Pages:
Author

Topic: A4 Dominator - Pre-Order Group Buy - 280mh, roughly 1000w, $1800 + shipping - page 81. (Read 122577 times)

hero member
Activity: 868
Merit: 517
Thanks everyone for chiming in so far on the group buy.  Innosilicon has responded to my emails and sound like they are going to be supportive of the community here so far from what I am gathering.  

I completely agree with everyone here that we absolutely need more info.  I have invited Innosilicon to join in on this group buy discussion.  I hope to see them join here soon and help us fill in the gaps in the info we have now and tell us more about the A4.  

I would love to see some pictures, and video of this machine hashing, and some actual measurements of the running miner, hash rates, power at the wall, error rates, temps that the miner runs at etc.  A spec sheet with some hardware details and recommendations regarding PSU's etc.  So hopefully we can get more of that info soon so that we can come to an informed decision.

Thanks again everyone, I am making a list of those who have expressed interest even if it is a "maybe".  As we get more info I will follow up with you so we can firm up orders should you decide to proceed.  At some point once we reach our minimum order of 10 we will probably have to set a end date/deadline for the pre-order buy.   So I will keep everyone posted as I hear more.  Hopefully we will all hear directly from Innosilicon in this group buy discussion.

hero member
Activity: 952
Merit: 508
Interested but need more info.

if these things will not come with PSU's will they allow regular ATX PSU's to be used or will it need to be specially made PSU's like the A2 used?
hero member
Activity: 586
Merit: 500
Waiting for my coins to rise !!
I have to say i am very disappointed with the final specs. Need more info before i decide to buy or not. Was looking at 2 or 3 but not sure now.
hero member
Activity: 780
Merit: 501
I would be interested in one or two units, but need more info before I can commit to it.
legendary
Activity: 1456
Merit: 1014
just for the new player in this Field, pre-order turned in most Cases out to be Scam, Delayed or getting Devices which were diffrent from what was offered initially.

Even tho that Inno delivered before at Current Network diff this Device would get $7.66 a Day (calculated with 0.10$ electric Cost)
That means you need 234 Days to ROI.

don't invest money you cannot afford to lose.

legendary
Activity: 1593
Merit: 1004
I will follow but there is not enough information to commit at this point.
legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
hero member
Activity: 868
Merit: 517
If you have a Batch 1 or Batch 2 miner that restarts or drops hash boards:
If you have a Batch 1 and Batch 2 miner you will need to have your miner firmware flashed.  To get your miner flashed please contact Innosilicon and request to have your name added to the list to get the jig shipped to you.  This will fix the restart problem and the dropped hash boards issue.

Send your Inquiry to:
[email protected]
[email protected]
[email protected]
[email protected]
 
Hotline:
Chloe (86) 180-4050-0320 [China]
John 416 732-0107 [US and Canada]

Address:
Optics Valley Wisdom Park, Optics Valley Avenue No.61, East Lake District,
Wuhan, China 430223
Suzhou Industrial Park, Suzhou, China 215123

Latest Version of the software is V2.0.3:
Here is the link: https://www.dropbox.com/s/sis8eoeo6wxoqdv/G5-20-V2.0.3.zip?dl=0

Most initial customer issues have been addressed by Innosilicon regarding firmware, flashing firmware, and miner stability issues.  If you are still having any issues at all with your A4's please reach out to Innosilicon. 

Inno has supported this community very well and have backed up the A4 with not just words, but they have stuck behind their promises.  The A4 is a solid, reliable miner today due to Inno's support and their willingness to open source the software to get the kind of performance needed from the A4.

If you are considering a new A4 today it is a solid and reliable miner for Scrypt coin mining.

-----------------------------------------------------------------------------------------------------------------------------------------------------
Original post for the A4 Pre-order:
Well we finally have the initial details from Innosilicon regarding the A4 Dominator.  It is now available for Pre-Order and we have been provided the following specs for the new miner:

Quote
Update: World Most Profitable A4 Dominator Miner is coming soon! Early batch goes fast with best efficiency ever and very limited quantity, and who are the lucky ones to get the access to the first batch will, with no doubt, enjoy the early gain before anybody else, that means big profit.
 
Pre-order price: 1800 USD per unit plus shipping fee, 5 units to start
 
Estimated delivery time: Starts from August and max delay is one month.
 
Warrantee: 45 days parts warranty
 
Specifications:
l  Part Number: INNOSILICON A4 Dominator 280Mhs per unit (+-10% performance, can be over-clocked at user's risk)
l  Size: Length 28cm * Width 12.8cm * Height 25cm (Inches: Length: 11.02 inches * Width: 5.03 inches * Height: 9.84 inches)
l  Net weight: 11KG (without PSU)
l  ASIC: A4, 80pcs
l  Blade: 4pcs
l  Voltage: +12V
l  Power efficiency: Initial batch will be defaulted at 3.2W/Mhs in Turbo mode, 2.2W/Mhs in Norminal mode, and 1.35W/Mhs in ultra low power mode
l  Required rated PSU: 1000W or above, 8 * PCI-E 6Pin
PSU is external and exclusive to save your international shipping cost, which can be acquired used easily at low cost or reused from old version miners.
l  Included: Raspberry Pi, it is plug and play with your PSU

Link to the Innosilicon Web Site for further info:
http://www.innosilicon.com/

We were given a few details about the hash rates:
Quote
The hash rate per box is different from what we expected, but it's based on sample chip performance tested in the lab. And still A4 Dominator has the best efficiency ever, and we determined the price based on the specs.

Quote
Shipping fee via our DHL channel is more than 70% off the list price, and will be paid before delivery after we know the actual weight of the machines.

I have asked about setting up a group buy here on BCT and would like to start the conversation about how many people would be interested in getting into this group buy.  We need a minimum order of 10 units to place an order.  I have ask about doing this with Chloe at Innosilicon and I am awaiting a reply back now.  

I have also asked for more details, pictures, video of the running miners like what they have done in the past with the A2 so we can see what it is we are talking about and an idea of what this miner looks like in action.

So I guess the question here in this thread is do you want to be in the group buy?  If so how many units do you want?  

Of course there are a lot of details to iron out yet, but now is the time to get that ball rolling.  If you have experience here on BCT organizing a group buy or have experience setting something like this up please feel free to chime in.  We can use all the input we can get as we organize this group buy.  

UPDATE 1: I received a response from Innosilicon regarding the inquiry on the A4, a group buy, and possibly extending the warranty.  Also they have a demo video for the A4 chip.  I punched in the numbers they quote in the video and they don't appear to match what is provided for the miner.  So I will ask for more info.  I will be sharing the link to this group buy post with them so that they might join in the conversation and possibly facilitate the group buy.  They have offered to extend the warranty to 45 days vs the 30 days and explained that it is parts replacement warranty due to shipping costs.  So if we have a bad board or module they will ship the replacement part instead of the back and forth trying to ship entire units.  

UPDATE 2: We have an update regarding the A4 miner, and the ship dates have moved forward to August-Sept.

Here is the demo video for the 14nm A4 chip:
http://v.youku.com/v_show/id_XMTYwMTEwMTcyNA==.html?qq-pf-to=pcqq.c2c
Pages:
Jump to: