=1
daemon=1
rpcuser=usuarioy
rpcpassword=dasdGfhoiu35BCV47586fgdh234GDFSEG
rpcport=7333
* Namecoin
Code:
git clone git://github.com/namecoin/namecoin.git
cd ~/namecoin/src/
make -f makefile.unix namecoind
mkdir ~/.namecoin/
Content of ~/.namecoin/bitcoin.conf:
Code:
server=1
daemon=1
rpcuser=usuarioy
rpcpassword=dasdGfhoiu35BCV47586fgdh234GDFSEG
rpcport=7333
You need to run 4 commands, git, cd, make and mkdir and, after that, you need to edit the file ~/.namecoin/bitcoin.conf, you can use:
nano ~/.namecoin/bitcoin.conf
And type the content of it within the Nano editor, save the file and start namecoind.
Good luck!
Thiago
Jump to: