About gas gwei for send out token from myetherwallet

karmapala

jr. member

Activity: 135

Merit: 1

https://darbfinance.com/

Quote from: xianbits on December 03, 2018, 08:24:25 AM

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

I don't think the tokens themselves matter. Maybe, you were sending on different time and in one of those times, it was a peak hour and the other one is not. I'm also using 4gwei on most of my token transfer, fortunately, they were all successful.

I often use 4Gwei gas for transactions, for example, yesterday I did an IZX token send out transaction using 4Gwei and it was successful but when I sent the DARICO token, I used the same gas but there was a gas notification that was very lowaffect the cost of gas used.

awakpane

member

Activity: 1274

Merit: 12

right. I also experienced this before when I wanted to send a token from myetherwallet to exchange it when I used 4 gwei failed. but after I submitted to the rules it turned out that gwei could change at any time. therefore before we send the token from myetherwallet, we need to check the gwei first so that the delivery of the token does not fail.

UAE Seasider

full member

Activity: 700

Merit: 110

Helios Protocol https://discord.gg/cpzAEMB

It really depends how busy the network is, you can try to use ethgasstation.info to gauge the right amount to set your GWEI at, however, I have sometimes found this to be inaccurate and had to choose a GWEI setting higher than the recommended just to get it to work.

Take care with your gas limits also as sending ERC-20 tokens requires more than just sending ETH they are generally set automatically for you but occasionally you need to increase that also especially if you find the tx running out of gas.

Alpha0One1

full member

Activity: 588

Merit: 107

Quote from: MishaSER on December 02, 2018, 09:32:08 AM

I always use services that shows what recommended gas https://ethgasstation.info/. With the help of this site you can see what will happen with the increase of gas.

Same here. I always check ethgastation before sending any eth or tokens. You could be setting it too low and wait several hours before miners pickup your transaction.

Vaniaayu

full member

Activity: 476

Merit: 101

I haven't experienced it, but I've heard about gas 4 gwei, many people say the gas is lower and the speed of delivery is also very amazing, I know a little if there is one token that can't use it

AgentZero23

member

Activity: 644

Merit: 10

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

No need to adjust the gwei because the mew is automatically set the gas price. Low gas means you set the gwei to low and you need to set the gas high in order to process your request.

qazgroup

member

Activity: 1022

Merit: 20

RiveMont

I think you are using less gwei because there was also some congestion in the eth network from past few days so may be you need to increase the gwei amount, i will suggest to set gwei over 10 in situation of network congestion.

Sicithdeve

jr. member

Activity: 238

Merit: 1

http://www.securix.io/

Quote from: terrific on December 03, 2018, 08:32:47 AM

If its unsuccessful then you have to increase your fee.
That's how you should make it successful, sometimes they aren't the same.
Fees such as gwei's are increasing depending on the network.

myetherwallet will never let down its users so i think tt the only good decision here is let them know about the mistake

Sicithdeve

jr. member

Activity: 238

Merit: 1

http://www.securix.io/

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

myetherwallet is one of them best right now ad i have heard they have a grsat support team so you can ask them what they think about it

terrific

hero member

Activity: 2338

Merit: 517

Catalog Websites

If its unsuccessful then you have to increase your fee.
That's how you should make it successful, sometimes they aren't the same.
Fees such as gwei's are increasing depending on the network.

Sanford

jr. member

Activity: 462

Merit: 1

Quote from: JimmyNg90 on December 03, 2018, 07:32:31 AM

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Have you experience about it?

2 important things need to remember when you send the token. Gas limit and Gas price.

1. Always set high Gas limit. If you do not sure how many is enough, you can set 100K - 150K.

2. There are 2 choices. Hurry: 10-15 Gwei. Have alot freetime: 3-5 Gwei.

And it seems that I have not failed to send any token with my solution.

Great example. I think it is not necessary to calculate to share. I often use 10 Gwei and everything works fine. It all depends on your needs.

Hadarula

jr. member

Activity: 252

Merit: 1

EVERID Decentralized platform for a new Economy

Quote from: icalical on December 03, 2018, 08:28:34 AM

First of all, the recommended gas to send any ERC20/eth token is 8gwei, but it also mainly affected by the ETH network. When the network is busy filled with so many transaction the price of ethereum gas to send your token will be increased. To make sure your transaction is sent successfully, refer to http://ethgasstation.info to check the currently recommended gas. On the other hand, if you use wallet such as myetherwallet, usually their default gas is already meet the currently recommended gas.

thatnk you verh much for such a good answer an di hope that you will believe in myetherwallet nusg like i do

Hadarula

jr. member

Activity: 252

Merit: 1

EVERID Decentralized platform for a new Economy

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

myetherwaleet is one of the best wallets right now so i think if you have any problej with them just let them know

icalical

sr. member

Activity: 1400

Merit: 268

Fully Regulated Crypto Casino

First of all, the recommended gas to send any ERC20/eth token is 8gwei, but it also mainly affected by the ETH network. When the network is busy filled with so many transaction the price of ethereum gas to send your token will be increased. To make sure your transaction is sent successfully, refer to http://ethgasstation.info to check the currently recommended gas. On the other hand, if you use wallet such as myetherwallet, usually their default gas is already meet the currently recommended gas.

xianbits

sr. member

Activity: 910

Merit: 257

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

I don't think the tokens themselves matter. Maybe, you were sending on different time and in one of those times, it was a peak hour and the other one is not. I'm also using 4gwei on most of my token transfer, fortunately, they were all successful.

Vilagra

full member

Activity: 672

Merit: 109

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Ask about gas gwei that use for send some token from myetherwallet to exchange.
Iam ever try send some token to market exchange.i try low gas gwei when i send my token to exchange..i try use 4 gwei.
But why when i use 4 gwei ,any token succesful send out but other token failed use 4 gwei,any info about low gas gwei,
what the factor that make token succesful send out or failed send out when we just use 4 gwei ,
Have you experience about it?
What your opinion?

I use this service https://ethgasstation.info/ to find out which gwei is now for quick transaction, usualy I set gwei from item "gas price std" and transaction takes a few minutes but if you are ready to wait for 10-60 minutes you can use "Gas Price SafeLow ".

diouf67

full member

Activity: 260

Merit: 104

If you use a lower gwei you normally need to set a higher gas limit or else your transaction might not go through. Very rarely will it use the full gas limit but the transaction won't be accepted otherwise because it's based on an average length for the transactions to be processed.

JimmyNg90

copper member

Activity: 196

Merit: 0

Quote from: karmapala on December 02, 2018, 09:25:22 AM

Have you experience about it?

2 important things need to remember when you send the token. Gas limit and Gas price.

1. Always set high Gas limit. If you do not sure how many is enough, you can set 100K - 150K.

2. There are 2 choices. Hurry: 10-15 Gwei. Have alot freetime: 3-5 Gwei.

And it seems that I have not failed to send any token with my solution.

Alluro

member

Activity: 742

Merit: 19

Please check out https://etherscan.io/gastracker before you make a transaction. Because the gas price is changing every time. I personally believe 4 gwei is too low to send ERC20 token transactions. Yes, sometimes it works. But not every time. It has a chance to fail your transactions.

10BTCaDay

full member

Activity: 770

Merit: 100

Oikos.cash | Decentralized Finance on Tron

I always put the most minimal gas if I'm not in a hurry. if I need to send my ETH quickly, for example, to participate in good ICO, then I put more gas

Topic: About gas gwei for send out token from myetherwallet (Read 299 times)